B-Tuff 308 Heavy Duty Floor Coating, Parking and Walking Waterproofing Deck Membrane 4.5 Gal kit
B-Tuff 308 Heavy Duty Floor Coating, Parking and Walking Waterproofing Deck Membrane 4.5 Gal kit
B-TUFF® 308 is a two component, fast setting, rapid curing, solvent free, flexible, high performance, high solids, urethane-elastomer base membrane that can be applied to prepared interior or exterior concrete, plywood and metal surfaces.
Due to its fast gel time, B-Tuff® 308 is suitable for applications in temperatures as low as 20°F (-6.7°C).
It may be applied in a single application or in multiple applications.
B-Tuff® 308 is also relatively insensitive to moisture and temperature, allowing applications in various temperatures and humidity.
Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.installation of product.
FEATURES
- Applied at any thickness in one application
- Excellent Weathering
- Seamless
- Labor Saving
- May be applied at any thickness in one pass
- MeetstheCriteriaofASTMC-836& E-96
- Non-Gassing
- User Friendly
- Fast Curing (1-4 hours)
- Resists Dirt Attraction
- Good Thermal Stability
- Highly Flexible over extreme temperatures
- No Odor – Re-coat-able
- Meets SCAQMD VOC Requirements
- Excellent Low Temperature Flexibility
TYPICAL USES
- Vehicular Parking Decks
- Portico Waterproofing
- Exterior and Interior Waterproofing Traffic Areas
- Walkways, Patio’s and Stairways
- Sun Rooms
- Metal Roofs
- Mechanical Room
- Heavy Elastomeric Duty Flooring
- Basketball Courts
- Pre-cast Joints
- Block and Masonry
- Curtain Walls
COLOR
- Grey.
- Tan color is available upon request with minimum order of 250 gallons (945 liters). Custom colors are also available with a minimum order of 250 gallons (945 liters).
PACKAGING
- 5 gallon kit:
- One 5 gallon pail (net 4 gallons) of Part-A
- And one 1 gallon can of Part-B.
-
COVERAGE
B-TuffTM 308 may be applied at any rate to achieve desired thickness. Theoretical coverage for 1 mil thickness is one gallon per 1520 sq. ft.
SURFACE PREPARATION
Refer to general guidelines for complete information. Adhesion tests are recommended prior to coating.
MIXING
NOTE: B-TuffT M 308 may NOT be diluted under any circumstances.
DO NOT ESTIMATE, proportions are pre-measured.
Using a mechanical mixer, first pre-mix separately Part-A and Part-B base material thoroughly to obtain an uniform color, making sure to scrape the solids from the bottom and sides of the pail.
Download Data Sheet
Keywords:
🔸 Where to buy Waterproofing, Roof coatings, Deck coatings, Ultra-TUFF Deck Coating coatings, heavy-duty, Solvent-Free, Basecoat for Concrete, use on Concrete, Metal and plywood surfaces, Polytuff Color chart,For metal, Polytuff primer, poly-tuff distributors, Polytuff topcoat, TopShield Polyurethane Sealant
Have Questions? Ask An Expert
Related Products
From this Collection
-
ResinTech UV Resistant TRANSPARENT UNIVERSAL EPOXY 100% SOLIDS (TUE) 15L - 4 Gals$231.00ResinTech TUE (Transparent Universal Epoxy) Specification Product Overview: ResinTech TUE (Trans...
-
ResinTech High Performance Polyaspartic (HPP) 10 L / 2.64 Gal$233.00Product DESCRIPTION HPP is a fast-curing, two-component Polyaspartic floor coating system engine...
-
Metallic Epoxy Pigments$37.00Metallic Epoxy Pigments metallic collection 🔹AppleGreen🔸AztecGold🔹BlackPearl🔸Bronze-Brown...
-
Tremco Vulkem 350NF Base Coat$291.00Single-Component, Low Odour, Low VOC, Urethane Membrane Vulkem® 350NF Base Coat is a single-com...
-
MPC-301 Aliphatic Polyurethane For Finish Coat$176.00MPC-301 is a 2-component, high solids, polyurethane-based aliphatic coating designed as a stable...
-
Aliphatic Top Coat Urethane (TCU)$17.00TCU is a two-component abrasion, chemical and stain resistant, UV stable aliphatic polyeste...
-
Vulkem 346 Top Coat Aliphatic one-component polyurethane$315.00Vulkem 346 Top Coat is an aliphatic one-component polyurethane that is applied after the Vulkem ...
-
Tremco Vulkem 950NF Top Coat$310.00Vulkem 950NF Top Coat is a two-component polyurethane that is applied after the Vulkem 350NF bas...
-
Cup wheel for concrete$66.00Cup Wheel Diamond Disk 7 and 5 inch 6 Arrow segments 15mm height 30 grit soft bond Central...
-
Vulkem 360NF Base Coat - Low VOC, water-cured, rapid setting urethane membrane$351.00Vulkem 360NF Base Coat is a low odor, low VOC, water-cured, rapid setting urethane membrane that...
-
MAPECRETE HARD LI$262.00MAPECRETE HARD LI Lithium Silicate Densifier and Sealer for Concrete Mapecrete Hard LI is a wa...
-
Sika Loadflex-524 EZ technologically advanced, two-component, quick-setting, semi-rigid, solvent-free$51.00Sika® Loadflex®-524 EZ is a technologically advanced, two-component, quick-setting, semi-rigid, ...
-
Sika® Level-01 Primer CA one-component, water-dispersed, solvent-free, acrylic-based solution used to prime$36.00Sika® Level-01 PrimerCA is a one-component, water-dispersed, solvent-free, acrylic-based solutio...
-
Vulkem 191 QD Primer$286.00Vulkem 191 QD Primer PRODUCT DESCRIPTION Vulkem 191 QD Primer is a quick-drying, one-part,...
-
TREMdri 160$183.00TREMdri 160 Single-Component Asphalt Emulsion Waterproofing Membrane TREMdri 160 is a flexible ...
-
Sika® Florseal WB-18 & -25 ready-to-use; water-based, clear, high gloss, non-yellowing, acrylic emulsion cure and seal$187.00Sika® Florseal WB-18 & -25 are a ready-to-use; water-based, clear, high gloss, non-yellowing...
-
B-TUFF® 5600 4.5-gallon kit A Two Component, Solvent Free, Vehicular and Pedestrian Traffic Deck Coating$476.00B-TUFF® 5600 4.5-gallon kit A Two Component, Solvent Free, Vehicular and Pedestrian Traffic Deck...
-
Mapei Ultratop PC – 50LB Bag$48.00Mapei Ultratop PC – 50LB Bag DESCRIPTION : Ultratop PC is a polishable, self-leveling, cement...
-
MAPEI PLANISEAL WR 100 Clear, (5 Gals) 100%-Silane, Penetrating Water Repellen$362.00PLANISEAL WR 100 Clear, 100%-Silane, Penetrating Water Repellent Planiseal WR 100 is a clear, h...
-
Tremco Vulkem 951NF Top Coat$476.00Product Description Vulkem 951NF Top Coat is an aliphatic, low VOC, two-component polyurethane, ...
-
P-TUFF® CLASSIC$256.00P-TUFF® CLASSIC TECHNICAL DATA SHEET SECTION 3.2.3 A Single Component, Water-Catalyzed Base Memb...
-
PRIMER SN - 3 GAL$438.00Two-Component, Filled, Epoxy PrimerPrimer SN is a two-component, filled, epoxy primer specifical...
-
Flex 805 Construction Polyurethane Sealant$12.00Flex 805 Construction Polyurethane Sealant Product Description Flex 805 is a moisture-curing, one...
-
B-TUFF® 921 A Two Component, Fast Curing, Low Odor, NSF Approved, Liquid-Applied$432.00B-TUFF® 921 A Two Component, Fast Curing, Low Odor, NSF Approved, Liquid-Applied FEATURES Bridg...
-
Eco-Crete SL is a self-leveling polyurethane concrete$805.00Eco-Crete™ SL Tennant’s Eco-Crete SL is a self-leveling polyurethane concrete Key Features of...
-
TREMproof® 250GC Single-Component, Rapid Curing, Fluid-Applied Elastomeric Waterproofing Membrane$286.00TREMproof® 250GC Single-Component, Rapid Curing, Fluid-Applied Elastomeric Waterproofing Membra...
-
B-TUFF® 302 NG Single Component Solvent-Free Basecoat for Concrete, Plywood and Metal$220.00B-TUFF® 302 NG Single Component Solvent-Free Basecoat for Concrete, Plywood and Metal B-Tuff® 302...
-
Eco-MPE™ Multi-Purpose Epoxy$220.00Tennant’s Eco-MPE (Multi-Purpose Epoxy), is a low-odor, 100% solids epoxy that self-levels for ...
-
Eco-HTS™ 100$256.00Tennant’s Eco-HTS 100 (High Traffic System) is a low odor/low VOC, durable, chemical resistant,...