Concrete Coatings

DESCRIPTIONHPP is a two-component, fast curing polyaspartic coating system designed as a decorative yet durable coating for commercial and industri...

(TUE) is a high solids epoxy. It can be used as a prime coat, build coat or grout coat and is also used in pigmented and decorative flakes and qu...

MPC-100 is a 2-component, 100% solids, self-leveling and high-build epoxy floor coating. It is designed to be used as a protective floor coating o...

 Single-Component, Low Odour, Low VOC, Urethane Membrane Vulkem® 350NF Base Coat is a single-component, low odor, low VOC, urethane membrane that ...

Metallic Epoxy Pigments metallic collection   🔹AppleGreen🔸AztecGold🔹BlackPearl🔸Bronze-Brown🔹ChestnutBrown🔸Cofee🔹SilverGrey🔸SilverPearl 🔹Lus...

MPC-301 is a 2-component, high solids, polyurethane-based aliphatic coating designed as a stable, chemically resistant, UV-stable topcoat. It give...

TCU is a two-component abrasion, chemical and stain resistant, UV stable aliphatic polyester polyurethane finish coat. It is available in clea...

Vulkem 346 Top Coat is an aliphatic one-component polyurethane that is applied after the Vulkem 346 intermediate coat has cured. Interlaminary adh...

Vulkem 950NF Top Coat is a two-component polyurethane that is applied after the Vulkem 350NF base coat has cured. Interlaminary adhesion to Vulkem...

Sikaflex®-1A is a premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Sikaflex-1a can b...

High-Modulus Epoxy Bonding AgentPlanibond EBA is a two-component, multipurpose, high-modulus epoxy bonding agent. Planibond EBA is nonshrink, 100%...

Cup Wheel Diamond Disk 7 and 5 inch   6 Arrow segments 15mm height 30 grit soft bond Central hole 5/8"-11 thread   Keywords:🔸 Where to buy Gr...

Vulkem 360NF Base Coat is a low odor, low VOC, water-cured, rapid setting urethane membrane that bonds firmly to clean, dry concrete and metal. It...

MAPECRETE HARD LI Lithium Silicate Densifier and Sealer for Concrete Mapecrete Hard LI is a water-based, VOC-free, lithium silicate solution use...

Sika® Loadflex®-524 EZ is a technologically advanced, two-component, quick-setting, semi-rigid, solvent-free, selflevelling control joint filler. ...

Vulkem 351 Top Coat is an aliphatic, single-component polyurethane, which when used in conjunction with the recommended aggregate, creates a tough...

Vulkem® 45SSL  semi-self-leveling, single-component, moisture-curing, low-modulus, polyurethane sealant.     Download Data Sheet Keywords...

Sika® Level-01 PrimerCA is a one-component, water-dispersed, solvent-free, acrylic-based solution used to prime and seal floor surfaces prior to t...

Mapefloor Finish 58 W   Two-Component, Clear, Matte, Aliphatic Polyurethane Coating Mapefloor Finish 58 W is a two-component, aliphatic poly...

Vulkem 191 QD Primer   PRODUCT DESCRIPTION Vulkem 191 QD Primer is a quick-drying, one-part, moisture-curing primer for use to promote interla...

B-TUFF® 5600 4.5-gallon kit A Two Component, Solvent Free, Vehicular and Pedestrian Traffic Deck Coating   B-Tuff® 5600 is a warranted system that...

PLANISEAL WR 100 Clear, 100%-Silane, Penetrating Water Repellent Planiseal WR 100 is a clear, high-performance, 100%-silane, penetrating water re...

Sika® Florseal WB-18 & -25 are a ready-to-use; water-based, clear, high gloss, non-yellowing, acrylic emulsion cure and seal. They are applied...

Product Description Vulkem 951NF Top Coat is an aliphatic, low VOC, two-component polyurethane, which when used in conjunction with the recommende...