ResinTech TUE-FC: The Ultimate Transparent Universal Epoxy Fast Cure
ResinTech TUE-FC: Transparent Universal Epoxy Fast Cure
A technical reference for flooring contractors, concrete coating installers and commercial builders specifying ResinTech TUE-FC where short cure windows are required. Confirm all data against the manufacturer’s current TDS.
What is ResinTech TUE-FC?
ResinTech TUE-FC (Transparent Universal Epoxy Fast Cure) is a transparent epoxy formulated for fast cure. It is used as a clear coat or primer within concrete floor coating assemblies where reduced downtime is a project requirement.
Characteristics (confirm against the manufacturer’s TDS)
1. Fast cure
Formulated for rapid cure; the manufacturer states a return-to-service window in the order of 4–6 hours under standard conditions. Actual cure time depends on temperature, humidity and film thickness; confirm against the TDS.
2. Adhesion
Formulated for adhesion to concrete and compatible coatings, and can be specified as a primer for subsequent layers. Substrate preparation and compatibility must be confirmed for each project.
3. Transparent finish
The transparent formulation allows the underlying surface, media or tint to show through. Confirm clarity and ambering behaviour against the TDS.
4. Versatility
Suitable for a range of applications, from industrial floors to decorative surfaces, within specified assemblies.
Specification Notes
TUE-FC is one component within a specified coating assembly. Recoat windows, coverage rates, primer and topcoat selection must be matched to the project specification and site conditions. Contact Canopus Supply for product availability and manufacturer documentation.
Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.
A technical reference for flooring contractors, concrete coating installers and commercial builders specifying ResinTech TUE-FC where short cure windows are required. Confirm all data against the manufacturer’s current TDS.
What is ResinTech TUE-FC?
ResinTech TUE-FC (Transparent Universal Epoxy Fast Cure) is a transparent epoxy formulated for fast cure. It is used as a clear coat or primer within concrete floor coating assemblies where reduced downtime is a project requirement.
Characteristics (confirm against the manufacturer’s TDS)
1. Fast cure
Formulated for rapid cure; the manufacturer states a return-to-service window in the order of 4–6 hours under standard conditions. Actual cure time depends on temperature, humidity and film thickness; confirm against the TDS.
2. Adhesion
Formulated for adhesion to concrete and compatible coatings, and can be specified as a primer for subsequent layers. Substrate preparation and compatibility must be confirmed for each project.
3. Transparent finish
The transparent formulation allows the underlying surface, media or tint to show through. Confirm clarity and ambering behaviour against the TDS.
4. Versatility
Suitable for a range of applications, from industrial floors to decorative surfaces, within specified assemblies.
Specification Notes
TUE-FC is one component within a specified coating assembly. Recoat windows, coverage rates, primer and topcoat selection must be matched to the project specification and site conditions. Contact Canopus Supply for product availability and manufacturer documentation.
Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.
