{"product_id":"eco-mpe-multi-purpose-epoxy","title":"Eco-MPE™ Multi-Purpose Epoxy","description":"\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eEco-MPE™ Multi-Purpose Epoxy\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eVersatile, Solvent-Free Two-Component Epoxy System\u003c\/strong\u003e | Brand: Eco\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eEco-MPE™ is a versatile, solvent-free, two-component epoxy system for concrete floor coating, priming, and bonding applications. Its multi-purpose formulation is designed for contractors and facility managers who need a single epoxy product that can be used across different substrate conditions and system requirements. Confirm suitability, coverage, cure time, and system compatibility against the current TDS, SDS, and project specification before use.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eProfessional note:\u003c\/strong\u003e Substrate preparation is critical. Concrete must be mechanically profiled, clean, dry, and free of laitance, oil, and curing compounds. \u003cstrong\u003eMoisture testing is essential\u003c\/strong\u003e before application. Confirm suitability for your specific application and substrate against the current TDS before use.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eEco-MPE™ is a 100% solids, two-component epoxy that cures to a hard, durable film. Its formulation allows it to be used as a penetrating primer on porous or lightly profiled concrete, a mid-build coating in multi-layer floor systems, or a bonding agent for overlays and toppings; confirm the appropriate application rate and method against the current TDS for each use case. The solvent-free chemistry minimizes VOC emissions; confirm ventilation requirements against the SDS.\u003c\/p\u003e\n\n\u003cp\u003eOnce cured, Eco-MPE™ provides a smooth, cleanable surface with resistance to oils, mild chemicals, and cleaning agents; confirm chemical compatibility against the TDS and project specification. It is designed for use with decorative flake and quartz broadcast systems and can be topcoated with polyurethane or polyaspartic finishes; confirm system compatibility against the TDS before ordering.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose formulation\u003c\/strong\u003e — designed for use as a primer, mid-build coat, or bonding agent; confirm the appropriate application rate and method against the TDS for each use case.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% solids, solvent-free\u003c\/strong\u003e — low VOC; confirm ventilation requirements against the SDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to concrete\u003c\/strong\u003e — designed for adhesion to mechanically prepared concrete substrates; final adhesion depends on substrate condition, surface profile, moisture content, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance properties\u003c\/strong\u003e — formulated with resistance to common industrial chemicals, oils, and cleaning agents after cure; confirm chemical compatibility against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, cleanable finish\u003c\/strong\u003e — creates a continuous floor surface; final appearance depends on substrate condition and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatible\u003c\/strong\u003e — designed for use with decorative flake, quartz broadcast, and polyurethane or polyaspartic topcoat systems; confirm system compatibility against the TDS before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication methods\u003c\/strong\u003e — roller, squeegee, or brush; confirm the appropriate method and coverage rate against the TDS for each use case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePenetrating epoxy primer on porous or lightly profiled concrete\u003c\/li\u003e\n\u003cli\u003eMid-build floor coating in multi-layer epoxy systems\u003c\/li\u003e\n\u003cli\u003eBonding agent for cementitious overlays and toppings\u003c\/li\u003e\n\u003cli\u003eCommercial and light industrial concrete floor coatings\u003c\/li\u003e\n\u003cli\u003eBase coat for decorative flake or quartz broadcast systems\u003c\/li\u003e\n\u003cli\u003eGarage, warehouse, and institutional floor coatings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e\u003cbr\u003eTwo-component epoxy, 100% solids\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eVOC\u003c\/strong\u003e\u003cbr\u003eSolvent-free \/ Low VOC\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003cbr\u003ePrimer, mid-build, or bonding agent — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eTraffic Suitability\u003c\/strong\u003e\u003cbr\u003eFoot and light vehicular — confirm against TDS\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003eRoller, squeegee, or brush\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eUV Stability\u003c\/strong\u003e\u003cbr\u003eNot UV stable — topcoat required for exposed areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eConcrete must be mechanically profiled (shot-blasted or ground to the CSP specified in the TDS), clean, dry, and free of laitance, oil, grease, curing compounds, and incompatible coatings. Conduct moisture testing before application. Repair cracks and voids with a compatible repair mortar prior to coating.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eApplication Instructions\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e Profile and clean the concrete as described above. Confirm moisture levels are within acceptable limits per the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e Combine Part A and Part B at the ratio specified in the TDS. Mix thoroughly with a low-speed mixer for the full recommended time. Do not thin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimer application (if used as primer):\u003c\/strong\u003e Apply at a thin, penetrating rate by roller or brush per the TDS. Allow to tack before applying subsequent coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating application:\u003c\/strong\u003e Pour mixed material onto the floor and spread evenly with a notched squeegee. Back-roll immediately with a phenolic-core roller for uniform film build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast (if applicable):\u003c\/strong\u003e For flake or quartz systems, broadcast aggregate into the wet coating to refusal. Remove excess after cure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcoat (if applicable):\u003c\/strong\u003e Apply an approved polyurethane or polyaspartic topcoat within the recoat window specified in the TDS.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNot UV stable — requires a UV-stable topcoat for exposed or sunlit areas.\u003c\/li\u003e\n\u003cli\u003eDo not apply to damp, contaminated, or unsound concrete.\u003c\/li\u003e\n\u003cli\u003eDo not apply below minimum temperature or when substrate temperature is within 3°C of the dew point; confirm temperature requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003ePot life is temperature-dependent — work in manageable batches in warm conditions; confirm pot life against the TDS.\u003c\/li\u003e\n\u003cli\u003eNot recommended for areas subject to continuous water immersion without system approval.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eStorage \u0026amp; Shelf Life\u003c\/h2\u003e\n\u003cp\u003eStore in original, unopened containers in a cool, dry area away from direct sunlight and freezing. Confirm shelf life and storage temperature requirements against the current TDS and product label.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eHealth \u0026amp; Safety\u003c\/h2\u003e\n\u003cp\u003eRead the current Safety Data Sheet (SDS) before use. Contains epoxy resins and amine hardeners — wear gloves, eye protection, and ensure adequate ventilation during mixing and application. Refer to the SDS for full hazard classification and first-aid measures.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eCan Eco-MPE™ be used as both a primer and a floor coating?\u003c\/h3\u003e\n\u003cp\u003eIts multi-purpose formulation is designed to be applied at a thin, penetrating rate as a primer on porous concrete, or at a higher build rate as a mid-coat or standalone floor coating. Confirm the appropriate application rate and method against the current TDS for each use case.\u003c\/p\u003e\n\n\u003ch3\u003eIs it UV stable?\u003c\/h3\u003e\n\u003cp\u003eNo. Like most epoxy systems, Eco-MPE™ will amber and chalk under UV exposure. For exterior or sunlit areas, apply an approved UV-stable polyurethane or polyaspartic topcoat over the cured epoxy.\u003c\/p\u003e\n\n\u003ch3\u003eWhat decorative systems is it compatible with?\u003c\/h3\u003e\n\u003cp\u003eEco-MPE™ is designed for use with vinyl flake and quartz broadcast decorative systems. Confirm system compatibility against the current TDS before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the pot life after mixing?\u003c\/h3\u003e\n\u003cp\u003ePot life is temperature-dependent. Work in manageable batch sizes, especially in warm conditions. Refer to the current TDS for specific pot life and working time at different temperatures.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:12px 16px;margin:16px 0;border-radius:4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Concrete Coatings \u0026amp; Industrial Flooring Specialist, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size:0.85em;color:#777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Sherwin-Williams","offers":[{"title":"3 gallon kit","offer_id":40081334632627,"sku":"","price":300.0,"currency_code":"CAD","in_stock":true},{"title":"15 gallon kit","offer_id":40081334665395,"sku":"","price":1450.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/eco-mpe-multi-purpose-epoxy-4843055.jpg?v=1776710892","url":"https:\/\/www.canopussupply.com\/products\/eco-mpe-multi-purpose-epoxy","provider":"Canopus Supply Inc","version":"1.0","type":"link"}