ResinTech PPM-SL is a semi self-leveling polymer repair and waterproofing sealant designed for filling, sealing, and reinforcing cracks, joints, and surface defects in concrete. It provides a flexible, moisture-resistant repair layer suitable for interior and exterior use, including areas exposed to water and thermal movement.

This material is used as a detailing and preparation component prior to installing ResinTech PPM and other coatings or membrane systems to ensure a uniform substrate and long-term performance.

Characteristics:

• Semi self-leveling consistency with minimal tooling required

• Waterproof seal after curing

• High adhesion to concrete and previously coated substrates

• Flexible to accommodate substrate movement

• Low shrinkage and non-brittle finish

• Compatible with polymer coating and traffic systems

• Interior and exterior use

Typical Applications:

• Crack and joint repair prior to coating

• Wall-to-floor and edge terminations

• Perimeter detailing and drain surrounds

• Surface defect correction before membrane or coating installation

• Suitable for balconies, pool decks, parkades, industrial floors, mechanical rooms, and exposed concrete areas

Application:

1. Substrate must be clean, dry, and free of contaminants.
2. Dispense PPM-SL directly from the tube.
3. Spread or press into place using a trowel or putty blade if required.
4. Allow curing before applying the final coating system.

Packaging: 500 g flexible squeeze tube (no caulking gun required).

Coverage: Varies depending on joint width and depth.