SikaScreed®-40 | Polymer-Modified Cementitious Screed Mortar 50 lb

SikaScreed®-40 | Polymer-Modified Cementitious Screed Mortar

Ready-to-Use Polymer-Modified Cementitious Screed Mortar | Brand: Sika

SikaScreed-40 is a ready-to-use cementitious mortar formulated for screeds, localized resurfacing, and slope creation or correction in interior and exterior applications. Can be applied at thicknesses from 10 to 150 mm. Confirm suitability, coverage, cure time, and system compatibility against the current Sika TDS, SDS, and project specification before use.

Key Characteristics

• Ready-to-use — polymer-modified cementitious mortar; confirm mixing requirements against the current TDS.
• Application thickness — 10 to 150 mm (3/8" to 6"); confirm minimum and maximum thickness requirements for your application against the TDS.
• Versatile overlay compatibility — designed for overlay with tile, parquet, carpet, resin-based coatings, or left uncoated for interior installations; confirm overlay compatibility and required cure time against the TDS before specifying.
• Floor heating compatibility — designed for use with water and electric floor heating systems; confirm installation requirements against the TDS.
• Return to service — confirm cure and overlay times against the current TDS as they vary with temperature, humidity, and application thickness.

Typical Applications

• Interior floating and bonded screeds
• Localized resurfacing and slope correction
• Substrate preparation for tile, parquet, carpet, and resin floor coatings
• Screeds over water and electric floor heating systems

Limitations

• Confirm substrate suitability and surface preparation requirements against the current TDS before use.
• Cure and overlay times are temperature and humidity dependent — confirm against the current TDS.
• Confirm exterior suitability and exposure conditions against the TDS before specifying for exterior applications.

Canopus Supply Inc. — Sika Products, Metro Vancouver & BC

Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.