Skip to content
img
Tennant - All Tennant Floor Coating Products

Browse Tennant Materials to view Technical and safety data sheets

291 Grit (60 mesh)

For use in areas where water or spillage creates a need for extra traction​​​​

Download Data Sheet

409 Pre-Kote Cleaner

Etchant​​​

Download Data Sheet

ChemXP™-Nov

ChemXP-Nov is an epoxy novolac floor coating, ideal for secondary containment areas exposed to caustic and highly acidic chemicals.​​​​ Key Features of ChemXP™-Nov Can be applied as a broadcast, stand-alone, or trowel system Low odor formula ChemXP-Nov is available pre-pigmented in a Crimson and Industrial Gray colors Application First prime the floor with ChemXP-Nov Primer at 160-200 SF/Gal on Concrete (2-5 mils) Apply a basecoat of ChemXP-Nov at 60-72 SF/Gal (20-24 mils) with full broadcast into wet coating Then, apply a topcoat of ChemXP-Nov at 72-96 SF/Gal (20-24 mils) Color and Size Options Color options: Clear, Crimson and Industrial Gray Available sizes: 3 gallon, 15 gallon and 45 gallon units ChemXP-Nov Clear – 3 gallon unit Part number 9017423 Kit Includes: ChemXP-Nov Clear Part A – 2 gallon (Qty 1) ChemXP-Nov Part B – 1 gallon (Qty 1) ChemXP-Nov Clear – 15 gallon unit Part number 9017425 Kit Includes: ChemXP-Nov Clear Part A –5 gallon (Qty 2) ChemXP-Nov Part B – 5 gallon (Qty 1) ChemXP-Nov Clear – 45 gallon unit Part number 9017427 Kit Includes: ChemXP-Nov Clear Part A – 30 gallon (Qty 1) ChemXP-Nov Part B – 5 gallon (Qty 3) ChemXP-Nov Crimson – 3 gallon unit Part number 9017427 Kit Includes: ChemXP-Nov Crimson Part A – 2 gallon (Qty 1) ChemXP-Nov Part B – 1 gallon (Qty 1) ChemXP-Nov Crimson – 15 gallon unit Part number 9017426 Kit Includes: ChemXP-Nov Crimson Part A – 5 gallon (Qty 2) ChemXP-Nov Part B – 5 gallon (Qty 1) ChemXP-Nov Crimson – 45 gallon unit Part number 9017428 Kit Includes: ChemXP-Nov Crimson Part A – 30 gallon (Qty 1) ChemXP-Nov Part B – 5 gallon (Qty 3) ChemXP-Nov Industrial Gray – 3 gallon unit Part number 9015148 Kit Includes: ChemXP-Nov Industrial Gray Part A – 2 gallon (Qty 1) ChemXP-Nov Part B – 1 gallon (Qty 1) ChemXP-Nov Industrial Gray – 15 gallon unit Part number 9015151 Kit Includes: ChemXP-Nov Industrial Gray Part A – 5 gallon (Qty 2) ChemXP-Nov Part B – 5 gallon (Qty 1) ChemXP-Nov Industrial Gray – 45 gallon unit Part number 9015203 Kit Includes: ChemXP-Nov Industrial Gray Part A – 30 gallon (Qty 1) ChemXP-Nov Part B – 5 gallon (Qty 3)

Download Data Sheet

ChemXP™-Nov Primer

ChemXP-Nov Primer is a low viscosity, epoxy based resin, used as the prime coat in ChemXP-Nov and ChemXP-Nov Flake systems.​​​​ Key Features of ChemXP™-Nov Primer Excellent adhesion to both concrete and steel substrates Provides excellent resistance to rust and undercutting Low odor formula Application For application on concrete substrates, apply ChemXP-Nov Primer at 160-200 SF/Gal (2-5 mils) For application on steel substrates, apply ChemXP-Nov Primer at 250-300 SF/Gal (2-5 mils) ChemXP-Nov Primer is always applied as a clear resin Color and Size Options ChemXP-Nov Primer is clear in color. Not available in other color options. ChemXP-Nov Primer – .75 gallon unit Part number 9016483 Kit Includes: ChemXP-Nov Primer Part A - 0.5 gallon (Qty 1) ChemXP-Nov Primer Part B - 0.25 gallon (Qty 1) ChemXP-Nov Primer – 3 gallon unit Part number 9015143 Kit Includes: ChemXP-Nov Primer Primer Part A – 2 gallon (Qty 1) ChemXP-Nov Primer Part B - 1 gallon (Qty 1) ChemXP-Nov Primer – 15 gallon unit Part number 9015146 Kit Includes: ChemXP-Nov Primer Primer Part A – 5 gallon (Qty 2) ChemXP-Nov Primer Part B - 1 gallon (Qty 5) ChemXP-Nov Primer – 45 gallon unit Part number 9016486 Kit Includes: ChemXP-Nov Primer Primer Part A – 30 gallon (Qty 1) ChemXP-Nov Primer Part B - 5 gallon (Qty 3)

Download Data Sheet

ChemXP™-NovVE

ChemXp-NovVE is a Novolac Vinyl Ester coating, designed for chemical resistance against aliphatic and aromatic solvents, as well as concentrated organic and inorganic acids.​​ Key Features of ChemXP™-NovVE Excellent for use in high traffic areas Holds up well in chemical process and storage, loading and secondary containment areas Can be applied as a standalone, broadcast or trowel system ChemXP-NovVE is available pre-pigmented in Clear, Crimson and Industrial Gray Colors Application For applications on concrete substrates, apply ChemXP-VE Primer at 160-200 SF/Gal on Concrete (2-5 mils) Apply basecoat of ChemXP-NovVE at 60-72 SF/Gal (20-24 mils) with full broadcast into wet coating Then, apply a topcoat of ChemXP-NovVE at 72-96 SF/Gal (20-24 mils) Color and Size Options Color options: Clear, Crimson and Industrial Gray Available sizes: 4 gallon and 50 gallon units ChemXP-NovVE Clear – 4 gallon unit Part number 9017441 Kit Includes: ChemXP-NovVE Clear Part A – 4 gallon (Qty 1) ChemXP-VE Part B – 8 ounce (Qty 1) ChemXP-NovVE Clear – 50 gallon unit Part number 9017444 Kit Includes: ChemXP-NovVE Clear Part A – 50 gallon (Qty 1) ChemXP-VE Part B – 1 gallon (Qty 1) ChemXP-NovVE Crimson – 4 gallon unit Part number 9017442 Kit Includes: ChemXP-NovVE Crimson Part A – 4 gallon (Qty 1) ChemXP-VE Part B – 8 ounce (Qty 1) ChemXP-NovVE Crimson – 50 gallon unit Part number 9017445 Kit Includes: ChemXP-NovVE Crimson Part A – 50 gallon (Qty 1) ChemXP-VE Part B – 1 gallon (Qty 1) ChemXP-NovVE Industrial Gray – 4 gallon unit Part number 9017443 Kit Includes: ChemXP-NovVE Industrial Gray Part A – 4 gallon (Qty 1) ChemXP-VE Part B – 8 ounce (Qty 1) ChemXP-NovVE Industrial Gray – 50 gallon unit Part number 9017446 Kit Includes: ChemXP-NovVE Industrial Gray Part A – 50 gallon (Qty 1) ChemXP-VE Part B – 1 gallon (Qty 1

Download Data Sheet

ChemXP™-NovVE Flake

ChemXP-NovVE Flake is a flake filled Novolac Vinyl Ester coating which holds up well to aggressive acids, alkalis and organic chemicals.​​​​ Key Features of ChemXP™-NovVE Flake Excellent permeation resistance High Thermal Resistance Ideal for use in tanks, trenches and secondary containment areas exposed to aggressive alkalis and organic chemicals ChemXP-VE Flake is available pre-pigmented in Off-White and Industrial Gray Colors Application For application on concrete substrates, apply ChemXP-VE Primer at 160-200 SF/Gal (2-5 mils) Then, apply a topcoat of ChemXP-NovVE Flake in two coats over the primer, at approximately 50-70 SF/Gal (15-20 mils) each coat Color and Size Options Color options: Off White and Industrial Gray Available sizes: 1 gallon, 4 gallon and 25 gallon units ChemXP-NovVE Flake Off White – 1 gallon unit Part number 9016995 Kit Includes: ChemXP-NovVE Flake Off White Part A – 1 gallon (Qty 1) ChemXP-VE Part B – 2 ounce (Qty 1) ChemXP-NovVE Flake Off White – 4 gallon unit Part number 9016997 Kit Includes: ChemXP-NovVE Flake Off White Part A – 4 gallon (Qty 1) ChemXP-VE Part B – 8 ounce (Qty 1) ChemXP-NovVE Flake Off White – 25 gallon unit Part number 9016999 Kit Includes: ChemXP-NovVE Flake Off White Part A – 25 gallon (Qty ) ChemXP-VE Part B – 0.5 gallon (Qty 1) ChemXP-NovVE Flake Industrial Gray – 1 gallon unit Part number 9016994 Kit Includes: ChemXP-NovVE Flake Industrial Gray Part A – 1 gallon (Qty 1) ChemXP-VE Part B – 2 ounce (Qty 1) ChemXP-NovVE Flake Industrial Gray – 4 gallon unit Part number 9016996 Kit Includes: ChemXP-NovVE Flake Industrial Gray Part A – 4 gallon (Qty 1) ChemXP-VE Part B – 8 ounce (Qty 1) ChemXP-NovVE Flake Industrial Gray – 25 gallon unit Part number 9016998 Kit Includes: ChemXP-NovVE Flake Industrial Gray Part A – 25 gallon (Qty ) ChemXP-VE Part B – 0.5 gallon (Qty 1)

Download Data Sheet

ChemXP™-VE

ChemXP-VE is an excellent, versatile Vinyl Ester coating that is ideal for use in areas exposed to alkalis and acids.​​​​ Key Features of ChemXP™-VE Versatile design Excellent chemical resistance Ideal in secondary containment and areas exposed to highly alkali chemicals ChemXP-VE is available pre-pigmented in Clear, Crimson and Industrial Gray colors Application For application on concrete substrates, apply ChemXP-VE Primer at 160-200 SF/Gal (2-5 mils) Apply a basecoat of ChemXP-VE at 60-72 SF/Gal (20-24 mils) with full broadcast into wet coating Then, apply a topcoat of ChemXP-VE at 72-96 SF/Gal (20-24 mils) Color and Size Options Color options: Clear, Crimson and Industrial Gray Available sizes: 4 gallon and 50 gallon units ChemXP-VE Clear – 4 gallon unit Part number 9017435 Kit Includes: ChemXP-VE Clear Part A – 4 gallon (Qty 1) ChemXP-VE Part B – 8 ounce (Qty 1) ChemXP-VE Clear – 50 gallon unit Part number 9017438 Kit Includes: ChemXP-VE Clear Part A – 50 gallon (Qty 1) ChemXP-VE Part B – 1 gallon (Qty 1) ChemXP-VE Crimson – 4 gallon unit Part number 9017436 Kit Includes: ChemXP-VE Crimson Part A – 4 gallon (Qty 1) ChemXP-VE Part B – 8 ounce (Qty 1) ChemXP-VE Crimson – 50 gallon unit Part number 9017439 Kit Includes: ChemXP-VE Crimson Part A – 50 gallon (Qty 1) ChemXP-VE Primer Part B – 1 gallon (Qty 1) ChemXP-VE Industrial Gray – 4 gallon unit Part number 9017437 Kit Includes: ChemXP-VE Industrial Gray Part A – 4 gallon (Qty 1) ChemXP-VE Part B – 8 ounce (Qty 1) ChemXP-VE Industrial Gray – 50 gallon unit Part number 9017440 Kit Includes: ChemXP-VE Industrial Gray Part A – 50 gallon (Qty 1) ChemXP-VE Primer Part B – 1 gallon (Qty 1)

Download Data Sheet

ChemXP™-VE Flake

ChemXP-VE Flake is a versatile Vinyl Ester coating with an inert flake filling. It can be applied both vertically and horizontally, and is commonly seen in secondary containment and heavy processing areas.​​ Key Features of ChemXP™-VE Flake Inert flake filling allows for excellent permeation resistance Can be applied both vertically and horizontally ChemXP-VE Flake is available pre-pigmented in Off-White and Industrial Gray Colors Application For application on concrete substrates, apply ChemXP-VE Primer at 160-200 SF/Gal (2-5 mils) Then, apply a topcoat of ChemXP-VE Flake in two coats over the primer, at approximately 50-70 SF/Gal (15-20 mils) each coat Color and Size Options Color options: Off White and Industrial Gray Available sizes: 1 gallon, 4 gallon and 25 gallon units ChemXP-VE Flake Off White – 1 gallon unit Part number 9016530 Kit Includes: ChemXP-VE Flake Off White Part A – 1 gallon (Qty 1) ChemXP-VE Part B – 2 ounce (Qty 1) ChemXP-VE Flake Off White – 4 gallon unit Part number 9016532 Kit Includes: ChemXP-VE Off White Part A – 4 gallon (Qty 1) ChemXP-VE Part B – 8 ounce (Qty 1) ChemXP-VE Off White – 25 gallon unit Part number 9016534 Kit Includes: ChemXP-VE Off White Part A – 25 gallon (Qty 1) ChemXP-VE Part B – 0.5 gallon (Qty 1) ChemXP-VE Flake Industrial Gray – 1 gallon unit Part number 9016528 Kit Includes: ChemXP-VE Flake Industrial Gray Part A – 1 gallon (Qty 1) ChemXP-VE Part B – 2 ounce (Qty 1) ChemXP-VE Flake Industrial Gray – 4 gallon unit Part number 9016295 Kit Includes: ChemXP-VE Industrial Gray Part A – 4 gallon (Qty 1) ChemXP-VE Part B – 8 ounce (Qty 1) ChemXP-VE Industrial Gray – 25 gallon unit Part number 9016297 Kit Includes: ChemXP-VE Industrial Gray Part A – 25 gallon (Qty 1) ChemXP-VE Part B – 0.5 gallon (Qty 1)

Download Data Sheet

ChemXP™-VE Primer

ChemXP-VE Primer is a low viscosity, Vinyl Ester resin, used as the prime coat in a variety of Tennant’s ChemXP Vinyl Ester Coatings Systems.​​​ Key Features of ChemXP™-VE Primer Can be used in preparation of a wide variety of ChemXP Systems Excellent adhesion to both concrete and steel substrates Provides excellent resistance to rust and undercutting Application For application on concrete substrates, apply ChemXP-VE Primer at 160-200 SF/Gal (2-5 mils) For application on steel substrates, apply ChemXP-VE Primer at 250-300 SF/Gal (2-5 mils) ChemXP-VE Primer is always applied as a clear resin Color and Size Options ChemXP-VE Primer is clear in color. Not available in other color options. ChemXP-VE Primer – 1 gallon unit Part number 9016500 Kit Includes: ChemXP-VE Primer Part A - 1 gallon (Qty 1) ChemXP-VE Primer Part B – 2 ounce (Qty 1) ChemXP-VE Primer – 4 gallon unit Part number 9016282 Kit Includes: ChemXP-VE Primer Primer Part A – 4 gallon (Qty 1) ChemXP-VE Primer Part B – 8 ounce (Qty 1) ChemXP-VE Primer – 50 gallon unit Part number 901514 Kit Includes: ChemXP-VE Primer Primer Part A – 50 gallon (Qty 1) ChemXP-VE Primer Part B - 1 gallon (Qty 1) ​​​​

Download Data Sheet

Eco-CEP™ White

Tennant’s Eco-CEP White (Colored Epoxy Primer) is used as both a primer and/or build coat which helps provide a more consistent background when using white urethane topcoats Key Features of Eco-CEP White LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings 100% solids epoxy Seals concrete and provides a more consistent background (better hide) for white urethane topcoats Application First prime the floor with Eco-CEP at 321-535 sq ft per gallon (3-5 mils) to minimize outgassing Then apply Eco-CEP at 80-160 sq ft per gallon (10-20 mils) Eco-CEP White is pigmented white Color and Size Options Eco-CEP is pigmented white, Colorants may be added Note: the end result will not be an exact match to the added colorant Call technical support for detailed information Eco-CEP White (with Eco-MPE) - 4 gallon unit Part number 9002628 Kit Includes: Eco-CEP White Part A (Qty 1) Eco-MPE Part B (Qty 1) Eco-CEP White (with Eco-MPE) - 20 gallon unit Part number 9002630 Kit Includes: Eco-CEP White Part A (Qty 3) Eco-MPE Part B (Qty 1)

Download Data Sheet

Eco-Crete™ CB

Tennant’s Eco-Crete CB is a trowel applied, polyurethane concrete, vertical cove base ​ Key Features of Eco-Crete CB Low odor, fast cure installation Excellent corrosion and chemical resistance Application Use Eco-Crete CB (Cove Base) in conjunction with other Eco-Crete flooring products to create a seamless flooring system Apply at 3/16” thick and 4” high cove base Color and Size Options Eco-Crete CB is neutral in color Available in Red, Safety Yellow, Green, Tan, Gray, Dark Gray and Black, as a powder color pack Powder color packs sold separately Add powder color pack to Eco-Crete during the mixing process Eco-CRETE™ Colors Eco-Crete CB – 35 lnft per kit Part number 9014446 Kit Includes: Eco-Crete Part A (0.25 gallon) Eco-Crete Part B (0.25 gallon) Eco-Crete CB Part C (1 bag) Note: This kit requires 1 powder pack when adding color

Download Data Sheet

Eco-Crete™ HF

Tennant’s Eco-Crete HF is a heavy-duty polyurethane concrete that is trowel applied at a nominal 1/4”- 3/8”​​. This product can be used to resurface a concrete slab and as a moisture mitigation product. Key Features of Eco-Crete HF Low odor, fast cure installation Impact and abrasion resistant – suitable for heavy traffic Excellent corrosion and chemical resistance Thermal shock resistant – steam cleanable to withstand temperature variations from -330⁰F to 250⁰F Resistance to moisture vapor transmission Safe Anti-Slip surface- meets ADA recommendations Resistant to fungi growth – ASTM G-21 Application Trowel applied at a nominal 1/4” – 3/8” Color and Size Options Eco-Crete HF is neutral in color Available in Red, Safety Yellow, Green, Tan, Gray, Dark Gray and Black, as a powder color pack Powder color packs sold separately Add powder color pack to Eco-Crete during the mixing process Eco-CRETE™ Colors Eco-Crete HF – 23 sqft kit Part number 9014428 Kit Includes: Eco-Crete Part A (0.5 gallon) Eco-Crete Part B (0.5 gallon) Eco-Crete HF Part C (1 bag) Note: This kit requires 1 powder pack when adding color

Download Data Sheet

Eco-Crete™ IF

Tennant’s Eco-Crete IF is a heavy-duty, iron filled, trowel applied, polyurethane concrete ​​ Key Features of Eco-Crete IF Low odor, fast cure installation Excellent corrosion and chemical resistance Application Apply Eco-Crete IF (Iron Filled) at 3/8” -1/2” Color and Size Options Eco-Crete IF is neutral in color Available in Red, Safety Yellow, Green, Tan, Gray, Dark Gray and Black, as a powder color pack Powder color packs sold separately Add powder color pack to Eco-Crete during the mixing process Eco-CRETE™ Colors Eco-Crete IF – 17 sqft kit Part number 9014446 Kit Includes: Eco-Crete Part A (0.5 gallon) Eco-Crete Part B (0.5 gallon) Eco-Crete IF Part C (1 bag) Note: This kit requires 1 powder pack when adding color

Download Data Sheet

Eco-Crete™ SL

Tennant’s Eco-Crete SL is a self-leveling polyurethane concrete​​ Key Features of Eco-Crete SL Low odor, fast cure installation Impact and abrasion resistant – suitable for heavy traffic Excellent corrosion and chemical resistance Thermal shock resistant – steam cleanable to withstand temperature variations from -330⁰F to 250⁰F Resistance to moisture vapor transmission Safe Anti-Slip surface- meets ADA recommendations Resistant to fungi growth – ASTM G-21 Application Apply Eco-Crete SL at a nominal 1/8” Then broadcast quartz to rejection to achieve a nominal 3/16” thickness Note: Quartz/silica sand sold separately, not part of the Eco-Crete SL kit Color and Size Options Eco-Crete SL is neutral in color Available in Red, Safety Yellow, Green, Tan, Gray, Dark Gray and Black, as a powder color pack Powder color packs sold separately Add powder color pack to Eco-Crete during the mixing process Eco-CRETE™ Colors Eco-Crete SL – 32 sqft kit Part number 9014442 Kit Includes: Eco-Crete Part A (0.5 gallon) Eco-Crete Part B (0.5 gallon) Eco-Crete SL Part C (1 bag/20# bag) Note: This kit requires 1 powder pack when adding color Eco-Crete SL – 320 sqft kit Part number 9014444 Kit Includes: Eco-Crete Part A (5 gallon) Eco-Crete Part B (5 gallon) Eco-Crete SL Part C (10 bags/20# per bag) Note: This kit requires 10 powder packs when adding color Eco-Crete SL – 16,000 sqft kit (Tote) Part number 9014445 Kit Includes: Eco-Crete Part A (250 gallon) Eco-Crete Part B (250 gallon) Eco-Crete SL Part C (500 bags/20# per bag) Note: This kit requires 500 powder packs when adding color Eco-Crete SL-XL – 320 sqft kit Part number 9017942 Kit Includes: Eco-Crete Part A (5 gallon) Eco-Crete Part B (5 gallon) Eco-Crete SL Part C (5 bags/40# per bag) Note: This kit requires 10 powder packs when adding color Eco-Crete SL-XL – 16,000 sqft kit (Tote) Part number 9017943 Kit Includes: Eco-Crete Part A (250 gallon) Eco-Crete Part B (250 gallon) Eco-Crete SL Part C (250 bags/40# per bag) Note: This kit requires 500 powder packs when adding color

Download Data Sheet

Eco-Crete™ TC

Tennant’s Eco-Crete TC is a cementitious urethane topcoat which can also be used as a primer with other Eco-Crete products​​ Key Features of Eco-Crete TC Low odor, fast cure installation Excellent corrosion and chemical resistance Application Apply Eco-Crete TC at 15 mils or 107 sqft/gal For use as a topcoat: Squeegee and roll topcoat over Eco-Crete broadcast systems Eco-Crete SF, Eco-Crete SL For use as a primer under vertical cove base Eco-Crete CB For use as a primer Under Eco-Crete MF Color and Size Options Eco-Crete TC is neutral in color Available in Red, Safety Yellow, Green, Tan, Gray, Dark Gray and Black, as a powder color pack Powder color packs sold separately Add powder color pack to Eco-Crete during the mixing process Eco-CRETE™ Colors Eco-Crete TC – 120 sqft kit Part number 9014450 Kit Includes: Eco-Crete Part A (0.5 gallon) Eco-Crete Part B (0.5 gallon) Eco-Crete TC filler/Part C (1 bag) Note: This kit requires 1 powder pack when adding color

Download Data Sheet

Eco-CRN™

Tennant’s Eco-CRN (Chemical Resistant Novolac) is a high solids novolac-based secondary containment topping/lining that provides superior protection to concrete surfaces subjected to many acids and caustic solutions. Key Features of Eco-CRN LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Provides a highly acid and alkali resistant layer to existing coatings Solvent-free Cleans easily, helping save on detergent, labor and water Application A tight coat primer must be applied prior to the Eco-CRN Eco-CRN may be applied in one coat at 16-20 mils For a smoother finish, apply two 10 mil coats and sand between coats Colorants may be used with Eco-CRN, however refer to the product guide for additional information Color and Size Options Choose a clear coating or select from standard and custom colors Standard Colors Special Colors Eco-CRN – 5 gallon unit Part number 9020757 Kit Includes: Eco-CRN Part A (Qty 1) Eco-CRN Part B (Qty 2)

Download Data Sheet

Eco-DSP™

Eco-DSP™ (Decorative Slurry Primer), is the required primer for Tennant's Decorative Slurry systems. This two-component, fast-cure, high-solids epoxy is to be applied at 8-10 mils. It's important to note that Eco-DSP needs must be pigmented with Tennant's Canada Gray Colorant for use with the Decorative Slurry systems. Size Options Eco-DSP 3 gal kit Kit Number: 9021240 Eco–DSS Part A (Qty 1) Eco–DSS Part B (Qty 1)

Download Data Sheet

Eco-DSS™

Eco-DSS (Decorative Stone Slurry) is a three partt, UV-resistant, epoxy-based, decorative slurry. Used as the slurry layer in the Decorative Stone Slurry™ System, it offers a modern, stone-like appearance and is available in twelve beautiful color options. It's important to note that this product should be applied over Eco-DSP (Decorative Stone Primer) only. Traditional Tennant epoxies will not work. This product can be top coated with Tennant urethanes for a desired finish. Color and Size Options Eco-DSS 3 gal kit Eco–DSS Part A (Qty 1) Eco–DSS Part B (Qty 1) Eco–DSS Part C (Qty 1) Eco-DSS Colors and Part Numbers Eco–DSS Celestial Blue Part Number 9021321 Eco–DSS Coastline Part Number 9021326 Eco–DSS Frosted Pine Part Number 9021330 Eco–DSS Geranium Red Part Number 9021327 Eco–DSS Midnight Sky Part Number 9021324 Eco–DSS Misty Gray Part Number 9021329 Eco–DSS Pacific Blue Part Number 9021328 Eco–DSS Plum Part Number 9021325 Eco–DSS Smokey Walnut Part Number 9021323 Eco–DSS Sunset Sky Part Number 9021332 Eco–DSS Sunshine Part Number 9021331 Eco–DSS Volcanic Ash Part Number 9021322

Download Data Sheet

Eco-DSS™ Cove

Eco-DSS Cove (Decorative Stone Slurry Cove) is a three-part, light-stable, epoxy-based, decorative slurry specifically formulated for cove application. This product is to be used in conjunction with Eco-DSS installations. Color and Size Options Eco-DSS Cove 3 gal kit Eco–DSS Cove Part A (Qty 1) Eco–DSS Cove Part B (Qty 1) Eco–DSS Cove Part C (Qty 1) Eco-DSS Colors and Part Numbers: Eco–DSS Cove Celestial Blue Part Number 9021333 Eco–DSS Cove Coastline Part Number 9021338 Eco–DSS Cove Frosted Pine Part Number 9021342 Eco–DSS Cove Geranium Red Part Number 9021339 Eco–DSS Cove Midnight Sky Part Number 9021336 Eco–DSS Cove Misty Gray Part Number 9021341 Eco–DSS Cove Pacific Blue Part Number 9021340 Eco–DSS Cove Plum Part Number 9021337 Eco–DSS Cove Smokey Walnut Part Number 9021335 Eco–DSS Cove Sunset Sky Part Number 9021344 Eco–DSS Cove Sunshine Part Number 9021343 Eco–DSS Cove Volcanic Ash Part Number 9021334

Download Data Sheet

Eco-ECE™

Tennant’s Eco-ECE is a 100% high solids, solvent free, conductive epoxy that can dissipate a 5000 volt charge in less than 0.1 seconds. ​​ Key Features of Eco-ECE Low odor, can be applied during normal business hours Superior resistance to many harmful chemicals Consistent readings Gloss finish Furnishes conductive properties in accordance with the latest ESD association guidelines and in accordance with EOS and ANSI/ESD specifications Application Apply Eco-ECE at 12 mils thickness, a rate of 133 sq ft per gallon Use either Eco-MPE™, Eco-GPE™ for both the prime coat and build coat Color and Size Options Available in three colors – colors ordered separately Misty Gray – Part number 9015216 Heather Gray – Part number 9015489 Slate Gray – Part number 9015496 Eco-ECE – 3.6 gallon unit Part number 9015214 Kit Includes: Eco-ECE Part A (Qty 2) Eco-ECE Part B (Qty 1) Eco-ECE Part C (Qty 3)

Download Data Sheet

Eco-EJF™

Tennant's Epoxy Joint Filler is a semi-rigid solution for filling contraction and control joints ​​ Key Features of Eco-EJF Makes cleaning easier; helps prevent debris accumulation in joints Provides a flexible seal which can be topcoated with other Tennant products Cures in 6-8 hours Size and Color Options 10 gallon unit Clear/Natural - Part number 9012988 Dovetail Gray - Part number 9012991 Standard Gray – Part number 9012993 Application: Use 10 gallons for 1,500 lineal feet (1/4” x 1/2”) Use 10 gallons for 350 lineal feet (1/2” x 1”)

Download Data Sheet

Eco-FLA™

Eco-FLA is a low odor, rapid cure, aliphatic topcoat coat used in both Tennant Flex Deck System and Eco-Flex Deck System Application Apply Eco-FLA at 80-100 sq ft per gallon (15-20 mils) over a broadcast surface It can be applied in single or multiple coats and is insensitive to moisture Color and Size Options Stocked Colors: Clear, Light Gray, Medium Gray, Dark Gray, Tan and White Parking Deck Colors, Stocked Special order colors available: Brick Red, Tennis Court Green, Dark Tan, Chocolate Minimum of 250 gallon purchase required Parking Deck Colors, Special Order Each Eco-FLA kit contains: Eco-FLA Part A (Qty 1) Eco-FLA Part B (Qty 1) Eco-FLA Clear - 2 gallon unit Part number 9014415 Eco-FLA Light Gray – 4.4 gallon unit Part number 9013614 Eco-FLA Medium Gray – 4.4 gallon uniT Part number 9013709 Eco-FLA Dark Gray – 4.4 gallon unit Part number 9013710 Eco-FLA – Tan – 4.4 gallon unit Part number 9014575 Eco-FLA �� White – 4.4 gallon unit Part number 9014573

Download Data Sheet

Eco-Flex™

Tennant Coatings' Eco-Flex Floor Coating is a solution for durable and flexible epoxy flooring that flexes with floor vibration to reduce floor cracks. Learn more about this flexible epoxy flooring solution here and get it along with other flooring products to complete your facility’s floors. LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Two 20-mil coats serve as a flexible water proofing membrane Ensure long-lasting results; Eco-Flex continues to flex, bend and withstand cracking for the life of the coating Key Features of the Eco-Flex Floor Coating Ideal for use as a primer, broadcast or build coat Withstands damage from dropped tools and other heavy objects, reducing damage to floor Color Options for the Eco-Flex Floor Coating Available in clear, or select from our Standard or Special colorant options

Download Data Sheet

Eco-FLI™

Eco-FLI is used as a flexible intermediate coat and topcoat in the Tennant Flex Deck System and can be used as an aromatic topcoat in the Eco-Flex Deck System​​​ Application Eco-FLI can be used as an intermediate coat or as an aromatic topcoat When used as an intermediate coat, apply Eco-FLI over Tennant FLB at a rate of 80-125 sq ft per gallon (12-20 mils) When applying as a topcoat, apply at 80-100 sq ft per gallon (15-20 mils) Color and Size Options Eco-FLI Light Gray: 5 gallon unit - Part number 9013290 50 gallon unit - Part number 9013991 Eco-FLI Medium Gray: 5 gallon unit - Part number 9012991 50 gallon unit - Part number 9013707 Eco-FLI Dark Gray: 5 gallon unit - Part number 9013706 50 gallon unit - Part number 9013708

Download Data Sheet

Eco-FLM™

Eco-FLM is an epoxy-polyamine primer with unique penetrating characteristics, used in both the Eco-Flex and Tennant Flex Parking Deck Systems on concrete with high moisture readings ​ Application Apply at 10 mils or 150 sq ft/gallon: When vapor rates are 3 to 10 lbs per ASTM F 1869 Up to 85% relative humidity on the per ASTM F 2170 or F 2420 Apply at 13 mils or 125 sq ft/gallon When vapor rates are 10 to 15 lbs per ASTM F 1869 85 to 90% relative humidity on the per ASTM F 2170 or F 2420 Apply at 16 mils or 100 sq ft/gallon When vapor rates are 15 to 25 lbs per ASTM F 1869 90 to 100% relative humidity on the per ASTM F 2170 or F 2420 Color and Size Options Available in clear only Eco-FLM - 3 gallon unit Part number 9014196 Kit contains: Eco-FLM Part A (Qty 1) Eco-FLM Part B (Qty 1)

Download Data Sheet

Eco-FLP-E™

Eco-FLP-E (Flexible Primer Epoxy) is used in both Eco-Flex Deck System and Tennant Flex Deck System ​ Application Prime bare concrete coatings with Eco-FLP-E at 320-535 sq ft per gallon (3-5 mils) to promote adhesion of subsequent coatings Size Options Eco-FLP-E – 10 gallon unit Part number 9013617 Kit Contains: Eco-FLP-E Part A (Qty 1) Eco-FLP-E Part B (Qty 1) ​

Download Data Sheet

Eco-GPE™

Tennant’s Eco-GPE (General Purpose Epoxy) is an economical, low-odor, 100% solids epoxy containing recycled materials, ideally used as a primer and/or build coat​​ Key Features of Eco-GPE LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings 100% solids epoxy Low odor formula works perfectly around odor-sensitive stock and environments Application Apply Eco-GPE as a primer at 320-535 sq ft per gallon (3-5 mils) to minimize outgassing Then apply Eco-GPE at 53-535 sq ft per gallon (3-30 mils) Colorants can be used with Eco-GPE, however Eco-GPE may not give complete hide if applied at low millage ​​ Color and Size Options Choose a clear coating or select from standard and custom colors Eco-GPE – 12 gallon unit Part number 90012538 Kit Includes: Eco-GPE Part A (Qty 2) Eco-GPE Part B (Qty 1)

Download Data Sheet

Eco-Hard-N-Seal™

Tennant’s Eco-Hard-N Seal (Concrete Hardener and Sealer) reduces dusting produced by concrete floors, protecting your environment and assets​​ Key Features of Eco-Hard-N-Seal LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Solvent-Free Low odor Application Apply at 300 sq ft per gallon Color and Size Options Available in Clear only, colorants cannot be added Eco-Hard-N-Seal - 5 gallon unit Part number 08695-5 Kit Includes: Eco-Hard-N-Seal - 55 gallon unit Part number 08695-55 Kit Includes: Eco-Hard-N-Seal (Qty 1)

Download Data Sheet

Eco-HPS® 100

Tennant’s Eco-HPS 100 (High Performance System) is a low odor/low VOC, chemical resistant, aliphatic, high performance topcoat with a gloss finish, helping keep floors both beautiful and functionional.​ Key Features of Eco-HPS 100 LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Low VOC – 6 grams per liter Gloss sheen that lasts twice as long as standard urethanes; up to four times as long as standard epoxies Offers excellent resistance to chemicals 100% aliphatic or UV-stable formula which helps keep floors from yellowing over time Application Apply Eco-HPS 100 at 500 sq ft per gallon for one coat On bare concrete, an epoxy is required Choose from: Eco-Shield™, Eco-CEP™, Eco-MPE™, Eco-RCE™ or Eco-GPE™ Color and Size Options Choose a clear coating or select from standard and custom colors Standard Colors, Stocked Standard Colors, Limited Stock Eco-HPS 100 – .94 gallon unit Part number 9002633 Kit Includes: Eco-HPS 100 Part A (Qty 1) Eco-HPS 100 Part B (Qty 1) Eco-HPS 100 – 4.7 gallon unit Part number 9002634 Kit Includes: Eco-HPS 100 Part A (Qty 1) Eco-HPS 100 Part B (Qty 1)

Download Data Sheet

Eco-HTS™ 100

Tennant’s Eco-HTS 100 (High Traffic System) is a low odor/low VOC, durable, chemical resistant, aliphatic, satin urethane topcoat for high volume and heavy load traffic areas ​​​​​​​​ Key Features of Eco-HTS LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Low VOC – 5 grams per liter Satin sheen that lasts twice as long as standard urethanes; up to four times as long as standard epoxies Offers excellent resistance to chemicals Slight texture creates a safer workplace by providing greater traction which helps reduce risk of slip and fall accidents 100% aliphatic or UV-stable formula which helps keep floors from yellowing over time Application Apply Eco-HTS 100 at 500 sq ft per gallon for one coat On Bare concrete, an epoxy is required Choose from: Eco-Shield™, Eco-CEP™, Eco-MPE™, Eco-RCE™ or Eco-GPE™ Eco-HTS 100 can be applied direct to concrete When using the Easy Prep™ 100 grit Concrete Tools to prepare the surface Add 413 SF Bonding Additive at a rate of 4 oz per 5.5 gallon unit (8 oz if using colorant) Refer to System Guide for detailed instructions Color and Size Options Choose a clear coating or select from standard and custom colors Standard Colors, Stocked Standard Colors, Limited Stock Eco-HTS 100 – 1.09 gallon unit Part number 9002617 Kit Includes: Eco-HTS 100 Part A (Qty 1) Eco-HTS 100 Part B (Qty 1) Eco-HTS 100 Part C (Qty 1) Eco-HTS 100 – 5.5 gallon unit Part number 90026921 Kit Includes: Eco-HTS 100 Part A (Qty 1) Eco-HTS 100 Part B (Qty 1) Eco-HTS 100 Part C (Qty 1

Download Data Sheet

Eco-MPE™

Tennant’s Eco-MPE (Multi-Purpose Epoxy) is a low-odor, 100% solids epoxy that self-levels for easy application. Eco-MPE is ideal for use as a primer, broadcast or build coat. Key Features of Eco-MPE LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings 100% solids epoxy Low odor formula works perfectly around odor-sensitive stock and environments Application First prime the floor with Eco-MPE at 320-535 sq ft per gallon (3-5 mils) to minimize outgassing Then, apply Eco-MPE at 50-535 sq ft per gallon (3-32 mils) Colorants can be used with Eco-MPE, however Eco-MPE may not give complete hide if applied at low millage Color and Size Options Choose a clear coating or select from standard and custom colors Standard Colors, Stocked Standard Colors, Limited Stock Eco-MPE – 3 gallon unit Part number 370503 Kit Includes: Eco-MPE Part A (Qty 1) Eco-MPE Part B (Qty 1) Eco-MPE – 15 gallon unit Part number 370650 Kit Includes: Eco-MPE Part A (Qty 2) Eco-MPE Part B (Qty 1) Mix Ratio: 2 gallons Part A to 1 gallon Part B​​​​​​​​​​​​

Download Data Sheet

Eco-MVR™ 100

Tennant’s Eco-MVR™ 100 next generation (Moisture Vapor Reducer) protects your investment from moisture problems, while ensuring quick operation start up, reduced costs, downtime and waste with a single coat application. Key Features of Eco-MVR 100 LEED® v4 – Indoor Air Quality credits available. - Meets requirements per CDPH-CA Section 01350 Standard method for the Testing and Evaluation of Volatile Organic Chemical Emissions from Indoor Sources Using Environmental chambers Version 1.2. Control moisture under protective or decorative floor coatings for floors exhibiting moisture issues Accelerate new construction projects by coating new concrete floors earlier Save on labor, downtime and waste with a single coat application Application 12 mil system: On concrete that is at least 28 days old: Withstands concrete moisture rates up to 85% in-situ relative humidity per ASTM F2170 and up to 15 lbs per 1,000 ft² (92.9m²) in 24 hours per ASTM F1869 17 mil system: On concrete that is at least 28 days old: Withstands concrete moisture rates up to 99% in-situ relative humidity per ASTM F2170 and up to 24 lbs per 1,000 ft² (92.9m²) in 24 hours per ASTM F1869 22 mil system: On fresh (green) concrete that is cured enough to be properly prepped: Withstands concrete moisture rates up to 99% in-situ relative humidity per ASTM F2170 and up to 24 lbs per 1,000 ft² (92.9m²) in 24 hours per ASTM F1869 Color and Size Options Available in clear only Eco-MVR 100 – 2.9 gallon unit Part number 9020581 Kit Includes: Eco-MVR 100 Part A (Qty 1) Eco-MVR 100 Part B (Qty 1) Eco-MVR 100 – 5.5 gallon unit Part number 9018717 Kit Includes: Eco-MVR 100 Part A (Qty 1) Eco-MVR 100 Part B (Qty 1) Eco-MVR 100 – 146 gallon drum unit Part number 9020671 Kit Includes: Eco-MVR 100 Part A (Qty 2) Eco-MVR 100 Part B (Qty 1) Eco-MVR 100 – 746 gallon tote unit Part number 9020674 Kit Includes: Eco-MVR 100 Part A (Qty 2) Eco-MVR 100 Part B (Qty 1)

Download Data Sheet

Eco-PJF™

Polyurea Joint Filler Key Features of Eco-PJF Make cleaning easier; prevent debris accumulation in joints Provides a flexible seal which can be topcoated with other Tennant products Quick cure time 15-30 minutes Size and Color Options 600 ml Cartridge/ 12 count: Clear/Natural - Part number 9012985 Dovetail Gray - Part number 9012986 Standard Gray – Part number 9012987 Cartridges require an application gun Eco-PJF™ Application Gun 10 Gallon units: Clear/Natural - Part number 9012978 Dovetail Gray - Part number 9012981 Standard Gray - Part number 9012983

Download Data Sheet

Eco-PJF™ Application Gun

Alibion 300 ml x 300 ml Eco-PJF™ application gun When ordring Eco-PJF™ an application gun is required to apply the joint filler ​Eco-PJF™ Application Gun: Part Number 9012995 Eco-PJF™ Application Gun

Eco-PT™ 250

Tennant’s Eco-PT 250 is a Power-Trowel Epoxy Overlay Resurfacer that restores eroded floors. ​​​​​ Key Features of Eco-PT 250 LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Repairs concrete floors, preventing costly concrete replacement Higher compressive strength than concrete Expertly restores large spaces to withstand daily forklift traffic Application Primer + 1/4” Power Trowel Overlay: Use 1 kit of 900 sq ft at 1/4” Use 1 kit per 1,200 sq ft at 3/16” The neutral kit contains 2 units of Eco-MPE™ as primer: Extra primer required for 3/16” application Color and Size Options Choose a neutral or select from standard and custom colors Eco-PT 250 – 900 sq ft kit Part number 60690 Kit Includes: Eco-MPE Part A (5 gal) (Qty 4) Eco-MPE Part B (5 gal) (Qty 2) Eco-PT 250 Part C (Qty 49) Eco-PT 250 – 11,700 sq ft kit Part number 60690BLK Kit Includes: Eco-MPE Part A (55 gal) (Qty 4) Eco-MPE Part B (55 gal) (Qty 2) Eco-PT 250 Part C (Qty 624) Eco-MPE Part A (5 gal) (Qty 6) Eco-MPE Part B (5 gal) (Qty 3)

Download Data Sheet

Eco-PT™ Topcoat

Tennant’s Eco-PT Topcoat is an epoxy topcoat used over Tennant’s Eco-PT™ 250 (Power Trowel) to seal the mortar​​ Key Features of Eco-PT Topcoat LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Application Apply Eco-PT Topcoat at 200-267 sq ft per gallon (6-8 mils) Color and Size Options Choose a neutral or select from standard and custom colors Eco-PT Topcoat – 3 gallon Part number 370516 Kit Includes: Eco-PT Topcoat Part A (Qty 1) Eco-MPE Part B (Qty 1)

Download Data Sheet

Eco-RCE™

Tennant’s Eco-RCE (Rapid Cure Epoxy) is a low odor, 100% solids primer used for quicker installation time Key Features of Eco-RCE LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings 100% solids epoxy Low odor formula works perfectly around odor-sensitive stock and environments Reduce downtime Application For Thickness >8 mils, first prime the floor with Eco-RCE at 320-535 sq ft per gallon (3-5 mils) to minimize outgassing Then apply Eco-RCE at 50-535 sq ft per gallon (3-30 mils)) Color and Size Options Choose a clear coating or select from standard and custom colors Eco-RCE – 15 gallon unit Part number 378107 Kit Includes: Eco-RCE Part A (Qty 2) Eco-RCE Part B (Qty 1) Color and Size Options The difference between Eco-RCE and Eco-RCE/M are their cure times Eco-RCE: 4 hours at 70⁰F Eco-RCE/M: 8 hours at 70⁰F

Download Data Sheet

Eco-RCE™/M

Tennant’s Eco-RCE/M (Rapid Cure Epoxy) is a low odor, 100% solids primer used for quicker installation time​​​​ Key Features of Eco-RCE/M LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings 100% solids epoxy Low odor formula can be used around odor-sensitive stock and environments Reduce downtime Application For Thickness >8 mils, first prime the floor with Eco-RCE/M at 320-535 sq ft per gallon (3-5 mils) to minimize outgassing Then apply Eco-RCE/M at 50-535 sq ft per gallon (3-30 mils) Color and Size Options Choose a clear coating or select from standard and custom colors Eco-RCE/M – 15 gallon unit Part number 9004585 Kit Includes: Eco-RCE Part A (Qty 2) Eco-MPE Part B (Qty 1) Cure Times The difference between Eco-RCE, Eco-RCE/F and Eco-RCE/M are their cure times s Eco-RCE: 4 hours at 70⁰F Eco-RCE/F: 6 hours at 70⁰F Eco-RCE/M: 8 hours at 70⁰F

Download Data Sheet

Eco-SCT™

Tennant’s Eco-SCT is used as a Static Control Topcoat to help protect against potentially harmful static electricity in industrial and manufacturing settings​​ Key Features of Eco-SCT Controls electrostatic discharge (ESD) Withstands wear better than ESD carpeting or tile LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Gloss Finish Application Apply Eco-SCT at 80-107 sq ft per gallon (15-20 mils) over 3-5 mils of an insulative epoxy Use either Eco-MPE™ or Eco-GPE™ as the insulative epoxy Tennant Colorants must be added to Eco-SCT Color and Size Options Colorant required, cannot be used as clear/neutral Eco-SCT – 3.05 gallon unit Part number 9014868 Kit Includes: Eco-SCT Part A (Qty 1) Eco-SCT Part B (Qty 1) Eco-SCT Part C (Qty 1)

Download Data Sheet

Eco-SDS™ Satin

Tennant’s Eco-SDS Satin is a durable, chemical-resistant, static dissipative urethane coating with a satin finish, which helps reduce the effects of static electricity ​​​ Key Features of Eco-SDS Satin Electrostatic discharge control – Meets ANSI/ESD STM 7.1-2013 for resistance readings 1x10⁵ ohms to <1x10⁹ ohms LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Lasts as long as standard urethanes, up to two times as long as standard epoxies Satin Sheen which maintains a fresh look even in high traffic areas that reduces the effects of static electricity Application On bare concrete, an epoxy primer is required Use Eco-Shield™, Eco-MPE™, Eco-RCE™, Eco-GPE™ Apply Eco-SDS Satin at 600 sq ft per gallon Color and Size Options Not available in clear/neutral, must add colorants to product Choose from standard and custom colors Eco-SDS Satin – 1.09 gallon unit Part number 9014335 Kit Includes: Eco-SDS Satin Part A (Qty 1) Eco-SDS Satin Part B (Qty 1) Eco-SDS Satin Part C (Qty 1)

Download Data Sheet

Eco-TCP™

Tennant’s Eco-TCP (Thick Coat Polyaspartic) is a fast curing and light stable topcoat used in Tennant’s decorative flake and quartz systems and can be used over VCT tile as well ​​ Key Features of Eco-TCP LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Low odor Fast curing allows for foot traffic in hours Aliphatic or UV-stable formula which helps keep floors from yellowing over time Application Apply Eco-TCP at 107 sq ft per gallon (15 mills) as the grout coat over unsealed full broadcast quartz and/or flake. For a smoother texture, an additional 8 mil coat can be applied Apply Eco-TCP at 200-267 sq ft per gallon (maximum) over a sealed surface, random flake surface, or as a topcoat Color and Size Options Choose a clear coating or select from standard and custom colors Eco-TCP – 4 gallon unit Part number 9012532 Kit Includes: Eco-TCP Part A (Qty 1) Eco-TCP Part B (Qty 1)

Download Data Sheet

Eco-TCU™

Tennant’s Eco-TCU (Thick Coat Urethane) is a light stable topcoat used in Tennant’s decorative flake and quartz systems Key Features of Eco-TCU LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Low odor Fast curing allows for foot traffic in hours Aliphatic or UV-stable formula which helps keep floors from yellowing over time Application Apply Eco-TCU at 107 sq ft per gallon (15 mills) as the grout coat over unsealed full broadcast quartz and/or flake. For a smoother texture, an additional 8 mil coat can be applied Apply Eco-TCP at 200-267 sq ft per gallon (maximum) over a sealed surface, random flake surface, or as a topcoat Color and Size Options Choose a clear coating or select from standard and custom colors Eco-TCU – 4 gallon unit Part number 901270 Kit Includes: Eco-TCU Part A (Qty 1) Eco-TCU Part B (Qty 1)

Download Data Sheet

Eco-URE™

Tennant’s Eco-URE (UV Resistant Epoxy) is typically used as a build coat or grout coat in decorative flooring systems, to help protect against yellowing ​​​​ Key Features of Eco-URE LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Low odor formula Exceptional UV resistance Easy to clean, helping save on detergent, labor and water costs Application Apply Eco-URE at 107-500 sq ft per gallon (3-15 mils) If applied thicker than 15 mils per coat, the UV resistance of the product will be reduced Color and Size Options Choose a clear coating or select from standard and custom colors Eco-URE - 15 gallon unit Part number 9003322 Kit Includes: Eco-URE Part A (Qty 2) Eco-URE Part B (Qty 1)

Download Data Sheet

Eco-UVS™

The Proven Solution™ for those who cannot shutdown to coat, cure floors instantly with Tennant’s UV cured urethane​​​​ Key Features of Eco-UVS Clear, satin finish Cures instantly with UV light, using the SunFlash™ Application Apply Eco-UVS at 500 sq ft per gallon (3.2 mils) Must be cured with SunFlash™ machine Colorants cannot be used in Eco-UVS Color and Size Options Available in clear only Eco-UVS – 1 gallon unit Part number 9000435 Kit Includes: Eco-UVS Part A (Qty 1) Eco-UVS Part B (Qty 1) Eco-UVS Part C (Qty 1) SunFlash™ UV Light Machine Part number 381278 For use with Eco-UVS ONLY Cure Eco-UVS at 3-4 seconds/foot

Download Data Sheet

Jiffy® Mixer Blades

All purpose mixing blade​​​ The Jiffy Mixer blade is an easy to use, heavy duty mixing blade, used for both industrial and commercial mixing Size Options 1 gallon size - Part Number 08643-1 5 gallon size - Part Number 08643-5

ReVue™-CRM

Tennant’s ReVue™-CRM is a high performance Concrete Repair Mortar that is used to repair damaged concrete and can be used to slope floors. It can also withstand extreme temperatures and is ideal for fast track projects in high traffic areas, including streets and truck docks. ​​​​​​ Key Features of ReVue-CRM Fast curing – open to standard traffic within 4 hours of application Can be applied as thin as ¼” No VOC (0 g/L) One component Resistant to freeze and thaw conditions Interior and exterior applications LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings Application Thickness: ¼” to 4” (6.35 mm to 101.6 mm) Coverage rate per bag mix: 9.6 ft² @ ½” (0.89 m² @ 12.7 mm) Part Number 9013209 (Pallet of qty 56 bags)

ReVue™-DP

ReVue-DP pads are diamond impregnated pads, with high diamond concentrations throughout the pad, resulting in excellent burnishing capabilities, long service times and consistent high quality results. ReVue-DP Options: ReVue-DP11 (11” pads): ReVue-DP11800 800 grit pads/Qty 1 Part number 9018802 ReVue-DP111500 1500 grit pads/Qty 1 Part number 9018801 ReVue-DP113000 3000 grit pads/Qty 1 Part number 9018803 ReVue-DP20 (20” pads): ReVue-DP20800 800 grit pads/Qty 1 Part number 9018995 ReVue-DP201500 1500 grit pads/Qty 1 Part number 9018996 ReVue-DP203000 3000 grit pads/Qty 1 Part number 9018997 ReVue-DP27 (27” pads): ReVue-DP27800 800 grit pads/Qty 1 Part number 9016949 ReVue-DP271500 1500 grit pads/Qty 1 Part number 9016905 ReVue-DP273000 3000 grit pads/Qty 1 Part number 9016950

ReVue™-HYB

ReVue-HYB is a Hybrid Semi-Metal Bonded Tool with high diamond concentration to make quick work of tough jobs while producing consistent results. ​​​ ReVue-HYB Options: ReVue-HYB30 30 grit: 3", 76mm tooling/Qty 3 Part number 9016938 ReVue-HYB50 50 grit: 3", 76mm tooling/Qty 3 Part number 9016939 ReVue-HYB100 100 grit: 3", 76mm tooling/Qty 3 Part number 9016940 ReVue-HYB200 200 grit: 3", 76mm tooling/Qty 3 Part number 9016941 ReVue-HYB400 400 grit: 3", 76mm tooling/Qty 3 Part number 9016904

ReVue™-HydroCut

ReVue-HydroCut is a concrete cutting product that enables rapid concrete stock removal with immediate refinement in just one step. This product helps reduce labor costs while eliminating the need for scratch marks created during traditional polishing processes. ​​ Key Features of ReVue-HydroCut Concrete cutting product Enables quick, efficient concrete removal on first step Achieve immediate, concrete refinement Helps reduce labor and overall project costs Size Options ReVue-HydroCut: 1 gallon pail Part number 9016922 5 gallon pail Part number 9016900 55 gallon drum Part number 9016923 275 gallon tote Part number 9016924

Download Data Sheet

ReVue™-HydroDense

ReVue-HydroDense is a concrete densifying product based on colloidal silica chemistry. It effectively closes microscopic concrete capillaries, helping create an abrasion resistant substrate that reduces concrete dusting.​ ​​Key Features of ReVue-HydroDense Low Odor Solvent-Free Collidial Silica Technology Virtually eliminates "White Bloom" Helps reduce clean up and maintenance costs Size Options ReVue-HydroDense: 1 gallon pail Part number 9016929 5 gallon pail Part number 9016901 55 gallon drum Part number 9016930 275 gallon tote Part number 9016931

Download Data Sheet

ReVue™-HydroGard

ReVue-HydroGard is a high-gloss penetrating concrete sealer, providing densifying characteristics while helping protect the surface from scratching, scuffing and staining. ​​ Key Features of ReVue-HydroGard Provides stain resistance High gloss finish Incorporates densifying characteristics Size Options ReVue-HydroGard: 1 gallon pail Part number 9016932 5 gallon pail Part number 9016902 55 gallon drum Part number 9016933 275 gallon tote Part number 9016934

Download Data Sheet

ReVue™-HydroRock

ReVue-HydroRock is a slurry solidifying product that allows for easy cleanup of the slurry material produced during the wet polishing process. With excellent absorbency and retention properties, and a fast acting formula, ReVue-HydroRock allows installers to maximizing their productivity without missing a step in their polishing process. ​​​ ​​ Size Options ReVue-HydroRock - 45# Box Part number 9018770

Download Data Sheet

ReVue™-PHN

ReVue™-PHN is used during the dry polishing phase after all wet grinding and concrete removal phases are complete. These industrial grade tools use phenolic resin bonds to provide excellent clarity with minimal resin transfer to the concrete, resulting in impressively high DOI (Distinctness of Image) readings. ​​ ReVue-PHN Options: ReVue-PHN400 400 grit: 3", 76mm tooling/Qty 3 Part number 9016942 ReVue-PHN800 800 grit: 3", 76mm tooling/Qty 3 Part number 9016943 ReVue-PHN1500 1500 grit: 3", 76mm tooling/Qty 3 Part number 9016944 ReVue-PHN3000 3000 grit: 3", 76mm tooling/Qty 3 Part number 3000 grit: 3", 76mm tooling/Qty 9

ReVue™-SLM

Tennant’s ReVue-SLM is a cement based Self-Leveling Mortar (fortified with a latex polymer) that excels at leveling large areas. It works with a variety of surfaces such as concrete, well-bonded abraded mortars and ceramic tiles. Key Features of ReVue™-SLM Economical solution to a smooth level floor No VOC (0 g/L) Long working time- approximately flowable 30 minutes Pours up to 1½” thick LEED – Credits available – Indoor Environmental Quality – 4.2 Low Emitting Materials, Paint & Coatings ​ Application Thickness: 1/8” to 1½” (3.18 mm to 38 mm) Coverage rate per bag mix: 47 ft² @ 1/8” (4.27 m² @ 3.18 mm) Yield per 50 lb. bag (22.7 kg bag): 0.47 cu ft. at 1/8” thickness ​ Part Number 9015657 (Pallet of qty 50 bags)

Download Data Sheet

ReVue™-SP

ReVue-SP is a sintered press metal, diamond polishing tool that is used for heavy work on rough floors. These tools are typically used during the first grinding step of the ReVue™ Hydro polishing process ReVue-SP Options: ReVue-SP100 100 grit: 3", 76mm tooling/Qty 3 Part number 9016937 ReVue-SP400 400 grit: 3" 76mm tooling/Qty 3 Part number 9016909

ReVue™-TSR

ReVue-TSR are ten segment, metal bonded diamond tools. These tools provide immediate refinement on poor concrete, producing consistent heavy Salt N’ Pepper results.​ ReVue-TSR Options: ReVue-TSR30 30 grit: 3", 76mm tooling/Qty 3 Part number 9016935 ReVue-TSR100 100 grit: 3", 76mm tooling/Qty 3 Part number 9016936 Consult Tennant Technical Support to ensure proper compatibility with grinding machine.

Tennant CRU

Tennant CRU (Chemical Resistant Urethane) is a chemical resistant, aliphatic topcoat, helping keep floors both beautiful and functional​​​​​ Key Features of Tennant CRU Gloss sheen that lasts twice as long as standard urethanes; up to four times as long as standard epoxies Offers excellent resistance to chemicals Application On bare concrete, an epoxy primer is required Choose from: Eco-Shield™, Eco-CEP™, Eco-MPE™, Eco-RCE™ or Eco-GPE™ Apply Tennant CRU at 500 sq ft per gallon Color and Size Options Choose a clear coating or select from standard and custom colors Tennant CRU - 2.54 gallon unit Part number 9013208 Kit Includes: Tennant CRU Part A (Qty 1) Tennant CRU Part B (Qty 1)

Download Data Sheet

Tennant MMA Accelerator

Tennant MMA Accelerator is added to Tennant MMA Primer, Tennant MMA Body Coat and Tennant MMA Cold Body Coat and Tennant MMA Topcoat to accelerate the cure time of the product​​ Application Add 1-8 oz (30 to 237 mL) per mixed unit depending on temperature See individual product bulletins Size Options Tennant MMA Accelerator – 1 gallon unit Part number 9006665

Download Data Sheet

Tennant MMA Body Coat

Tennant MMA Body Coat is used in environments where temperatures are higher than 32⁰F. It is mixed with Tennant MMA Body Filler to create a slurry.​​​ Application First prime the floor with Tennant MMA Primer at 100 sq ft per gallon over bare concrete Then apply Tennant MMA Body Coat at 20 sq ft per gallon @ 1/8” and 16 sq ft per gallon @ 3/16 Must use Tennant MMA Catalyst See component section for usage, in the PDF files listed below Use Tennant MMA Accelerator or Retarder See component section for usage, in the PDF files listed below Add 40 lbs of Tennant MMA Filler per 2 gallon mix See component section for usage, in the PDF files listed below Color and Size Options Colorants can be added, choose from standard and custom colorants Consult Tennant Technical support for Tennant MMA Body Coat – 5 gallon unit Part number 9006648 Tennant MMA Body Coat - 55 gallon unit Part number 9006649

Download Data Sheet

Tennant MMA Body Coat Filler

Tennant MMA Body Coat Filler is added to Tennant MMA Body Coat and Tennant MMA Cold Body Coat to create a slurry​​ Application Add 40 lbs (22kg) per mixed unit of Tennant MMA Body Coat and Tennant MMA Cold body coat See individual product bulletins Size Options Tennant MMA Body Coat Filler – 40 pound bag Part number 9006653

Download Data Sheet

Tennant MMA Bonding Additive

Tennant MMA Bonding Additive is added to Tennant MMA Primer, creating solid bond between the concrete and the Tennant MMA Primer ​​​​​ Application Add 1 Quart (946.4 mL) of Tennant MMA Bonding Additive to 1 gallons of Tennant MMA Primer resin Size Options Clear in color Tennant MMA Bonding Additive – 1 gallon unit Part number 9006644 Tennant MMA Bonding Additive - 5 gallon unit Part number 9006645

Download Data Sheet

Tennant MMA Catalyst

Tennant MMA Catalyst is a curing agent used with Tennant MMA Primer, Tennant MMA Body Coat, Tennant MMA Cold Body Coat and Tennant MMA Topcoat​​​

Download Data Sheet

Tennant MMA Cold Body Coat

Tennant MMA Body Coat is used in environments where temperatures are below 32⁰F. It is mixed with Tennant MMA Body Filler to create a slurry.​​​ Application First prime the floor with Tennant MMA Primer at 100 sq ft per gallon over bare concrete Then apply Tennant MMA Body Coat at 20 sq ft per gallon @ 1/8” and 16 sq ft per gallon @ 3/16 Must use Tennant MMA Catalyst See component section for usage, in the PDF files listed below Use Tennant MMA Accelerator or Retarder See component section for usage, in the PDF files listed below Add 40 lbs of Tennant MMA Filler per 2 gallon mix See component section for usage, in the PDF files listed below Color and Size Options Colorants can be added, choose from standard and custom colorants Tennant MMA Cold Body Coat – 5 gallon unit Part number 9006651 Tennant MMA Cold Body Coat - 55 gallon unit Part number 9006652

Download Data Sheet

Tennant MMA Monomer

Tennant MMA Monomer is a solvent cleaner used to clean existing Tennant MMA Floors, prior to installing a new coat of Tennant MMA. It can also be used to clean tools. Application Solvent Cleaner This product is used to clean Tennant MMA floors, do not use to clean bare concrete Size Options Tennant MMA Monomer – 5 gallon unit Part number 9006664

Download Data Sheet

Tennant MMA Primer

Tennant MMA (Methyl Methacrylate) Primer is used as a first coat when applying a Tennant MMA system​​​ Key Features of Tennant MMA Primer Extremely quick cure times (around 1 hour) UV resistant, light stable Application First prime the floor with Tennant MMA primer at 100 sq ft per gallon over bare concrete Must use Tennant MMA Bonding Additive Must use Tennant MMA Catalyst See component section for usage, in the PDF files listed below Use Tennant MMA Accelerator or Retarder See component section for usage, in the PDF files listed below Color and Size Options Choose from clear or select from standard and custom colors Tennant MMA Primer – 5 gallon unit Part number 9006642 Tennant MMA Primer – 55 gallon unit Part number 9006643

Download Data Sheet

Tennant MMA Topcoat

Tennant MMA Topcoat is used as the final coat in a Tennant MMA system.​​ Application First prime the floor with Tennant MMA Primer at 100 sq ft per gallon over bare concrete Then apply Tennant MMA Body Coat at 20 sq ft per gallon @ 1/8” and 16 sq ft per gallon @ 3/16 Then apply Tennant MMA Topcoat at 100 sq ft per gallon To achieve less texture and increase cleanability, apply a second topcoat at 100 sq ft per gallon Must use Tennant MMA Catalyst See component section for usage, in the PDF files listed below Use Tennant MMA Accelerator or Retarder See component section for usage, in the PDF files listed below Add 40 lbs of Tennant MMA Filler per 2 gallon mix See component section for usage, in the PDF files listed below Color and Size Options Colorants can be added, choose from standard and custom colorants Tennant MMA Topcoat – 5 gallon unit Part number 9006660 Tennant MMA Topcoat - 55 gallon unit Part number 9006661

Download Data Sheet

Tennant MMA Retarder

Tennant MMA Retarder is added to Tennant MMA Primer, Tennant MMA Body Coat and Tennant MMA Topcoat to decelerate the cure time of the product. (Not used with Tennant MMA Cold Body Coat) Application Add 1-8 oz (30 to 237 mL) per mixed unit depending on temperature See individual product bulletins Size Options Tennant MMA Retarder – 1 gallon unit Part number 9006667

Download Data Sheet

WearGuard™-240 Gloss

Tennant’s WearGuard-240 Gloss is an economical, cost efficient, urethane topcoat with a gloss finish. Key Features of WearGuard-240 Gloss Extremely Durable – Lasts up to two times longer than standard epoxies Meets OSHA requirements for slip resistance Economical – A cost efficient, durable urethane for protecting and maintaining concrete floors Meets VOC regulations – Under 250 g/L VOC Gloss finish to help improve the look of your floor and may help with light reflectivity Application Apply WearGuard-240 Gloss at 400 sq ft per gallon (4 mils) Color and Size Options Choose a clear coating or select from standard and custom colors Standard Colors, Stocked Standard Colors, Limited Stock WearGuard-240 Gloss - 3.98 gallon unit Part number 9015686 Kit Includes: WearGuard-240 Gloss Part A (Qty 1) WearGuard-240 Gloss – 50 gallon unit Part number 9016109 Kit Includes: WearGuard-240 Gloss Part A (Qty 1)

Download Data Sheet

WearGuard™-240 Satin

Tennant’s WearGuard™-240 satin is an economical, cost efficient, urethane topcoat with a satin texture. ​​ Key Features of WearGuard-240 Satin Extremely Durable – Lasts up to two times longer than standard epoxies Meets OSHA requirements for slip resistance Economical – A cost efficient, durable urethane for protecting and maintaining concrete floors Meets VOC regulations – Under 250 g/L VOC Satin finish for slight texture and wear resistance Application Apply WearGuard-240 Satin at 400 sq ft per gallon (4 mils) Color and Size Options Choose a clear coating or select from standard and custom colors Standard Colors, Stocked Standard Colors, Limited Stock WearGuard-240 Satin - 1 gallon unit Part number 9015682 Kit Includes: WearGuard-240 Satin Part A (Qty 1) WearGuard-240 Satin Part B (Qty 1) WearGuard-240 Satin – 5 gallon unit Part number 9015685 Kit Includes: WearGuard-240 Satin Part A (Qty 1) WearGuard-240 Satin Part B (Qty 1)

Download Data Sheet

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods