Connexion

Pays

Panier

Votre panier est vide
Tremco Willseal Seismic vertical expansion joint seal for joints up to 8 inches
Tremco

Tremco Willseal Seismic Expansion Seal — Vertical, up to 8 in.

Prix de vente$0.00
Authorized Distributor
Stocked in North Vancouver, BC
Pickup & Delivery Across BC
Trade & Professional Grade

Need volume pricing, system advice or a trade account?

Call 250-233-3000 Contact / Trade Account

Technical Documentation

Technical Data Sheet
TDS (PDF)

Always confirm values against the current TDS & SDS before specifying or ordering.

📐 Project-Quoted Product — North Vancouver, BC. Expansion joint systems are sized to your joint width, depth and run length and priced per project. Send us your joint schedule and we confirm pricing and lead time within one business day. Call 250-233-3000 or request a project quote.

Willseal Seismic — Vertical Seismic Expansion Seal

Pre-compressed, silicone-faced foam seal for wide vertical seismic and retrofit joints | Brand: Tremco (Willseal) | Model: Willseal Seismic

Willseal Seismic is a pre-compressed, open micro-cell polyurethane foam seal with hydrophobic acrylic impregnation and a factory-applied silicone face, made for wide seismic and retrofit vertical joints. It is offered in 18 Spectrem colours plus custom, with an optional tamper-resistant higher-durometer coating. Browse the full Tremco range at Canopus Supply.

Professional note: Willseal Seismic handles vertical joints from 1/2 in. up to 8 in. wide with ±50% movement at rapid rates — for horizontal seismic joints, specify Willseal Seismic HS instead.

Performance Highlights

Movement Capability
±50% at rapid rates		 Joint Sizes
1/2 in. to 8 in. (6.5 ft sticks, custom available)		 Foam Fire Rating
UL 94 V-0, Cal 117
Tensile / Elongation
21 psi min / 125% ±20% (ASTM D3574)		 Acoustics
STC 54 / OITC 48		 Hardness / Thermal Conductivity
Shore A 15 / 0.05 W/m·°C (ASTM C518)

Typical Applications

  • Seismic and retrofit joints
  • Precast, masonry and brick facades
  • EIFS and exterior panels

Limitations

  • Vertical joints only — for horizontal joints use Willseal Seismic HS; confirm against the current TDS.
  • Avoid contact with hydrocarbon solvents and corrosive chemicals; confirm against the current TDS.
  • Install at temperatures between −14 °F and 95 °F; confirm against the current TDS.

Health & Safety

The Safety Data Sheet for Willseal Seismic is aligned with GHS requirements. Refer to the manufacturer's Safety Data Sheet for complete information.

Purchasing Note: All sales are intended for professional and trade purchasers. Expansion joint products are ordered to project-specific sizes — confirm joint width, depth, movement class, quantity and delivery requirements when requesting your quote. Product use and installation are the responsibility of the purchaser and installer.
Sizing an expansion joint? Contact Canopus Supply — 250-233-3000

Tremco — Professional Sealants & Waterproofing Systems

Technical information is provided for professional reference only. Product selection, joint sizing, substrate preparation, application and final performance remain the responsibility of the purchaser, installer and project specifier. Always confirm against the current TDS, SDS, project specification and site conditions before use.

Available at Canopus Supply — North Vancouver, BC. Authorized distributor in British Columbia.