{"product_id":"resintech-slt-self-levelling-topping","title":"ResinTech SLT — Self-Levelling Topping — 50 lb (22.7 kg)","description":"\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:6px;padding:12px 16px;margin:0 0 18px 0;\"\u003e\u003cp style=\"margin:0;font-size:1.02em;color:#1C4F8A;\"\u003e\u003cstrong\u003eStocked by Canopus Supply — North Vancouver, BC.\u003c\/strong\u003e Call 250-233-3000 to confirm current availability or arrange pickup. Ships across Canada and the USA.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eResinTech SLT — Self-Levelling Topping\u003c\/h2\u003e\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003ePolishable Cementitious Floor Topping • Interior \u0026amp; Exterior • 50 lb (22.7 kg) bag\u003c\/strong\u003e | Brand: ResinTech | Code: SLT (formerly SLC)\u003c\/p\u003e\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eResinTech SLT is a cementitious self-levelling topping that cures to a smooth, flat, dense and durable floor. Use it as the finished cementitious floor topping — sealed, or ground and polished — or as a levelling underlayment beneath epoxy, polyaspartic, resin, tile and vinyl flooring systems. ResinTech states it is suitable for interior and exterior floors; it is applied at 5–40 mm. For use by trained flooring contractors and applicators. Confirm suitability against the current ResinTech TDS, SDS and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eProfessional note:\u003c\/strong\u003e ResinTech SLT can stay exposed as the finished floor or go under another flooring system. Where it is the finished floor, seal it with a compatible sealer, or grind and polish it and apply a densifier\/sealer. For heavy industrial or vehicular traffic, apply a compatible flooring or coating system rather than leaving it bare. Browse the full \u003ca href=\"\/collections\/resintech-products\" style=\"color:#1C4F8A;\"\u003eResinTech range\u003c\/a\u003e.\u003c\/div\u003e\n\u003ch2 style=\"color:#1C4F8A;\"\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid early-strength gain\u003c\/strong\u003e — declared compressive strength 8.0 MPa min. at 24 h; light foot traffic in approx. 2 h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow drying shrinkage\u003c\/strong\u003e — 0.05% max. (declared), reducing cracking and delamination risk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-smoothing, high-flow formula\u003c\/strong\u003e for a flat, dense, durable surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong substrate adhesion\u003c\/strong\u003e — bond strength 2.0 MPa min. (declared)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolishable finished floor topping\u003c\/strong\u003e (ResinTech product-use statement; see FAQ) — also suitable as a levelling underlayment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior and exterior\u003c\/strong\u003e applications per ResinTech; low odour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color:#1C4F8A;\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:42%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eCompressive strength, 28 d\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e35.0 MPa min. (declared)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eCompressive strength, 24 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e8.0 MPa min.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eFlexural strength, 28 d \/ 24 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e8.0 MPa min. \/ 4.0 MPa min.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eBond strength (tensile adhesion)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e2.0 MPa min.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eFlow, initial \/ after 20 min\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e130 mm min. \/ 130 mm min.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eDrying shrinkage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e0.05% max.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eAbrasion resistance\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e619 mm³ (declared; manufacturer-declared limit 800 mm³ max.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eApplication thickness\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e5–40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eCoverage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eApprox. 16.3 sq ft (1.5 m²) per 50 lb bag at 10 mm (theoretical, from 15 kg\/m² at 10 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eMixing water\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e4.5–5 L of clean water per 50 lb (22.7 kg) bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eApplication temperature\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e5 to 35 °C; substrate moisture below 4%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eLight foot traffic \/ floor coverings \/ full cure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eApprox. 2 h at 20 °C \/ approx. 24 h \/ approx. 7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eNet weight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e50 lb (22.7 kg) per bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eShelf life\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e6 months from production, in original unopened packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eStorage\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eIndoors in a cool, dry place; keep sealed and protect from moisture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eStrength, flow, shrinkage, bond and abrasion values are the manufacturer's declared values determined by the JC\/T 985-2017 test methods (ASTM equivalents for comparison only: C109, C348, C1583, C1708, C157, C779). JC\/T 985-2017 is scoped to interior floors; exterior suitability and polishability are ResinTech product-use statements, not test results. No freeze–thaw or de-icing-salt test data has been published — confirm exposed exterior use with ResinTech for the specific project.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2 style=\"color:#1C4F8A;\"\u003eCoverage per 50 lb Bag\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eTheoretical, based on approx. 15 kg\/m² at 10 mm thickness on a smooth, level substrate. Actual coverage varies with substrate profile, porosity and application method — verify by mock-up.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:42%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eThickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eApprox. coverage per bag\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e5 mm (min.)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e32.6 sq ft (3.0 m²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10 mm\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e16.3 sq ft (1.5 m²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e20 mm\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e8.1 sq ft (0.76 m²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e30 mm\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e5.4 sq ft (0.50 m²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e40 mm (max.)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e4.1 sq ft (0.38 m²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFinished cementitious floor topping for commercial, retail, industrial and residential floors — sealed or polished\u003c\/li\u003e\n\u003cli\u003ePolished self-levelling concrete topping over sound existing slabs (confirm the grinding sequence by mock-up)\u003c\/li\u003e\n\u003cli\u003eRenovation and resurfacing of sound, uneven or worn concrete, interior or exterior\u003c\/li\u003e\n\u003cli\u003eLevelling underlayment beneath epoxy, polyaspartic, resin, tile and vinyl flooring systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color:#1C4F8A;\"\u003eDirections for Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare\u003c\/strong\u003e a clean, sound, dust-free substrate, free of oil, laitance and curing compounds. Mechanically prepare as required and install edge forms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime\u003c\/strong\u003e as required by substrate porosity and condition; let the primer cure as directed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix\u003c\/strong\u003e one full 50 lb (22.7 kg) bag into 4.5–5 L of clean water with a low-speed drill and paddle to a lump-free, pourable consistency. Do not over-water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePour and spread\u003c\/strong\u003e to 5–40 mm within the working time; use a spiked roller to release entrapped air.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtect\u003c\/strong\u003e from rapid drying, rain and traffic until set. Seal once an acceptable moisture content is reached, or grind and polish after the topping has gained strength (not before 24 h; confirm by mock-up).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 style=\"color:#1C4F8A;\"\u003eResinTech SLT as an Alternative to Mapei® Ultratop® PC and SikaLevel®-250 \/ Sika® Level-25\u003c\/h2\u003e\n\u003cp\u003eContractors in BC often search for a \u003cstrong\u003epolishable self-levelling concrete topping\u003c\/strong\u003e by the brand they already know. ResinTech SLT is a Canadian-distributed alternative in the same category — a 50 lb bag, 5–40 mm, self-levelling cementitious topping that can be left exposed, sealed or polished. The table compares published figures from each manufacturer's current Canadian data sheet so you can judge fit for your project; it is not a claim of equivalence.\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;font-size:0.95em;\"\u003e\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003ePublished figure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eResinTech SLT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eMapei Ultratop PC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eSikaLevel-250\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003ePositioning\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003eFinished topping (sealed or polished) or underlayment\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003ePolishable topping\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003eUnderlayment only — not a wear layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003eBag\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e50 lb (22.7 kg)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e50 lb (22.7 kg)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e50 lb (22.7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003eThickness\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e5–40 mm\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e10–50 mm neat\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e3–30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003eWater per bag\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e4.5–5 L\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e3.63 L\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e4.75–5 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003eCoverage at 10 mm\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e≈16.3 sq ft (theoretical)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e14.1 sq ft\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e≈15 sq ft (interpolated from 6 \/ 12 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003eCompressive strength, 28 d\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e35 MPa min. (JC\/T 985-2017)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e\u0026gt; 50 MPa (ASTM C109)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e34.9 MPa (ASTM C109 mod.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003eInterior \/ exterior\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003eBoth (ResinTech statement)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003eBoth; not where de-icing salts are used\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003eInterior only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003eShelf life\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e6 months\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e6 months\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:8px;\"\u003e12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp style=\"color:#777;font-size:0.85em;\"\u003e\u003cem\u003eCompetitor figures are taken from Mapei's Ultratop PC TDS (ed. 2013-12-20) and Sika Canada's SikaLevel-250 PDS (v02.10, March 2026) as published online on 9 October 2026; check each manufacturer's current sheet before specifying. \"Sika Level-25\" is an earlier name for Sika's 22.7 kg self-levelling product line. Mapei® and Ultratop® are trademarks of Mapei S.p.A.; Sika® and SikaLevel® are trademarks of Sika AG. Canopus Supply and ResinTech are not affiliated with or endorsed by either company; brand names are used only to identify the products being compared.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2 style=\"color:#1C4F8A;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eCan ResinTech SLT be left as the finished floor?\u003c\/h3\u003e\u003cp\u003eYes. SLT is a cementitious floor topping and can stay exposed as the finished floor — sealed with a compatible sealer, or ground and polished. For heavy industrial or vehicular traffic, apply a compatible flooring system over it.\u003c\/p\u003e\n\u003ch3\u003eCan ResinTech SLT be polished like Mapei Ultratop PC?\u003c\/h3\u003e\u003cp\u003eResinTech states the cured topping can be mechanically ground and polished. ResinTech has not yet published a polishing procedure or gloss data, so establish the grinding sequence, start time (not before 24 h) and expected appearance by site mock-up before committing a project.\u003c\/p\u003e\n\u003ch3\u003eCan ResinTech SLT be used outside?\u003c\/h3\u003e\u003cp\u003eResinTech states SLT is suitable for interior and exterior floors. No freeze–thaw or de-icing-salt test data has been published; for exterior floors that freeze while saturated or see de-icing salts, confirm suitability with ResinTech for your project and protect the surface with a suitable sealer.\u003c\/p\u003e\n\u003ch3\u003eHow much water per bag?\u003c\/h3\u003e\u003cp\u003e4.5–5 L of clean water per 50 lb (22.7 kg) bag. Excess water reduces strength and increases shrinkage.\u003c\/p\u003e\n\u003ch3\u003eHow many bags do I need?\u003c\/h3\u003e\u003cp\u003eAbout 16.3 sq ft per bag at 10 mm (theoretical). Use the coverage table above for other thicknesses and allow extra for substrate profile and waste.\u003c\/p\u003e\n\u003ch3\u003eIs SLT the same product as ResinTech SLC?\u003c\/h3\u003e\u003cp\u003eSLT replaces the ResinTech SLC listing. It is now supplied in a 50 lb (22.7 kg) bag with updated mixing, thickness, coverage and shelf-life figures — use the SLT figures on this page and in the SLT TDS v2.1 \/ SDS v2.0.\u003c\/p\u003e\n\u003ch2 style=\"color:#1C4F8A;\"\u003eHealth \u0026amp; Safety\u003c\/h2\u003e\n\u003cp\u003eContains Portland cement and crystalline silica. Wet mortar is alkaline and can cause serious skin and eye burns; dust — including grinding dust — can irritate the eyes and respiratory tract, and repeated inhalation of respirable crystalline silica may cause lung disease. Wear waterproof gloves, eye protection and a suitable respirator; use wet methods or HEPA extraction when grinding. Read the current SDS before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eRelated ResinTech products:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/resintech-core-bond-epoxy-cbe-15l-4-gals\" style=\"color:#1C4F8A;\"\u003eCBE — Core Bond Epoxy\u003c\/a\u003e · \u003ca href=\"\/products\/transparent-universal-epoxy-100-solids-tue\" style=\"color:#1C4F8A;\"\u003eTUE — Transparent Universal Epoxy\u003c\/a\u003e · \u003ca href=\"\/products\/high-performance-polyaspartic-hpp\" style=\"color:#1C4F8A;\"\u003eHPP — Polyaspartic Topcoat\u003c\/a\u003e · \u003ca href=\"\/products\/resintech-chemical-resistant-urethane-cru\" style=\"color:#1C4F8A;\"\u003eCRU — Chemical-Resistant Urethane\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:4px;padding:16px 20px;margin:20px 0;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eTrade Purchasing Note\u003c\/strong\u003e\u003cp style=\"margin:8px 0 0 0;\"\u003eAll sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, exposure conditions, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eOrder Enquiries \u0026amp; Volume Orders\u003c\/strong\u003e\u003cp style=\"margin:8px 0 0 0;\"\u003e\u003cstrong\u003eCall:\u003c\/strong\u003e 250-233-3000 · \u003cstrong\u003eEmail:\u003c\/strong\u003e \u003ca href=\"mailto:order@canopussupply.com\"\u003eorder@canopussupply.com\u003c\/a\u003e · \u003cstrong\u003ePickup:\u003c\/strong\u003e Unit 103, 185 Forester Street, North Vancouver, BC\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size:0.85em;color:#777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time and final performance remain the responsibility of the purchaser, installer and project specifier. Always confirm against the current ResinTech TDS, SDS, project specification and site conditions.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorised ResinTech Distributor, North Vancouver, BC\u003c\/p\u003e\n","brand":"ResinTech","offers":[{"title":"Default Title","offer_id":51565451772124,"sku":"RT-SLT-50LB","price":38.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/SLC.png?v=1789853441","url":"https:\/\/www.canopussupply.com\/products\/resintech-slt-self-levelling-topping","provider":"Canopus Supply Inc","version":"1.0","type":"link"}