Skip to content
img
Tremco - Residential

TUFF-N-DRI® H8

Polymer-Enhanced Asphalt TUFF-N-DRI® H8 membrane elongates to span concrete shrinkage cracks. As concrete settles, cracks naturally form in the foundation wall. TUFF-N-DRI is specially formulated to span these cracks, sealing against water leaks and keeping water out of basements. Water pressure can build up on the outside of basement walls during a rain storm. TUFF-N-DRI H8 withstands 8 ft. of water pressure (hydrostatic head pressure while competitive product usually provides around 1 ft. of resistance. This means that even over cracks TUFF-N-DRI is protecting basement walls and keeping water out while competitive membrane fails at as little as 12 in. of water pressure.

Download Data Sheet

TUFF-N-DRI® XTS

Polymer-Modified Asphalt Emulsion TUFF-N-DRI® XTS is the highest performing extension of the most recognized waterproofing brand in the residential new construction market, with 12 feet of hydrotastic head pressure resistance. TUFF-N-DRI XTS is performance-engineered and field-tested to provide the greatest resistance to hydrostatic head pressure of any polymer-modified asphalt emulsion waterproofing membrane in the category. Now, TUFF-NDRI XTS is designed to withstand 12 feet of hydrostatic head pressure, while maintaining its ease of use, consistency of manufacture and long-term durability characteristics.

Download Data Sheet

TUFF-N-DRI® Classic

Basement Waterproofing Membrane TUFF-N-DRI® Classic is a flexible waterproofing membrane, spray -applied to seamlessly span foundation wall shrinkage cracks and seal out water penetration. TUFF-N-DRI Classic’s exceptional ability to hang on the wall to build to a targeted thickness allows it to span foundation wall cracks of up to 1/8”. Basic Uses Suitable for use in backfilled, unsubmerged residential waterproofing applications. TUFF-N-DRI Classic is compatible with cast in place and poured concrete foundations.

Download Data Sheet

TUFF-N-DRI® Quick Cure 90

Quick Cure Waterproofing Membrane TUFF-N-DRI® Quick Cure 90 membrane seals water leaks and elongates to span concrete shrinkage cracks that naturally occur from settling in the foundation wall. TUFF-N-DRI Quick Cure 90 cures at a rate that is up to 90% faster than our traditional TUFF-N-DRI waterproofing membrane. Basic Uses Suitable for foundation and basement walls in unsubmerged conditions. TUFF-N-DRI QC 90 is compatible with cast in place, poured concrete and shotcrete foundations.

Download Data Sheet

WATCHDOG® H3

Spray-Applied, Polymer-Enhanced, Asphalt Membrane WATCHDOG® H3 delivers a consistent thickness for maximum waterproofing performance when it cures to 40 mils. It is performance-engineered to hang in place on the wall, eliminating product waste and providing exceptional waterproofing protection. WATCHDOG WATERPROOFING is designed for use with a foundation drainage system consistent with local codes and good construction practices. A typical exterior drainage system consists of 75-100mm (3 or 4-inch) minimum perforated drainage pipe, with gravel over the pipe, on the footer and up the face of the vertical wall, or as specified by local code. The drain tile should channel water to either an operating sump pump or to daylight. The grade should always slope away from the foundation.

Download Data Sheet

WATCHDOG® Classic

Basement Waterproofing Membrane WATCHDOG® Classic is a flexible polymer-enhanced waterproofing membrane that provides reliable, leak free protection Designed for spray application on poured concrete and parged block walls, WATCHDOG Classic seamlessly bridges shrinkage cracks and seals out water penetration. The WATCHDOG Classic membrane remains elastic at low temperatures for dependable year round waterproofing protection. WATCHDOG Classic is suitable for foundation and basement walls in unsubmerged residential applications.

Download Data Sheet

WATCHDOG® Quick Cure 90

Quick Cure Waterproofing Membrane The unique formulation of WATCHDOG® Quick Cure 90 allows the membrane to cure up to 90% faster than the traditional WATCHDOG Waterproofing membranes, while maintaining 3ft hydrostatic head resistance. WATCHDOG Quick Cure 90 has the exceptional ability to hang on poured concrete and parged block walls to easily build targeted thickness. Tight construction schedules and in coming inclement weather are no match for the set up and cure times of WATCHDOG Quick Cure 90. Basic Uses Typical applications for WATCHDOG QC 90 include foundation and basement walls and most backfilled, unsubmerged residential applications. Compatible with cast in place, poured concrete, and shotcrete. Approved for use over insulated concrete forms (ICF).

Download Data Sheet

IMPAX wb+

Polymer-Modified Asphalt Emulsion Foundation walls are guaranteed to be dry for up to 15 years with tough, durable IMPAX™ wb+ Waterproofing. This polymer-modified asphalt emulsion carries the heavy load of keeping water out of your basement and keeping your home dry and comfortable. When used in combination with FG Board, IMPAX wb+ provides waterproofing and thermal protection to your foundations. Provides flexibility to bridge non-structural foundation cracks.

Download Data Sheet

Horizon Foundation Finishing System

Foundation Waterproofing The Horizon Foundation Finishing System brings new levels of moisture and insulation protection to a formerly neglected area of foundation - from grade line to sill plate. Horizon combines principles of barrier science, aesthetic design and rugged durability like no other above-grade foundation product. There are two options of Horizon Finishing Systems: Horizon Coating System - a two-part barrier system that starts with proven below-grade foundation waterproofing protection and completed with your choice of highly durable Horizon Coarse Coat or Horizon Matte Coat from the grade-line to the sill plate. Read our data sheet for more information. Horizon Insulated System - a three-part barrier system that starts with TUFF-N-DRI Basement Waterproofing System on the exterior foundation wall, providing an uninterrupted moisture barrier that protects from the footing to the sill plate. Read our data sheet for more information.

Download Data Sheet

DrainStar® Stripdrain

Foundation Drainage DrainStar® Stripdrain product is designed to be used in combination with TUFF-N-DRI® and WATCHDOG WATERPROOFING® products. With DrainStar, your Tremco Contractor can install an effective foundation drainage system at the same time as your basement waterproofing system. You'll save scheduling time and hassles with just one contractor contact. DrainStar can replace traditional drain tile and gravel systems, bringing you a variety of attractive advantages.

Download Data Sheet

DrainStar® Wall Drain

Prefabricated Soil Sheet for Below-Grade Waterproofing DrainStar® Wall Drain is a two-part prefabricated soil sheet drain designed to control below grade water. The fabric allows water to pass into the drain core, while restricting soil particles from entering. The core allows water to gravity drain to the installed drain tile and gravel system of Drain Strip Drain System, and then to the designated drainage exits, such as daylight, a sump crock, or weep hole exits. ac_unit Do not install materials when ambient temperatures are below 20°F (-7°C) help whatshot Do not install materials when ambient temperatures are above 100°F (38°C) help

Download Data Sheet

Warm-N-Dri®

Rigid Fiberglass Insulation Drainage Board Warm-N-Dri® foundation board keeps foundation wall temperatures closer to the air temperature of the basement, which helps reduce interior condensation. Reduced condensation ensures a less humid, more comfortable basement space. The placement of Warm-N-Dri foundation board on the wall’s exterior also helps to reduce the risk of damage due to freeze/thaw cycles particularly if the foundation board is extended to the sill plate. Basic Uses Warm-N-Dri is installed in vertical applications where TUFF-N-DRI has been applied to basement walls. Warm-N-Dri protects the installed TUFF-N-DRI waterproofing membrane, channels water to the drainage system and insulates basement walls.

Download Data Sheet

TUFF-N-DRI® Barrier Board

Rigid Fiberglass Insulation Drainage Board TUFF-N-DRI® Barrier Board is designed for use with TUFF-N-DRI waterproofing membranes. The unique proven fiberglass design promotes efficient water drainage and the retention of the board’s R-value. Barrier Board acts as a protection course for TUFF-N-DRI waterproofing membranes. The ability to quick set TUFF-N-DRI boards into curing TUFF-N-DRI membranes allows for same day, efficient installation of a drainage. Basic Uses TUFF-N-DRI Barrier Board is installed in vertical applications, where TUFF-N-DRI has been applied to typical applications such as foundation walls. Barrier Board protects the waterproofing membrane, channels water to the drainage system and insulates foundation walls.

Download Data Sheet

Energy Board

Rigid Fiberglass Insulation Drainage Board Energy Board, designed for use with WATCHDOG Waterproofing® membranes, keeps foundation wall temperatures closer to the air temperature of the basement, reducing condensation. The compressibility of Energy Board will also absorb moderate soil expansion and serve as a protection course for the basement wall. Many states have adopted energy codes that require basement insulation. WATCHDOG Waterproofing + Energy Board provides insulation performance and assists with compliance to these codes. Basic Uses Energy Board is installed in vertical applications, where WATCHDOG Waterproofing has been applied to typical applications such as foundation walls. Energy Board protects the waterproofing membrane, channels water to the drainage system and insulates foundation walls.

Download Data Sheet

EnForce Board

Non-woven Thermoplastic Protection Board EnForce Protection Board is a non-woven synthetic thermoplastic board designed to protect water-proofing membrane from backfill damage and aid the drainage of water away from the foundation wall. The non-woven thermoplastic fibers embed into wet waterproofing membrane to create a monolithic system. Designed to work with WATCHDOG Waterproofing® Membranes, EnForce protects against water and backfill damage, ensuring your waterproofing stays in place and moisture is directed to the foundation drainage system.

Download Data Sheet

TREMPRO™ 160

Single-Component Asphalt Emulsion Waterproofing Membrane TREMPRO™ 160 is a flexible waterproofing membrane, roller-applied or spray-applied to seamlessly span foundation wall shrinkage cracks and seal out water penetration. Basic Uses Typical applications for TREMPRO 160 include foundation and basement walls and most backfilled, unsubmerged residential applications. TREMPRO 160 is compatible with cast in place, poured concrete, shotcrete, and Nudura® Insulated Concrete Forms (ICF). Can be applied to damp or green concrete allowing application more quickly after the removal of forms or following wet weather. Exceptional ability to hang on the wall and build targeted thickness, spanning below grade foundation wall cracks of up to 1/8 in with a cured thickness of 60 mils. Extreme durability with exceptional elongation and crack-bridging characteristics. Seamless monolithic waterproofing membrane. ac_unit Minimum 20°F (-7°C) help

Download Data Sheet

MULSEAL

Spray-Applied Asphalt Emulsion MULSEAL dampproofing is smoothly spray-applied – avoiding the time-consuming and inconsistent application that comes from brushing or rolling. Spray application fills pores in the substrate, improving the bond with the foundation wall. MULSEAL dampproofing is water-based and can be installed on damp or green concrete. A quality MULSEAL dampproofing application can be installed in one hour or less on a typical foundation.

Download Data Sheet

EasyDri Crack Seal

Single-Component Polyurethane Sealant EasyDri™ Crack Seal allows basement walls to be treated while they are still wet. Unlike conventional crack injection, which requires the walls be completely dry, EasyDri Crack Seal can be used right away. That means treating more walls sooner without the need to wait. Within only 8 hours of installation, EasyDri provides up to 8 feet of hydrostatic head resistance on the interior walls. This protection continues to strengthen over the next 24 hours as EasyDri cures to its full waterproofing potential, keeping areas free of moisture.

Download Data Sheet

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods