ResinTech UV Resistant TRANSPARENT UNIVERSAL EPOXY 100% SOLIDS ( TUE ) 15L - 4 Gals
ResinTech TUE (Transparent Universal Epoxy) Specification
Product Overview:
ResinTech TUE (Transparent Universal Epoxy) is a premium 100% solids, t...
Metallic Epoxy Pigments
Metallic Epoxy Pigments
metallic collection
🔹AppleGreen🔸AztecGold🔹BlackPearl🔸Bronze-Brown🔹ChestnutBrown🔸Cofee🔹SilverGrey🔸SilverPearl
🔹Lus...
Tremco Vulkem 350NF Base Coat
Single-Component, Low Odour, Low VOC, Urethane Membrane
Vulkem® 350NF Base Coat is a single-component, low odor, low VOC, urethane membrane that ...
Aliphatic Top Coat Urethane (TCU) Resintech ( Satin / Matte Finish )
TCU is a two-component abrasion, chemical and stain resistant, UV stable aliphatic polyester polyurethane finish coat. It is available in cle...
Tremco Vulkem 950NF Top Coat
Vulkem 950NF Top Coat is a two-component polyurethane that is applied after the Vulkem 350NF base coat has cured. Interlaminary adhesion to Vulkem...
Vulkem 346 Top Coat Aliphatic one-component polyurethane
Vulkem 346 Top Coat is an aliphatic one-component polyurethane that is applied after the Vulkem 346 intermediate coat has cured. Interlaminary adh...
Cup wheel for concrete
Cup Wheel Diamond Disk
7 and 5 inch
6 Arrow segments
15mm height
30 grit soft bond
Central hole 5/8"-11 thread
Keywords:🔸 Where to buy Gr...
MAPECRETE HARD LI
MAPECRETE HARD LI
Lithium Silicate Densifier and Sealer for Concrete
Mapecrete Hard LI is a water-based, VOC-free, lithium silicate solution use...
Sika Loadflex-524 EZ technologically advanced, two-component, quick-setting, semi-rigid, solvent-free
Sika® Loadflex®-524 EZ is a technologically advanced, two-component, quick-setting, semi-rigid, solvent-free, selflevelling control joint filler.
...
Vulkem 360NF Base Coat - Low VOC, water-cured, rapid setting urethane membrane
Vulkem 360NF Base Coat is a low odor, low VOC, water-cured, rapid setting urethane membrane that bonds firmly to clean, dry concrete and metal. It...
Sika® Level-01 Primer CA one-component, water-dispersed, solvent-free, acrylic-based solution used to prime
Sika® Level-01 PrimerCA is a one-component, water-dispersed, solvent-free, acrylic-based solution used to prime and seal floor surfaces prior to t...
Sika® Florseal WB-18 & -25 ready-to-use; water-based, clear, high gloss, non-yellowing, acrylic emulsion cure and seal
Sika® Florseal WB-18 & -25 are a ready-to-use; water-based, clear, high gloss, non-yellowing, acrylic emulsion cure and seal. They are applied...