All Coatings

DESCRIPTIONHPP is a two-component, fast curing polyaspartic coating system designed as a decorative yet durable coating for commercial and industri...

MPC-100 is a 2-component, 100% solids, self-leveling and high-build epoxy floor coating. It is designed to be used as a protective floor coating o...

(TUE) is a high solids epoxy. It can be used as a prime coat, build coat or grout coat and is also used in pigmented and decorative flakes and qu...

 Single-Component, Low Odour, Low VOC, Urethane Membrane Vulkem® 350NF Base Coat is a single-component, low odor, low VOC, urethane membrane that ...

Metallic Epoxy Pigments metallic collection   🔹AppleGreen🔸AztecGold🔹BlackPearl🔸Bronze-Brown🔹ChestnutBrown🔸Cofee🔹SilverGrey🔸SilverPearl 🔹Lus...

MPC-301 is a 2-component, high solids, polyurethane-based aliphatic coating designed as a stable, chemically resistant, UV-stable topcoat. It give...

TCU is a two-component abrasion, chemical and stain resistant, UV stable aliphatic polyester polyurethane finish coat. It is available in clea...

Vulkem 346 Top Coat is an aliphatic one-component polyurethane that is applied after the Vulkem 346 intermediate coat has cured. Interlaminary adh...

Sikaflex®-1A is a premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Sikaflex-1a can b...

Vulkem 950NF Top Coat is a two-component polyurethane that is applied after the Vulkem 350NF base coat has cured. Interlaminary adhesion to Vulkem...

Dymonic 100 Gray 300 ML High Performance polyurethane waterproofing sealant Download Data Sheet   Keywords:🔸 Where to buy Home Depot, Caulk...

High-Modulus Epoxy Bonding AgentPlanibond EBA is a two-component, multipurpose, high-modulus epoxy bonding agent. Planibond EBA is nonshrink, 100%...

Vulkem 360NF Base Coat is a low odor, low VOC, water-cured, rapid setting urethane membrane that bonds firmly to clean, dry concrete and metal. It...

Cup Wheel Diamond Disk 7 and 5 inch   6 Arrow segments 15mm height 30 grit soft bond Central hole 5/8"-11 thread   Keywords:🔸 Where to buy Gr...

MAPECRETE HARD LI Lithium Silicate Densifier and Sealer for Concrete Mapecrete Hard LI is a water-based, VOC-free, lithium silicate solution use...

Vulkem 351 Top Coat is an aliphatic, single-component polyurethane, which when used in conjunction with the recommended aggregate, creates a tough...

Sika® Level-01 PrimerCA is a one-component, water-dispersed, solvent-free, acrylic-based solution used to prime and seal floor surfaces prior to t...

Mapefloor Finish 58 W   Two-Component, Clear, Matte, Aliphatic Polyurethane Coating Mapefloor Finish 58 W is a two-component, aliphatic poly...

Vulkem® 45SSL  semi-self-leveling, single-component, moisture-curing, low-modulus, polyurethane sealant.     Download Data Sheet Keywords...

Sika® Loadflex®-524 EZ is a technologically advanced, two-component, quick-setting, semi-rigid, solvent-free, selflevelling control joint filler. ...

Vulkem 191 QD Primer   PRODUCT DESCRIPTION Vulkem 191 QD Primer is a quick-drying, one-part, moisture-curing primer for use to promote interla...

B-TUFF® 5600 4.5-gallon kit A Two Component, Solvent Free, Vehicular and Pedestrian Traffic Deck Coating   B-Tuff® 5600 is a warranted system that...

PLANISEAL WR 100 Clear, 100%-Silane, Penetrating Water Repellent Planiseal WR 100 is a clear, high-performance, 100%-silane, penetrating water re...

Sika® Florseal WB-18 & -25 are a ready-to-use; water-based, clear, high gloss, non-yellowing, acrylic emulsion cure and seal. They are applied...