Novoplan 2 Plus Professional, Self-Leveling Underlayment

Mapei Novoplan 2 Plus | Professional Self-Leveling Underlayment

High-Strength, Self-Leveling, Cement-Based Underlayment and Repair Mix | Brand: Mapei

Mapei Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment and repair mix for levelling, smoothing, and repairing interior floors before the installation of floor coverings. For use over concrete and engineer-approved wood subfloors. Confirm suitability, coverage, cure time, and system compatibility against the current Mapei TDS, SDS, and project specification before use.

Key Characteristics

• Self-leveling — designed for levelling and smoothing interior floor surfaces; confirm application thickness requirements against the current TDS.
• Application thickness — 10 to 150 mm; confirm minimum and maximum thickness requirements for your application against the TDS.
• Radiant heat compatible — designed for use over radiant-heated floors and to encapsulate hydronic or electric radiant-heated floors; confirm installation requirements against the TDS.
• Return to service — confirm cure and overlay times against the current TDS as they vary with temperature, humidity, and application thickness.
• Packaging — 50 lbs (22.7 kg)

Typical Applications

• Levelling and smoothing interior concrete subfloors before floor covering installation
• Levelling and smoothing engineer-approved wood subfloors
• Encapsulating radiant-heated floor systems
• Interior residential, commercial, and institutional applications

Limitations

• Interior use only — confirm suitability for exterior applications against the TDS before specifying.
• Confirm substrate suitability and surface preparation requirements against the current TDS before use.
• Cure and overlay times are temperature and humidity dependent — confirm against the current TDS.
• Wood subfloors must be engineer-approved — confirm substrate requirements against the TDS.

Canopus Supply Inc. — Mapei Products, Metro Vancouver & BC

Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.