ResinTech UV Resistant TRANSPARENT UNIVERSAL EPOXY 100% SOLIDS ( TUE ) 15L - 4 Gals
ResinTech TUE | Transparent Universal Epoxy 100% Solids
Two-Component 100% Solids UV-Resistant Clear Epoxy Base Coat | Product Code: TUE | Brand: ResinTech
ResinTech TUE (Transparent Universal Epoxy) is a premium 100% solids, two-component epoxy floor coating designed for industrial and commercial flooring. It maintains clarity and high gloss even under extended UV exposure, making it ideal for decorative concrete coatings and applications requiring both robust protection and aesthetic appeal. As the structural base coat in the ResinTech Traffic Coating System, TUE delivers exceptional chemical resistance, compressive strength, and adhesion.
Performance Highlights
|
Solids Content 100% |
Pot Life 40–60 min @ 21°C |
Coverage 160–200 sq.ft/gal @ 8 mils DFT |
|
Recoat Window 14–18 hours @ 21°C |
Full Cure 7 days |
Packaging 15 L (4 US gal) kit |
Product Description
ResinTech TUE is a 100% solids, zero-VOC clear epoxy base coat that forms the structural foundation of the ResinTech Traffic Coating System. At 100% solids, there is zero shrinkage — every mil applied stays in the film. It delivers exceptional chemical resistance, compressive strength, and adhesion to the CBE prime coat below and the PPM membrane above. TUE is UV-resistant and non-yellowing, preserving clarity and gloss in decorative applications.
Key Benefits
- 100% Solids: Zero VOC, zero shrinkage — maximum film build per coat with no solvent loss
- UV Resistance: Maintains gloss and clarity, preventing yellowing under prolonged UV exposure
- High Gloss Finish: Resilient surface that enhances the appearance of the substrate
- Chemical Resistance: Protects against acids, alkalis, solvents, and oils
- Abrasion Resistance: Withstands heavy traffic and mechanical wear for long-term performance
- System Engineered: Formulated as the base coat in the ResinTech Traffic Coating System
Typical Applications
- Parkade decks and ramps (base coat in traffic coating system)
- Industrial and commercial flooring
- Warehouses and storage areas
- Garages and automotive service facilities
- Manufacturing plants and loading docks
- Commercial kitchens and wash bays
- Food and beverage — canning, bottling, and distribution
- Educational environments — laboratories, locker rooms, restrooms, pool decks
- Medical/pharmaceutical — laboratories, water therapy rooms, corridors
Technical Specifications
| Property | Value |
|---|---|
| Appearance | Clear or pigmented |
| Solids Content | 100% |
| Mix Ratio (by volume) | 2:1 (Part A : Part B) |
| Pot Life | 40–60 min at 70°F (21°C) |
| Recoat Window | 14–18 hours at 70°F (21°C) |
| Light Foot Traffic | 24 hours |
| Full Cure | 7 days |
| Coverage Rate | 160–200 sq.ft/gal @ 8 mils DFT |
| Application Temp | 50°F–90°F (10°C–32°C) |
| Packaging | 15 L (4 US gal) kit |
Surface Preparation
Diamond grind or shot blast concrete to ICRI CSP 3–4. Remove all dust, oil, grease, curing compounds, and contaminants. Concrete must be dry. Substrate temperature must be at least 3°C above the dew point. Apply over a fully cured ResinTech CBE prime coat within the recoat window.
Application Instructions
- Surface Preparation: Ensure CBE prime coat is fully cured and within the recoat window (14–18 hours at 21°C). Surface must be clean and free of contamination.
- Mixing: Combine Part A and Part B at a 2:1 ratio by volume. Pour Part B into Part A. Mix with a low-speed drill for 2–3 minutes, scraping sides and bottom. Do not aerate. Working time is approximately 40–60 minutes at 21°C.
- Application: Pour mixed material onto the floor and spread with a notched squeegee. Immediately back-roll with a 3/8" nap roller for a uniform, bubble-free finish. Work in manageable sections.
- Broadcast (Optional): For flake or quartz systems, broadcast aggregate into the wet coat to rejection. Allow to cure fully before sweeping excess and applying topcoat.
- Curing: Keep foot traffic off for a minimum of 24 hours. Allow 14–18 hours before recoating. Full mechanical cure achieved at 7 days.
Health & Safety
Read the current Safety Data Sheet (SDS) before use. Wear chemical-resistant gloves (nitrile or neoprene), safety goggles or face shield, and a half-face respirator with organic vapour cartridges during mixing and application. Ensure adequate fresh air ventilation. Epoxy sensitization can occur with repeated skin exposure — always wear gloves. Store in a cool, dry location between 10°C and 30°C.
ResinTech TUE is the base coat in the ResinTech Traffic Coating System — a 100% solids epoxy layer that forms the structural foundation of the system. Applied over the CBE prime coat, TUE delivers exceptional compressive strength, chemical resistance, and adhesion for the PPM waterproofing membrane above it.
Full system:
1. Surface Prep — Diamond grinding to CSP 3–4
2. Crack & Joint Repair — ResinTech PPM-SL
3. Prime Coat — ResinTech CBE (Core Bond Epoxy)
4. Base Coat — ResinTech TUE (100% Solids Epoxy)
5. Membrane Layer — ResinTech PPM (Protective Polymer Membrane)
6. Topcoat — ResinTech HPP or TCU (UV-stable wear surface)
View the complete ResinTech Traffic Coating System guide →
Frequently Asked Questions
What makes TUE different from a standard epoxy primer?
TUE is a 100% solids base coat — not a primer. At 100% solids, there is zero shrinkage and zero VOC loss, meaning every mil applied stays in the film. It delivers significantly higher film build, compressive strength, and chemical resistance than solvent-borne or water-borne epoxy primers.
Does TUE yellow under UV exposure?
TUE is UV-resistant and formulated to resist yellowing, making it suitable for decorative applications and systems where clarity is important. For maximum long-term UV protection on the wear surface, finish with ResinTech HPP or TCU topcoat.
Can TUE be used as a standalone floor coating?
Yes. TUE can be applied as a stand-alone high-build epoxy base coat for warehouses, garages, and industrial floors. For maximum durability and UV stability on the wear surface, finish with ResinTech HPP or TCU topcoat.
Can I broadcast flakes or quartz into TUE?
Yes. TUE is fully compatible with decorative vinyl flake and quartz broadcast systems. Broadcast aggregate into the wet coat to rejection, allow full cure, sweep excess, then apply your topcoat.
How long before I can apply the PPM membrane over TUE?
Recoat window is 14–18 hours at 21°C. Do not exceed the maximum recoat window without abrading the surface — TUE becomes too hard to bond to without mechanical scuffing after 24 hours.
ResinTech — High Performance Coating Systems
Disclaimer: The information provided is for professional reference only and does not replace project specifications, local codes, manufacturer instructions or the current Safety Data Sheet. Performance depends on substrate condition, system design, workmanship and site conditions. Confirm product suitability and system compatibility for your application before use.
Available at Canopus Supply — North Vancouver, BC. Authorized distributor of ResinTech products in British Columbia.
