{"product_id":"resintech-core-bond-epoxy-cbe-15l-4-gals","title":"ResinTech Core Bond Epoxy (CBE) 15 L \/ 4 Gal","description":"\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:6px;padding:12px 16px;margin:0 0 18px 0;\"\u003e\n  \u003cp style=\"margin:0;font-size:1.02em;color:#1C4F8A;\"\u003e\u003cstrong\u003e✅ Usually In Stock — North Vancouver, BC.\u003c\/strong\u003e Call 250-233-3000 to confirm availability or arrange pickup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eResinTech Core Bond Epoxy (CBE) — High-Bond 100% Solids Epoxy\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eTwo-Component, 100% Solids High-Bond Epoxy — Primer, Bond Coat, Wear Coat, Broadcast Binder \u0026amp; Mortar Binder\u003c\/strong\u003e | Brand: ResinTech | 15 L kit\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eResinTech CBE is a low-odour, two-component, 100% solids epoxy that wets into properly prepared concrete to create a strong bond for ResinTech flooring, coating and repair assemblies. It is the preferred ResinTech epoxy where adhesion, concrete consolidation and reinforced broadcast build matter more than UV stability or flexibility — the standard reinforcement \/ broadcast-binder layer in ResinTech traffic systems. Confirm system compatibility, film build, recoat windows and topcoat requirements against the current ResinTech TDS, SDS and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eA ResinTech alternative to Tremco Vulkem 191 QD Primer \u0026amp; Tremco Epoxy Primer\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color:#444;\"\u003eResinTech CBE Core Bond Epoxy is stocked in North Vancouver and used in the same epoxy primer, bond-coat and adhesion-promoter applications. Product chemistry and system build differ between manufacturers — confirm suitability against the current ResinTech TDS before substituting. \u003cem style=\"color:#777;\"\u003eVulkem and Tremco are registered trademarks of Tremco. Used for identification and comparison only; no affiliation or endorsement implied.\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:0 0 18px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eField\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eResinTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eProduct Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eCBE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eTwo-component, 100% solids high-bond epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eKit \/ Pack Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e15 L kit — Part A 10 L + Part B 5 L (4.0 US gal mixed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eColour \/ Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eClear to slightly amber; field-pigmented when approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eHigh-bond primer \/ bond coat \/ wear coat \/ broadcast binder \/ mortar binder — the standard reinforcement layer in ResinTech systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eWhere CBE sits in the system:\u003c\/strong\u003e CBE is the high-bond epoxy used as a primer, bond coat, broadcast binder and reinforced wear layer in ResinTech traffic coating systems (PTS \/ VTS \/ EWS). Where UV exposure, chemical service or a decorative finish is required, protect CBE with an \u003ca href=\"\/fr\/products\/high-performance-polyaspartic-hpp\" style=\"color:#1C4F8A;\"\u003eHPP\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/resintech-chemical-resistant-urethane-cru\" style=\"color:#1C4F8A;\"\u003eCRU\u003c\/a\u003e topcoat. Where a premium or UV-resistant epoxy build layer is preferred, \u003ca href=\"\/fr\/products\/transparent-universal-epoxy-100-solids-tue\" style=\"color:#1C4F8A;\"\u003eResinTech TUE\u003c\/a\u003e may be substituted for CBE. Confirm the system build against the current ResinTech system specification.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eBest-Use Applications\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eConfirm all applications against the current ResinTech TDS before specifying.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConcrete primer under epoxy, polyaspartic and urethane systems\u003c\/li\u003e\n  \u003cli\u003eBond coat for overlays, toppings, patch repairs and cove bases\u003c\/li\u003e\n  \u003cli\u003eInterior wear coat where UV exposure is limited\u003c\/li\u003e\n  \u003cli\u003eBroadcast receiver for silica sand, quartz and decorative flake systems\u003c\/li\u003e\n  \u003cli\u003eEpoxy mortar binder for patching, ramps, coves and floor detailing\u003c\/li\u003e\n  \u003cli\u003eHigh-bond base resin for parkade, warehouse and service-area assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eProduct Data\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eSource: ResinTech CBE Technical Data Sheet (TDS-CBE-1.0). Typical values at 23 °C and 50% RH unless noted. Confirm against the current TDS before specifying or ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:28%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eNote\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eComponents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eTwo — Part A resin + Part B hardener\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eMix full kits where possible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eMix Ratio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e2:1 by volume (Part A : Part B)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSolids Content\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e100% by weight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D1353\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u0026lt; 50 g\/L\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eEffectively VOC-free for a 100% solids epoxy — confirm against SDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eClear to slightly amber\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eMay be pigmented where approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eDensity (mixed)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e9.2–9.6 lb\/US gal\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D1475\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eOdour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eLow\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eUse ventilation during application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eInduction Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eNone\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eApply immediately after proper mixing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eWater Absorption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e≤ 0.3%\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D570\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eShelf Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e12 months\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eUnopened; store sealed at 5–30 °C, protect from freezing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003ePerformance Properties\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eTypical values from the ResinTech CBE TDS. Actual results depend on substrate, preparation, mixing, film build and conditions — confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:32%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTest Method \/ Note\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eBond Strength to Concrete\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e420 psi\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D4541; highest-bond material in the ResinTech line (typically concrete cohesive failure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eTensile Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e5,100 psi\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D412 \/ D638\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eElongation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e8%\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eRigid epoxy; not a crack-bridging membrane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eAbrasion Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e50 mg loss\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D4060, CS-17 wheel, 1000 g, 1000 cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eShore Hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e80 D\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D2240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eTack-Free Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e6 hours\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D1640 at 15 mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eDrying Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e8 hours at 15 mils\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D1640, 24 °C \/ 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eUV Stability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eLimited\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eUse HPP or CRU topcoat for UV exposure, or choose TUE for a UV-resistant epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eModerate\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eUse CRU topcoat for stronger chemical service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eWorking Time, Recoat \u0026amp; Cure\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eTimes vary with temperature, film build and conditions. Cold slabs slow cure; hot conditions shorten pot life. Confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTemp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003ePot Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eMin Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eMax Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eFoot Traffic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eFull Cure\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003e10 °C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e50–60 min\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e18–24 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e36–48 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e48–72 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e~10 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003e20 °C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e35–40 min\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10–18 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e24 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e~24 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e~7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003e30 °C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e15–20 min\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e6–10 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e24 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e12–18 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e4–5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"color:#555;font-size:0.9em;\"\u003eIf the maximum recoat window is exceeded, abrade to remove gloss, vacuum thoroughly and clean before recoating.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eCoverage \u0026amp; Film Build\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003ePer US gallon (15 L kit ≈ 4.0 US gal). Actual coverage varies with profile, porosity, film build and method — confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eUse\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Film \/ Build\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003ePrimer \/ Base Coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e6–10 mils\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e240–160 ft²\/US gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eBond Coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eThin continuous film\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e405–245 ft²\/US gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eWear Coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10–20 mils\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e160–80 ft²\/US gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eBroadcast Receiver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10–20 mils before broadcast\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e145–100 ft²\/US gal plus aggregate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eMortar \/ Cove Binder\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eFilled with clean dry aggregate\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eVaries with aggregate ratio and detail size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eApplication Conditions\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eConfirm all conditions against the current ResinTech TDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:40%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eCondition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eRequirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSubstrate Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10–30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eAmbient Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10–32 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eRelative Humidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eMaximum 85% recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eDew Point\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eSubstrate at least 3 °C above dew point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eConcrete Moisture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eDry concrete; typical screening limit 4% Tramex or 85% RH by ASTM F2170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eConcrete Age\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eNormally 28 days unless the designer approves earlier work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eMinimum Concrete Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e3,600 psi compressive and 220 psi tensile pull-off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eApplication Notes\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eAlways confirm application requirements against the current TDS, SDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eSurface Preparation\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cp\u003eConcrete must be sound, clean, dry and free of laitance, curing compounds, sealers, oil, grease and bond breakers. Mechanically prepare to ICRI CSP 2–3 for primer\/basecoat use and CSP 3–4 for broadcast, wear coat or vehicular-duty use. Shot blast, grind or scarify as needed; vacuum until dust is removed from pores and profile. Repair cracks, joints, spalls and edges before application. Test existing coatings for adhesion and compatibility; remove unsound or unknown coatings. Do not apply to wet concrete, active water intrusion or condensation — CBE is not a moisture-mitigation system. Confirm against the current TDS.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eMixing\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cp\u003eCondition materials to application temperature before use. Pre-mix Part A; add pigment to Part A first when a pigmented coat is required. Add Part B at 2:1 by volume and mix mechanically for 3–4 minutes at low speed. Scrape sides and bottom of the pail and avoid whipping air into the material. Do not thin with solvents. Do not hand-mix partial kits unless accurately measured. For mortar, add clean dry aggregate only after Part A and Part B are fully mixed. Confirm against the current TDS.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eApplication \u0026amp; Broadcast\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cp\u003ePrime \/ coat by squeegee, roller or brush; backroll to a continuous film and eliminate puddles. For broadcast, cast silica sand, quartz or flake into the wet CBE at the specified rate and remove all loose aggregate after cure. For mortar and coves, blend mixed CBE with clean dry aggregate to the selected consistency and finish while workable. Check wet film thickness; excessive thickness can increase heat, blush or cure inconsistency. Confirm against the current TDS.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eLimitations\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cul style=\"margin:0;\"\u003e\n    \u003cli\u003eNot UV stable as a final exposed exterior coating — yellowing\/chalking may occur. Use an HPP or CRU topcoat for UV-exposed service, or specify TUE where a UV-resistant epoxy is needed.\u003c\/li\u003e\n    \u003cli\u003eNot flexible and not intended to bridge dynamic cracks, moving joints or structural movement.\u003c\/li\u003e\n    \u003cli\u003eNot a standalone waterproofing membrane or moisture-vapour mitigation system.\u003c\/li\u003e\n    \u003cli\u003eDo not apply to wet, frozen, contaminated or dusty substrates.\u003c\/li\u003e\n    \u003cli\u003eAvoid thick unfilled pours or puddles due to exotherm and cure inconsistency.\u003c\/li\u003e\n    \u003cli\u003eColour and gloss can vary with film thickness, temperature, substrate absorption and pigmenting method.\u003c\/li\u003e\n  \u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eTechnical Documentation\u003c\/strong\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003eRequest the current ResinTech CBE Technical Data Sheet (TDS) and Safety Data Sheets (SDS) from Canopus Supply before specifying or ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003chr\u003e\n\n\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:4px;padding:16px 20px;margin:20px 0;\"\u003e\n  \u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eTrade Purchasing Note\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 10px 0;\"\u003eAll sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.9em;color:#555;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eOrder Enquiries \u0026amp; Volume Orders\u003c\/strong\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003eFor volume orders, system compatibility questions, pickup timing or delivery across BC, contact Canopus Supply before placing a bulk order.\u003c\/p\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003e\u003cstrong\u003eCall:\u003c\/strong\u003e 1 (250) 233-3000\u003cbr\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e \u003ca href=\"mailto:order@canopussupply.com\"\u003eorder@canopussupply.com\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003ePickup:\u003c\/strong\u003e Unit 103, 185 Forester Street, North Vancouver, BC\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorised ResinTech Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e","brand":"ResinTech","offers":[{"title":"CBE (15 L\/4 Gals)","offer_id":47054968979676,"sku":null,"price":310.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/resintech-core-bond-epoxy-cbe-15-l-4-gal-4661406.png?v=1782029106","url":"https:\/\/www.canopussupply.com\/fr\/products\/resintech-core-bond-epoxy-cbe-15l-4-gals","provider":"Canopus Supply Inc","version":"1.0","type":"link"}