Enhance Safety and Durability with Tremco Traffic Coating Products
Overview:
A technical reference on Tremco traffic coating products supplied by Canopus Supply, for waterproofing contractors, restoration contractors, concrete coating installers and commercial builders specifying traffic-bearing membrane systems for pedestrian and vehicular areas.
About Tremco Traffic Coatings
Tremco manufactures traffic coating membrane systems used to waterproof and protect pedestrian and vehicular surfaces such as parking decks and balconies. System selection, build-up and detailing should be confirmed against the manufacturer’s specification and current TDS.
Typical System Attributes (confirm against the manufacturer’s TDS):
1. Protection: Traffic coatings form a continuous membrane intended to protect the substrate from traffic, weather, UV exposure and chemical contact. Confirm exposure ratings and limitations against the TDS.
2. Service life: Specified to provide durable, traffic-bearing protection. Maintenance and recoat intervals should follow the manufacturer’s documentation.
3. Slip resistance: Available with aggregate broadcast for slip-resistant wearing surfaces. Confirm the specified aggregate and topcoat for the required surface texture.
4. System options: A range of pedestrian and vehicular assemblies is available, including decorative and high-traffic configurations. Match the system to the deflection, traffic and detailing requirements of the project.
5. Performance: Specify and apply in accordance with the manufacturer’s TDS, hold points and detailing requirements to achieve the intended performance.
Typical Applications:
- Parking Decks
- Pedestrian Walkways
- Balconies and Patios
- Stadiums and Arenas
- Industrial Facilities
- Commercial Buildings
Specification Notes:
Substrate preparation, primer, membrane thickness, aggregate broadcast and topcoat must be matched to the project specification and site conditions. Contact Canopus Supply for product availability and manufacturer documentation.
Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.
A technical reference on Tremco traffic coating products supplied by Canopus Supply, for waterproofing contractors, restoration contractors, concrete coating installers and commercial builders specifying traffic-bearing membrane systems for pedestrian and vehicular areas.
About Tremco Traffic Coatings
Tremco manufactures traffic coating membrane systems used to waterproof and protect pedestrian and vehicular surfaces such as parking decks and balconies. System selection, build-up and detailing should be confirmed against the manufacturer’s specification and current TDS.
Typical System Attributes (confirm against the manufacturer’s TDS):
1. Protection: Traffic coatings form a continuous membrane intended to protect the substrate from traffic, weather, UV exposure and chemical contact. Confirm exposure ratings and limitations against the TDS.
2. Service life: Specified to provide durable, traffic-bearing protection. Maintenance and recoat intervals should follow the manufacturer’s documentation.
3. Slip resistance: Available with aggregate broadcast for slip-resistant wearing surfaces. Confirm the specified aggregate and topcoat for the required surface texture.
4. System options: A range of pedestrian and vehicular assemblies is available, including decorative and high-traffic configurations. Match the system to the deflection, traffic and detailing requirements of the project.
5. Performance: Specify and apply in accordance with the manufacturer’s TDS, hold points and detailing requirements to achieve the intended performance.
Typical Applications:
- Parking Decks
- Pedestrian Walkways
- Balconies and Patios
- Stadiums and Arenas
- Industrial Facilities
- Commercial Buildings
Specification Notes:
Substrate preparation, primer, membrane thickness, aggregate broadcast and topcoat must be matched to the project specification and site conditions. Contact Canopus Supply for product availability and manufacturer documentation.
Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.
