Guides

Applying Floor Coatings in Cold Weather: Temperature, Dew Point and Cure

How cold temperatures affect epoxy and polyaspartic cure, the dew point rule that prevents blush and delamination, and how to coat through a BC winter.

How to Fill Control Joints in Concrete Floors: Semi-Rigid Fillers Done Right

When and how to fill saw-cut control joints with semi-rigid polyurea filler — timing, supporting joint edges under hard-wheel traffic, and the mistakes that let filled joints spall.

Flake Floor Systems Explained: Base Coat, Broadcast and Topcoat Done Right

How flake floor systems are built layer by layer, the choices that change the finish, and the mistakes that make flake jobs fail.

Best Coating for Warehouse Floors: Matching the System to the Traffic

How to choose a warehouse floor system - grind and seal, epoxy builds, fast-turnaround polyaspartic, and why control joints fail first.

Concrete Moisture Testing: The Step That Saves Your Floor Coating

Why slab moisture is the top cause of coating failure, the three standard tests (ASTM D4263, F1869, F2170), and mitigation options when readings come back high.

Polyurea vs Polyurethane: What Is the Difference and When to Use Each

Polyurea and polyurethane compared - chemistry, cure speed, elongation, typical uses in waterproofing and joint filling, and how to choose between them.

Grind and Seal Concrete Floors Explained: A Cost-Effective Finish

What grind and seal is, how it compares to polished concrete and full coatings, the step-by-step process, and where it is the right - and wrong - choice.

Concrete Surface Preparation (CSP) Guide: Getting the Profile Right

A practical guide to concrete surface prep - the CSP scale, grinding vs shot blasting vs scarifying, moisture and dust control, and matching profile to coating.

How to Waterproof a Parkade Deck: Traffic Coating Systems Explained

How parkade and traffic deck waterproofing systems are built layer by layer - primer, membrane, wear coat and topcoat - and how to choose the right products.

Polyaspartic vs Epoxy Floor Coatings: Which Is Right for Your Project?

Epoxy vs polyaspartic floor coatings compared - how each cures, where each performs best, and why many high-performance systems use both.