{"product_id":"resintech-ppm-protective-polyurea-membrane","title":"ResinTech PPM Protective Polyurea Membrane","description":"\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:6px;padding:12px 16px;margin:0 0 18px 0;\"\u003e\u003cp style=\"margin:0;font-size:1.02em;color:#1C4F8A;\"\u003e\u003cstrong\u003e✅ Usually In Stock — North Vancouver, BC.\u003c\/strong\u003e Call 250-233-3000 to confirm availability or arrange pickup.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eResinTech PPM — Protective Polyurea Membrane\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSingle-Component, Moisture-Cured, UV-Stable Polyurea Waterproofing \u0026amp; Protective Membrane\u003c\/strong\u003e | Brand: ResinTech | Product code: PPM\u003c\/p\u003e\n\u003cp\u003eResinTech PPM is a premium single-component, moisture-cured polyurea that reacts with ambient humidity to form a continuous, seamless, pinhole-free elastomeric membrane. It builds a tough, highly flexible, UV-stable film with excellent adhesion to concrete and steel, and is applied by brush, roller, notched squeegee or airless spray on horizontal, vertical and inclined surfaces. PPM is used both as a stand-alone liquid-applied waterproofing membrane and as a UV-stable protective topcoat over ResinTech FLEXCOAT-PU and other ResinTech membranes within approved ResinTech assemblies — confirm the system build, film thickness, primer and topcoat requirements for each use against the current TDS and project specification.\u003c\/p\u003e\n\u003cp\u003eAs a true single-component polyurea, ResinTech PPM combines high elongation (typical 648% — see properties below), fast single-product application with no on-site proportioning, and UV-stable chemistry. Because it can be installed as a stand-alone waterproofing membrane and as a UV-stable, wear-resistant topcoat, it consolidates multiple products into one system — used in the same applications as, and as an alternative to, conventional liquid-applied polyurea and PU deck membranes such as Sikalastic TC 225 and Tremco 346. Product performance and system build differ between manufacturers; always confirm suitability against the current TDS and project specification before substituting any product.\u003c\/p\u003e\n\u003cp style=\"font-size:0.85em;color:#777;\"\u003e\u003cem\u003eSikalastic is a registered trademark of Sika; Tremco is a registered trademark of Tremco. Product names are used for identification and comparison only; no affiliation or endorsement is implied.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUV-stable protective topcoat over FLEXCOAT-PU on balconies, podiums and walkway decks\u003c\/li\u003e\n  \u003cli\u003eStand-alone single-coat waterproofing on planters, foundation walls and retaining walls\u003c\/li\u003e\n  \u003cli\u003eBelow-grade and buried-structure waterproofing\u003c\/li\u003e\n  \u003cli\u003eConcrete deck waterproofing and protection\u003c\/li\u003e\n  \u003cli\u003eParkade, ramp and mechanical-room floors\u003c\/li\u003e\n  \u003cli\u003eSwimming pool decks, tanks and containment areas\u003c\/li\u003e\n  \u003cli\u003eRoofing and waterproofing details\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor sustained pedestrian or vehicular traffic, finish with a compatible ResinTech wear topcoat.\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eSubstrates \u0026amp; Surface Preparation\u003c\/h3\u003e\n\u003cp\u003eSubstrates must be structurally sound, clean, dry and free of bond-inhibiting contaminants. \u003cstrong\u003eConcrete:\u003c\/strong\u003e minimum 28-day cure; mechanically profile to CSP 3 (ICRI). \u003cstrong\u003eSteel:\u003c\/strong\u003e abrasive-blast to near-white metal (SSPC-SP 10 \/ NACE No. 2). \u003cstrong\u003eCracks \u0026amp; joints:\u003c\/strong\u003e embed reinforcing fabric where movement is anticipated. \u003cstrong\u003ePriming:\u003c\/strong\u003e ResinTech CBE or TUE may be used to enhance adhesion. Keep the substrate at least 3 °C above the dew point during application and cure.\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eApplication \u0026amp; Curing\u003c\/h3\u003e\n\u003cp\u003eApply directly from the container by brush, roller, squeegee or airless spray — no proportioning required. Recommended dry film thickness (waterproofing): \u003cstrong\u003e47–59 mils\u003c\/strong\u003e (1.2–1.5 mm). Consumption: ~1.5–1.8 kg\/m². Coverage: ~2.0–2.5 m²\/L (≈80–100 ft²\/US gal), method- and thickness-dependent. Do not exceed the recommended single-coat film thickness (blistering risk). Clean tools with solvent before cure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCure (typical, 20 °C \/ 50% RH):\u003c\/strong\u003e tack-free 2–3 h; recoat window 16–24 h; through-dry ~9 h; full cure 24–48 h. Cure and recoat times lengthen at lower temperatures, lower humidity, or in poorly ventilated spaces; confirm conditions before recoating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoof build:\u003c\/strong\u003e Over occupied space, apply as a multi-coat system — three lifts at ~20–25 mils wet each, ~60 mils (≈1.5 mm) total dry. Non-occupied roofs: ~20–25 mils total is typical. Confirm final film thickness and detailing against project design.\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eTypical Physical \u0026amp; Performance Properties\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003eTypical values at 20 °C \/ 50% RH. Actual results depend on substrate, film build, detailing and site conditions. Confirm against project specification.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\" border=\"1\" cellpadding=\"6\"\u003e\n\u003cthead\u003e\u003ctr style=\"background:#1C4F8A;color:#fff;\"\u003e\n\u003cth align=\"left\"\u003eProperty\u003c\/th\u003e\n\u003cth align=\"left\"\u003eTypical Value\u003c\/th\u003e\n\u003cth align=\"left\"\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength\u003c\/td\u003e\n\u003ctd\u003e2.45 MPa (355 psi)\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at Break\u003c\/td\u003e\n\u003ctd\u003e648%\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear Strength\u003c\/td\u003e\n\u003ctd\u003e19 N\/mm\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D624\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBond Strength to Concrete\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;2.5 MPa (\u0026gt;355 psi)\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D4541 (pull-off)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e~65 Shore A\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D2240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd\u003eTaber Abrasion\u003c\/td\u003e\n\u003ctd\u003eNo measurable mass loss\u003c\/td\u003e\n\u003ctd\u003eASTM D4060 — CS-17 wheel, 1000 g load, 1000 cycles (ResinTech in-house test)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eDurability \u0026amp; Environmental Resistance\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\" border=\"1\" cellpadding=\"6\"\u003e\n\u003cthead\u003e\u003ctr style=\"background:#1C4F8A;color:#fff;\"\u003e\n\u003cth align=\"left\"\u003eProperty\u003c\/th\u003e\n\u003cth align=\"left\"\u003eTypical Value\u003c\/th\u003e\n\u003cth align=\"left\"\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-Temperature Flexibility\u003c\/td\u003e\n\u003ctd\u003e-35 °C, no cracking\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D522\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat Aging (80 °C, 168 h) — Tensile \/ Elongation Retention\u003c\/td\u003e\n\u003ctd\u003e95% \/ 566%\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D573\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlkali Immersion (168 h) — Tensile \/ Elongation Retention\u003c\/td\u003e\n\u003ctd\u003e93% \/ 564%\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D471\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcid Immersion (168 h) — Tensile \/ Elongation Retention\u003c\/td\u003e\n\u003ctd\u003e94% \/ 559%\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D471\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Resistance (polyurea)\u003c\/td\u003e\n\u003ctd\u003eUV-stable chemistry; resists cracking and embrittlement on exterior exposure\u003c\/td\u003e\n\u003ctd\u003eBased on polyurea chemistry \u0026amp; manufacturer data; final exterior performance varies with system build \u0026amp; exposure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical \u0026amp; Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\" border=\"1\" cellpadding=\"6\"\u003e\n\u003cthead\u003e\u003ctr style=\"background:#1C4F8A;color:#fff;\"\u003e\n\u003cth align=\"left\"\u003eProperty\u003c\/th\u003e\n\u003cth align=\"left\"\u003eTypical Value\u003c\/th\u003e\n\u003cth align=\"left\"\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater Impermeability\u003c\/td\u003e\n\u003ctd\u003eImpermeable at 0.3 MPa, 120 min\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D5385\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolids Content\u003c\/td\u003e\n\u003ctd\u003e88.5%\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D1353\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater Absorption\u003c\/td\u003e\n\u003ctd\u003e2.8%\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D570\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC Content\u003c\/td\u003e\n\u003ctd\u003e19.2 g\/L\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D2369 \/ EPA Method 24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThrough-Dry Time\u003c\/td\u003e\n\u003ctd\u003e~9 h\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking \/ Action Time\u003c\/td\u003e\n\u003ctd\u003e~21 h\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eUV note:\u003c\/strong\u003e ResinTech PPM is a UV-stable polyurea. Owing to its polyurea chemistry, it resists the cracking, embrittlement and loss of waterproofing integrity associated with UV exposure, and is suitable for exposed exterior use as a topcoat over FLEXCOAT-PU and other ResinTech membranes or as a stand-alone membrane. As with all liquid-applied coatings, ultimate exterior durability and any change in surface colour or gloss depend on film build, detailing, application quality and exposure conditions; confirm suitability for the specific exposure against the current TDS and project specification. Where a specific long-term colour or gloss appearance is required, finish with a ResinTech colour-stable topcoat (e.g., HPP or TCU).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasion note:\u003c\/strong\u003e Under Taber testing (ASTM D4060, CS-17 wheel, 1000 g load, 1000 cycles), PPM showed no measurable mass loss. This is attributed to the coating's high elasticity, which deforms elastically under the abrasive wheel rather than eroding. Taber mass-loss characterizes grinding abrasion and is not a substitute for a traffic-wear rating; specify a wear topcoat for sustained traffic.\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003ePackaging, Storage \u0026amp; Shelf Life\u003c\/h3\u003e\n\u003cp\u003ePackaging: 10 L pails. Storage: cool, dry, 5–30 °C; protect from direct sunlight, moisture ingress and freezing. Shelf life: 12 months unopened.\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not exceed the recommended single-coat film thickness (blistering risk).\u003c\/li\u003e\n\u003cli\u003eUse reinforcing fabric at cracks and expansion joints.\u003c\/li\u003e\n\u003cli\u003eNot intended as a vapor barrier or for negative-side hydrostatic pressure without additional design measures.\u003c\/li\u003e\n\u003cli\u003eNot a rated traffic-wear surface on its own under sustained foot or vehicle traffic — protect with a compatible ResinTech topcoat.\u003c\/li\u003e\n\u003cli\u003eConfirm suitability for immersion or chemical service against project conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eHealth \u0026amp; Safety\u003c\/h3\u003e\n\u003cp\u003eUse with adequate ventilation. Avoid skin and eye contact; wear PPE consistent with industrial polyurethane \/ polyurea coating practice. Refer to the ResinTech PPM Safety Data Sheet (SDS) for complete health and safety information.\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eDisclaimer\u003c\/h3\u003e\n\u003cp\u003eInformation herein is based on manufacturer data, laboratory testing and field application experience. Because installation conditions are beyond our control, field results may vary. Confirm all values against the current TDS, SDS and project specification before use.\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cem\u003eResinTech PPM — Technical Data Sheet, TDS-PPM v2.2. Canopus Supply Inc., North Vancouver, BC · 250-233-3000\u003c\/em\u003e\u003c\/p\u003e","brand":"ResinTech","offers":[{"title":"Default Title","offer_id":47091503464668,"sku":null,"price":270.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/resintech-ppm-waterproofing-membrane-4851022.jpg?v=1782540793","url":"https:\/\/www.canopussupply.com\/products\/resintech-ppm-protective-polyurea-membrane","provider":"Canopus Supply Inc","version":"1.0","type":"link"}