{"title":"Produits d'imperméabilisation","description":"\u003ch2\u003eWaterproofing Membranes \u0026amp; Systems for Concrete Structures\u003c\/h2\u003e\n\u003cp\u003eProtecting concrete structures from water infiltration is a critical factor in long-term structural performance. Canopus Supply stocks professional waterproofing membranes, coatings, and system components from manufacturers including Tremco and ResinTech — formulated for parkades, rooftop decks, balconies, and below-grade structures across British Columbia.\u003c\/p\u003e\n\u003cp\u003eSystem selection, substrate preparation, and installation method significantly affect performance. Confirm product suitability against the current TDS, SDS, and project specification before ordering.\u003c\/p\u003e\n\u003ch3\u003eSystem Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluid-Applied Membranes\u003c\/strong\u003e — Polyurethane and elastomeric membranes applied as a continuous, crack-bridging layer over concrete substrates; performance depends on substrate condition, preparation, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClimate Considerations\u003c\/strong\u003e — Flexible systems formulated for use in BC's freeze-thaw and high-rainfall environments; confirm temperature and humidity requirements against the TDS before application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Components\u003c\/strong\u003e — Primer, membrane, and topcoat components available; confirm full system compatibility and manufacturer documentation requirements before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTraffic-Bearing Options\u003c\/strong\u003e — Vehicular-rated systems available for parkade decks and ramps; confirm load ratings and application requirements against the TDS and project specification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAbove-grade and below-grade parkade decks\u003c\/li\u003e\n\u003cli\u003eRooftop decks, terraces, and plaza decks\u003c\/li\u003e\n\u003cli\u003eBalconies and exposed concrete slabs\u003c\/li\u003e\n\u003cli\u003ePodium slabs and transfer structures\u003c\/li\u003e\n\u003cli\u003eMechanical room floors and wet areas\u003c\/li\u003e\n\u003cli\u003eBelow-grade walls and foundation waterproofing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSystem Specification Support\u003c\/h3\u003e\n\u003cp\u003eWaterproofing system selection depends on substrate condition, exposure, traffic type, and project specifications. Contact Canopus Supply for product information and technical data sheets before ordering.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;color:#14263F;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;color:#14263F;\"\u003e\n\u003cstrong\u003eTechnical Disclaimer:\u003c\/strong\u003e Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003eCanopus Supply Inc. — Industrial Coatings \u0026amp; Waterproofing Specialists, Metro Vancouver \u0026amp; BC\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2 style=\"margin-top: 2em;\"\u003eContractor FAQ — Waterproofing Products\u003c\/h2\u003e\n\u003ch3\u003eWhat types of waterproofing membranes does Canopus Supply stock?\u003c\/h3\u003e\n\u003cp\u003eCanopus Supply stocks fluid-applied polyurethane and elastomeric waterproofing membranes from manufacturers including Tremco and ResinTech. Products are suited for parkade decks, rooftop decks, balconies, below-grade walls, and exposed concrete structures. Confirm product suitability against the current TDS, SDS, and project specification before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between a traffic-bearing and non-traffic-bearing waterproofing membrane?\u003c\/h3\u003e\n\u003cp\u003eTraffic-bearing membranes are formulated and tested for vehicular or pedestrian load, typically used on parkade decks and ramps. Non-traffic-bearing membranes are suited for protected or non-trafficked surfaces such as below-grade walls, plaza decks under pavers, or rooftop areas. Confirm load ratings and application requirements against the current TDS and project specification before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes the waterproofing system require a primer?\u003c\/h3\u003e\n\u003cp\u003eMost fluid-applied waterproofing systems require a compatible primer to promote adhesion to the concrete substrate. Primer requirements vary by product and substrate condition. Confirm primer selection and application requirements against the current manufacturer documentation before ordering.\u003c\/p\u003e\n\u003ch3\u003eAre these products suitable for BC's climate?\u003c\/h3\u003e\n\u003cp\u003eProducts stocked by Canopus Supply include systems formulated for use in freeze-thaw and high-rainfall environments. Application temperature and humidity windows vary by product. Confirm suitability for specific site conditions against the current TDS before scheduling installation.\u003c\/p\u003e\n\u003ch3\u003eCan contractors pick up waterproofing products in North Vancouver?\u003c\/h3\u003e\n\u003cp\u003eContractor pickup is available from Canopus Supply in North Vancouver. Contact the store before placing volume orders to confirm stock, pickup timing and system components.\u003c\/p\u003e","products":[{"product_id":"tremco-vulkem-350nf","title":"Tremco Vulkem 350NF Base Coat – Single-Component Urethane Waterproofing Membrane","description":"\u003cdiv style=\"margin:0 0 18px 0;\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/TDS-Tremco-CPG-APAC-VULKEM-350NF.pdf?v=1725067068\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#1C4F8A;color:#fff;padding:10px 20px;border-radius:4px;text-decoration:none;font-weight:600;margin:6px 8px 6px 0;\"\u003e⬇ Download TDS (PDF)\u003c\/a\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTremco Vulkem® 350NF | Single-Component Urethane Waterproofing Base Coat\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eSingle-Component Low-Odour Low-VOC Urethane Waterproofing Membrane — Roller \u0026amp; Self-Leveling Grades\u003c\/strong\u003e | Brand: Tremco\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eVulkem® 350NF Base Coat is a single-component, low-odour, low-VOC \u003ca href=\"\/fr\/collections\/waterproofing-products\" title=\"Waterproofing Products\" style=\"color:#1C4F8A;\"\u003ewaterproofing membrane\u003c\/a\u003e designed to bond to clean, dry concrete, plywood, and metal substrates. It is formulated to retain integrity over hairline cracks up to 1.5 mm. If cut or damaged, Vulkem 350NF is designed to resist water migration between it and the substrate. Available in Roller (R) and Self-Leveling (SL) grades. Confirm suitability against the current TDS, SDS, and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eProfessional system note:\u003c\/strong\u003e Vulkem 350NF is the \u003cstrong\u003ebase coat \/ primary waterproofing layer\u003c\/strong\u003e in Tremco traffic deck systems. It must be topcoated with Vulkem 950NF or another approved Tremco wearing course. \u003cstrong\u003eDo not use as a standalone finish coat.\u003c\/strong\u003e Confirm the full system specification before use.\u003c\/div\u003e\n\u003cdiv style=\"border: 1px dashed #1C4F8A; background: #f4f8fc; padding: 14px 18px; margin: 18px 0; border-radius: 6px;\"\u003e\n\u003cspan style=\"display:inline-block; font-size:0.75em; font-weight:700; letter-spacing:0.5px; color:#1C4F8A; text-transform:uppercase; margin-bottom:6px;\"\u003eAlso available — ResinTech alternative\u003c\/span\u003e\n\u003cp style=\"margin:0; color:#444;\"\u003ePrefer a locally stocked alternative? \u003ca href=\"\/fr\/products\/resintech-flexcoat-pu-polyurethane-waterproofing-membrane\" style=\"color:#1C4F8A; font-weight:600;\"\u003eResinTech FLEXCOAT-PU\u003c\/a\u003e is a single-component elastomeric polyurethane waterproofing \u0026amp; crack-bridging base membrane, stocked in North Vancouver and used in the same single-component base-coat \/ traffic-deck waterproofing applications. Product chemistry and system build differ between manufacturers — confirm suitability against the current ResinTech TDS before substituting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eComponents\u003c\/strong\u003e\u003cbr\u003eSingle-component\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eVOC\u003c\/strong\u003e\u003cbr\u003eLow VOC, low odour\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eCrack Bridging\u003c\/strong\u003e\u003cbr\u003eUp to 1.5 mm hairline cracks — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eGrades\u003c\/strong\u003e\u003cbr\u003eRoller (R) \u0026amp; Self-Leveling (SL)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eSubstrates\u003c\/strong\u003e\u003cbr\u003eConcrete, plywood, metal — confirm prep requirements against TDS\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003cbr\u003eBase coat \/ waterproofing layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Odour \u0026amp; Low VOC:\u003c\/strong\u003e Formulated for use in enclosed parkades and occupied structures with appropriate ventilation; confirm ventilation requirements against the SDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrack Bridging:\u003c\/strong\u003e Designed to retain integrity over hairline cracks up to 1.5 mm; confirm limitations for larger cracks or structural movement against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Migration Resistance:\u003c\/strong\u003e Formulated to resist water migration between membrane and substrate if cut or damaged; confirm performance requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Component:\u003c\/strong\u003e No mixing required — apply directly from the pail; confirm application temperature and humidity requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Grades:\u003c\/strong\u003e Roller grade for vertical and sloped surfaces; Self-Leveling grade for horizontal applications — confirm grade selection against project requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Substrates:\u003c\/strong\u003e Designed for concrete, plywood, and metal; confirm substrate preparation requirements against the TDS before application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePedestrian deck waterproofing base coat\u003c\/li\u003e\n\u003cli\u003eCar park and parkade deck waterproofing\u003c\/li\u003e\n\u003cli\u003eRooftop and podium deck waterproofing\u003c\/li\u003e\n\u003cli\u003eUnder-tile waterproofing systems\u003c\/li\u003e\n\u003cli\u003eInterior waterproofing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eDownloads\u003c\/h2\u003e\n\u003cp style=\"color:#444;\"\u003eDownload the current Technical Data Sheet (TDS) using the button at the top of this page.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eHealth \u0026amp; Safety\u003c\/h2\u003e\n\u003cp\u003eRead the current Safety Data Sheet (SDS) before use. Contains isocyanate components — wear gloves, eye protection, and ensure adequate ventilation during application. Refer to the SDS for full hazard classification and first-aid measures.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between Vulkem 350NF Roller and Self-Leveling grades?\u003c\/h3\u003e\n\u003cp\u003eThe Roller (R) grade is formulated for application by roller on vertical, sloped, or horizontal surfaces. The Self-Leveling (SL) grade flows to a flat, uniform surface on horizontal applications with minimal tooling. Select the grade based on surface orientation and project requirements, and confirm against the current TDS.\u003c\/p\u003e\n\u003ch3\u003eCan Vulkem 350NF bridge cracks in the concrete substrate?\u003c\/h3\u003e\n\u003cp\u003eVulkem 350NF is formulated to retain integrity over hairline cracks up to 1.5 mm. For larger cracks or structural movement, consult the current Tremco TDS and project specification for the appropriate system approach.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eComplete the Tremco Traffic Deck System\u003c\/h2\u003e\n\u003cp style=\"color: #444;\"\u003eVulkem 350NF is the base coat in a multi-component system. Confirm the full system specification and application sequence against current Tremco documentation before ordering.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit,minmax(200px,1fr)); gap: 14px; margin: 16px 0;\"\u003e\n\u003cdiv style=\"background: #eef4fa; border-radius: 6px; padding: 16px; border-top: 3px solid #1C4F8A;\"\u003e\n\u003cstrong style=\"color: #1c4f8a; display: block; margin-bottom: 6px;\"\u003eStep 1 — Primer\u003c\/strong\u003e \u003cspan style=\"color: #444; font-size: 0.95em;\"\u003eTremco Epoxy Primer — two-component tie-in primer for concrete and transition zones.\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"\/fr\/products\/tremco-epoxy-primer\" style=\"color: #1c4f8a; font-size: 0.9em; font-weight: bold;\"\u003eView Product →\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #eef4fa; border-radius: 6px; padding: 16px; border-top: 3px solid #1C4F8A;\"\u003e\n\u003cstrong style=\"color: #1c4f8a; display: block; margin-bottom: 6px;\"\u003eStep 2 — Base Coat (this product)\u003c\/strong\u003e \u003cspan style=\"color: #444; font-size: 0.95em;\"\u003eVulkem 350NF — single-component urethane waterproofing membrane.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #eef4fa; border-radius: 6px; padding: 16px; border-top: 3px solid #1C4F8A;\"\u003e\n\u003cstrong style=\"color: #1c4f8a; display: block; margin-bottom: 6px;\"\u003eStep 3 — Top Coat\u003c\/strong\u003e \u003cspan style=\"color: #444; font-size: 0.95em;\"\u003eVulkem 950NF — two-component polyurethane wearing course for traffic deck durability.\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"\/fr\/products\/tremco-vulkem-950nf\" style=\"color: #1c4f8a; font-size: 0.9em; font-weight: bold;\"\u003eView Product →\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1C4F8A;\"\u003eRelated systems at Canopus Supply:\u003c\/strong\u003e\u003cbr\u003e\nBrowse \u003ca href=\"\/fr\/collections\/traffic-deck-coatings\" style=\"color:#1C4F8A;\"\u003etraffic coating systems\u003c\/a\u003e, \u003ca href=\"\/fr\/collections\/waterproofing-products\" style=\"color:#1C4F8A;\"\u003ewaterproofing membranes\u003c\/a\u003e, and \u003ca href=\"\/fr\/collections\/concrete-sealers\" style=\"color:#1C4F8A;\"\u003econstruction sealants\u003c\/a\u003e for related products and system components.\n\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 18px; margin: 16px 0; border-radius: 4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 18px; margin: 16px 0; border-radius: 4px;\"\u003e\u003cspan style=\"color: #444;\"\u003eNeed help specifying the full system? \u003ca href=\"\/fr\/pages\/contact-us\" style=\"color: #1c4f8a; font-weight: bold;\"\u003eContact Canopus Supply\u003c\/a\u003e — \u003ca href=\"tel:2502333000\" style=\"color: #1c4f8a;\"\u003e250-233-3000\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eTremco\u003c\/strong\u003e — Professional Waterproofing \u0026amp; Traffic Deck Systems\u003c\/p\u003e\n\u003cp style=\"font-size: 0.85em; color: #777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAvailable at Canopus Supply — North Vancouver, BC. Authorized distributor in British Columbia.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Tremco","offers":[{"title":"Roller (R) Grade","offer_id":40165367120051,"sku":"","price":290.0,"currency_code":"CAD","in_stock":true},{"title":"Self-Levelling (SL) Grade","offer_id":40165367152819,"sku":"","price":290.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/tremco-vulkem-350nf-base-coat-single-component-urethane-waterproofing-membrane-8367922.png?v=1783120872"},{"product_id":"tremco-vulkem-191-qd-primer","title":"Vulkem 191 QD Primer","description":"\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTremco Vulkem® 191 QD Primer\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eQuick-Dry, Single-Component Urethane Primer for Traffic Deck Systems\u003c\/strong\u003e | Brand: Tremco\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eTremco Vulkem® 191 QD is a quick-drying, single-component urethane primer for use under Vulkem \u003ca href=\"\/fr\/collections\/traffic-deck-coatings\" title=\"Traffic Deck Coatings\"\u003etraffic deck\u003c\/a\u003e and \u003ca href=\"\/fr\/collections\/waterproofing-products\" title=\"Waterproofing Products\"\u003ewaterproofing membrane\u003c\/a\u003e systems. Applied to properly prepared concrete and metal substrates, it is designed to improve adhesion of the Vulkem base coat and help reduce outgassing that can cause pinholes or adhesion issues in the membrane. Confirm suitability, primer requirements, coverage, and recoat windows against the current Tremco TDS, SDS, and system specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eProfessional system note:\u003c\/strong\u003e Vulkem 191 QD must be used as part of an approved Tremco traffic deck or waterproofing system. \u003cstrong\u003eDo not apply the Vulkem base coat before the primer has fully dried\u003c\/strong\u003e to the specified tack-free state. Confirm primer requirements and recoat windows with the current Tremco system specification.\u003c\/div\u003e\n\u003cdiv style=\"border: 1px dashed #1C4F8A; background: #f4f8fc; padding: 14px 18px; margin: 18px 0; border-radius: 6px;\"\u003e\n\u003cspan style=\"display:inline-block; font-size:0.75em; font-weight:700; letter-spacing:0.5px; color:#1C4F8A; text-transform:uppercase; margin-bottom:6px;\"\u003eAlso available — ResinTech alternative\u003c\/span\u003e\n\u003cp style=\"margin:0; color:#444;\"\u003ePrefer a locally stocked alternative? \u003ca href=\"\/fr\/products\/resintech-core-bond-epoxy-cbe-15l-4-gals\" style=\"color:#1C4F8A; font-weight:600;\"\u003eResinTech CBE Core Bond Epoxy\u003c\/a\u003e is a high-bond 100%-solids epoxy primer and bond \/ build coat, stocked in North Vancouver and used in the same primer, bond-coat and adhesion-promoter applications. Product chemistry and system build differ between manufacturers — confirm suitability against the current ResinTech TDS before substituting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eVulkem 191 QD is formulated for accelerated dry times compared to standard Vulkem primers, allowing the Vulkem base coat to be applied sooner and helping to reduce overall system installation time; confirm dry times against the current TDS as they vary with temperature and humidity. Its single-component formulation requires no mixing. The QD (Quick Dry) designation indicates an accelerated dry time compared to standard Vulkem primers; confirm performance against the TDS for your specific site conditions.\u003c\/p\u003e\n\u003cp\u003eThe primer is designed to penetrate and seal the concrete surface, improving the bonding interface between the substrate and the Vulkem urethane membrane. On metal substrates, it provides a compatible bonding interface for the Vulkem system. Proper substrate preparation and primer application are critical to the long-term performance of the complete traffic deck system.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-dry formulation\u003c\/strong\u003e — accelerated tack-free time compared to standard primers; confirm dry times against the TDS as they vary with temperature and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component\u003c\/strong\u003e — no mixing required; apply directly from the container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned to improve adhesion\u003c\/strong\u003e — formulated to improve the bond between concrete or metal substrate and the Vulkem urethane membrane; final adhesion depends on substrate condition, preparation, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned to reduce outgassing\u003c\/strong\u003e — formulated to help reduce outgassing and pinholing in the applied membrane; confirm requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem-compatible\u003c\/strong\u003e — designed for use with Vulkem 350NF, 360NF, and other approved Tremco traffic deck and waterproofing systems; confirm system compatibility against the current Tremco specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcrete and metal substrates\u003c\/strong\u003e — confirm substrate preparation requirements against the TDS before application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrimer for Vulkem 350NF \/ 360NF traffic deck systems on concrete\u003c\/li\u003e\n\u003cli\u003ePrimer for Vulkem waterproofing membrane systems on concrete and metal\u003c\/li\u003e\n\u003cli\u003eParkade and parking structure deck primer coat\u003c\/li\u003e\n\u003cli\u003ePodium and pedestrian deck substrate preparation\u003c\/li\u003e\n\u003cli\u003eMetal substrate priming for Vulkem system compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e\u003cbr\u003eSingle-component urethane\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eDry Time\u003c\/strong\u003e\u003cbr\u003eQuick-dry (QD) — confirm against TDS\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eSubstrates\u003c\/strong\u003e\u003cbr\u003eConcrete and metal — confirm prep requirements against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003eRoller or brush\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003cbr\u003ePrimer \/ adhesion promoter\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eCompatible Systems\u003c\/strong\u003e\u003cbr\u003eVulkem 350NF, 360NF, and approved Tremco systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eConcrete must be mechanically profiled (shot-blasted or ground), clean, dry, and free of laitance, oil, grease, curing compounds, and incompatible coatings. Metal must be clean, dry, and free of rust, mill scale, and oil. Conduct moisture testing on concrete before application. Refer to the current Tremco system specification for substrate-specific preparation requirements and acceptable moisture levels.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eApplication Instructions\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e Prepare the substrate as described above. Confirm moisture levels are within acceptable limits per the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Apply Vulkem 191 QD by roller or brush at the coverage rate specified in the TDS. Ensure uniform, thin coverage across the entire substrate area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry time:\u003c\/strong\u003e Allow the primer to dry to the specified tack-free state before applying the Vulkem base coat. Do not apply the base coat before the primer is fully dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat window:\u003c\/strong\u003e Apply the Vulkem base coat within the recoat window specified in the TDS. Do not exceed the maximum recoat time without re-priming.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMust be used as part of an approved Tremco system — not a standalone waterproofing product.\u003c\/li\u003e\n\u003cli\u003eDo not apply to damp, contaminated, or unsound substrates.\u003c\/li\u003e\n\u003cli\u003eDo not apply below minimum temperature or when condensation or rain is expected before cure; confirm temperature requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003eDo not apply the base coat before the primer has reached the specified tack-free state.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recoat window without re-priming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eStorage \u0026amp; Shelf Life\u003c\/h2\u003e\n\u003cp\u003eStore in original, unopened containers in a cool, dry, ventilated area away from direct sunlight, heat, and moisture. Confirm shelf life and storage conditions against the product label and current SDS.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eHealth \u0026amp; Safety\u003c\/h2\u003e\n\u003cp\u003eRead the current Safety Data Sheet (SDS) before use. Contains isocyanate and solvent components — wear gloves, eye protection, and ensure adequate ventilation. Refer to the SDS for full hazard classification and first-aid measures.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between Vulkem 191 QD and standard Vulkem primers?\u003c\/h3\u003e\n\u003cp\u003eThe QD designation indicates a quick-dry formulation with an accelerated tack-free time compared to standard Vulkem primers. Confirm dry times against the current TDS for your specific site conditions.\u003c\/p\u003e\n\u003ch3\u003eIs Vulkem 191 QD required for all Vulkem systems?\u003c\/h3\u003e\n\u003cp\u003ePrimer requirements vary by system and substrate. Refer to the current Tremco system specification for your specific application to confirm whether Vulkem 191 QD or another primer is required. Contact Canopus Supply for guidance.\u003c\/p\u003e\n\u003ch3\u003eCan it be used on metal substrates?\u003c\/h3\u003e\n\u003cp\u003eVulkem 191 QD is designed for use on metal substrates as part of an approved Tremco system. Ensure the metal is clean, dry, and free of rust, mill scale, and oil before application. Confirm suitability against the current TDS.\u003c\/p\u003e\n\u003ch3\u003eWhat is the recoat window after applying the primer?\u003c\/h3\u003e\n\u003cp\u003eThe recoat window is temperature and humidity dependent. Refer to the current Tremco TDS for specific tack-free times and maximum recoat windows. Do not exceed the maximum recoat time without re-priming.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorized Tremco Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size: 0.85em; color: #777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Tremco","offers":[{"title":"Default Title","offer_id":40119188357299,"sku":"","price":460.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/vulkem-191-qd-primer-2860110.jpg?v=1776710892"},{"product_id":"vulkem-360nf-base-coat","title":"Vulkem 360NF Base Coat - Low VOC, water-cured, rapid setting urethane membrane","description":"\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTremco Vulkem® 360NF Base Coat\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eLow-VOC, Water-Cured, Rapid-Setting Urethane Waterproofing Membrane\u003c\/strong\u003e | Brand: Tremco\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eTremco Vulkem® 360NF is a single-component, moisture-curing, rapid-setting \u003ca href=\"\/fr\/collections\/waterproofing-products\" title=\"Waterproofing Products\"\u003eurethane membrane\u003c\/a\u003e formulated as the base coat in Tremco’s Vulkem \u003ca href=\"\/fr\/collections\/traffic-deck-coatings\" title=\"Traffic Deck Coatings\"\u003etraffic deck\u003c\/a\u003e waterproofing system. Its low-VOC, solvent-free formulation is designed for use in enclosed parkades and occupied structures with appropriate ventilation. Confirm suitability, system compatibility, coverage, and cure requirements against the current Tremco TDS, SDS, and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eProfessional system note:\u003c\/strong\u003e Vulkem 360NF is the \u003cstrong\u003ebase coat\u003c\/strong\u003e in the Vulkem traffic deck system. It must be applied over an approved Tremco primer and topcoated with Vulkem 951NF or another approved Tremco wearing course. \u003cstrong\u003eDo not use as a standalone waterproofing membrane.\u003c\/strong\u003e Confirm the full system specification before use.\u003c\/div\u003e\n\u003cdiv style=\"border: 1px dashed #1C4F8A; background: #f4f8fc; padding: 14px 18px; margin: 18px 0; border-radius: 6px;\"\u003e\n\u003cspan style=\"display:inline-block; font-size:0.75em; font-weight:700; letter-spacing:0.5px; color:#1C4F8A; text-transform:uppercase; margin-bottom:6px;\"\u003eAlso available — ResinTech alternative\u003c\/span\u003e\n\u003cp style=\"margin:0; color:#444;\"\u003ePrefer a locally stocked alternative? \u003ca href=\"\/fr\/products\/resintech-flexcoat-pu-polyurethane-waterproofing-membrane\" style=\"color:#1C4F8A; font-weight:600;\"\u003eResinTech FLEXCOAT-PU\u003c\/a\u003e is a single-component elastomeric polyurethane waterproofing \u0026amp; crack-bridging base membrane, stocked in North Vancouver and used in the same base-coat \/ traffic-deck waterproofing applications. Product chemistry and system build differ between manufacturers — confirm suitability against the current ResinTech TDS before substituting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eVulkem 360NF cures by reaction with atmospheric moisture to form a seamless, fully-adhered elastomeric membrane. Its NF (No Flash) designation indicates a low-VOC, non-flammable formulation — designed for enclosed parkades and occupied buildings where solvent-based products present ventilation and fire safety challenges; confirm ventilation requirements against the SDS.\u003c\/p\u003e\n\u003cp\u003eThe rapid-setting formulation is designed to reduce the time between base coat application and topcoat installation, helping to compress the overall project schedule; confirm cure times against the current TDS as they vary with temperature and humidity. Once cured, Vulkem 360NF is designed to provide a flexible, crack-bridging base that accommodates minor substrate movement and thermal cycling; confirm crack-bridging performance against the TDS and project specification.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-VOC, non-flammable (NF)\u003cbr\u003e\u003c\/strong\u003eFormulated for enclosed parkades and occupied structures with appropriate ventilation; confirm ventilation requirements against the SDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid-Setting\u003cbr\u003e\u003c\/strong\u003eDesigned for faster cure than conventional urethane membranes; confirm cure times against the TDS as they vary with temperature and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component, moisture-curing\u003cbr\u003e\u003c\/strong\u003eNo mixing required; apply directly from the pail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, fully-adhered membrane\u003cbr\u003e\u003c\/strong\u003eDesigned to eliminate laps and seams; final performance depends on substrate condition, preparation, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrack-bridging elastomeric properties\u003cbr\u003e\u003c\/strong\u003eDesigned to accommodate minor substrate movement and thermal cycling; confirm crack-bridging performance against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTremco system compatible\u003cbr\u003e\u003c\/strong\u003eDesigned for use with Vulkem 191 QD Primer and Vulkem 951NF topcoat as part of a complete traffic deck assembly; confirm system compatibility against the current Tremco specification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBase coat membrane in Vulkem vehicular traffic deck waterproofing systems\u003c\/li\u003e\n\u003cli\u003eBase coat membrane in Vulkem pedestrian traffic deck waterproofing systems\u003c\/li\u003e\n\u003cli\u003eParkade and parking structure deck waterproofing\u003c\/li\u003e\n\u003cli\u003ePodium deck and plaza deck waterproofing base coat\u003c\/li\u003e\n\u003cli\u003eRamp and drive aisle waterproofing base coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e\u003cbr\u003eSingle-component polyurethane (urethane)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eCure Mechanism\u003c\/strong\u003e\u003cbr\u003eMoisture-curing, rapid-setting\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eVOC\u003c\/strong\u003e\u003cbr\u003eLow-VOC, non-flammable (NF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eMembrane Type\u003c\/strong\u003e\u003cbr\u003eFluid-applied, fully-adhered base coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003cbr\u003eBase coat \/ waterproofing layer\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eCompatible Topcoat\u003c\/strong\u003e\u003cbr\u003eVulkem 951NF (or approved equivalent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eConcrete must be structurally sound, clean, and free of laitance, oil, grease, curing compounds, and form release agents. Mechanically profile the surface to the CSP specified in the TDS. Fill surface voids, honeycombs, and bug holes with a compatible patching mortar. Apply Vulkem 191 QD Primer (or approved Tremco primer) at the specified coverage rate and allow to dry before applying Vulkem 360NF. Refer to the current Tremco system specification for full substrate preparation requirements.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eApplication Instructions\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e Prepare the concrete as described above. Apply approved primer and allow it to dry to the tack-free state specified in the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail work:\u003c\/strong\u003e Apply membrane to all coves, inside and outside corners, pipe penetrations, and construction joints before field application. Embed reinforcing fabric at all details as specified.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField application:\u003c\/strong\u003e Apply Vulkem 360NF by squeegee and back-roll at the wet film thickness specified in the TDS. Ensure uniform coverage with no holidays or thin spots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure:\u003c\/strong\u003e Allow to cure to the state specified in the TDS before applying the topcoat. Cure time is temperature and humidity dependent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcoat:\u003c\/strong\u003e Apply Vulkem 951NF (or approved topcoat) within the recoat window specified in the TDS.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMust be used as part of an approved Tremco Vulkem traffic deck system, not a standalone waterproofing membrane.\u003c\/li\u003e\n\u003cli\u003eDo not apply to substrates with active water leaks or running water.\u003c\/li\u003e\n\u003cli\u003eDo not apply below minimum temperature or when rain or condensation is expected before cure; confirm temperature requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recoat window without re-priming the surface.\u003c\/li\u003e\n\u003cli\u003ePot life and cure time are temperature and humidity-dependent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing, and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorized Tremco Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size: 0.85em; color: #777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tremco","offers":[{"title":"Default Title","offer_id":40165483839667,"sku":"","price":480.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/vulkem-360nf-base-coat-low-voc-water-cured-rapid-setting-urethane-membrane-7966327.png?v=1782292274"},{"product_id":"tremproof-250gc-waterproofing-membrane","title":"TREMproof® 250GC Single-Component, Rapid Curing, Fluid-Applied Elastomeric Waterproofing Membrane","description":"\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTremco TREMproof® 250GC | Single-Component Fluid-Applied Waterproofing Membrane\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eSingle-Component, Rapid-Curing, Fluid-Applied Elastomeric Waterproofing Membrane\u003c\/strong\u003e | Brand: Tremco\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eTremco TREMproof® 250GC is a single-component, moisture-curing, fluid-applied polyurethane \u003ca href=\"\/fr\/collections\/waterproofing-products\" title=\"Waterproofing Products\"\u003ewaterproofing membrane\u003c\/a\u003e designed for below-grade and plaza deck applications. Its rapid-cure, green concrete compatible (GC) formulation is designed for professional waterproofing contractors. Confirm suitability, coverage, cure time, and system compatibility against the current Tremco TDS, SDS, and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eProfessional system note:\u003c\/strong\u003e TREMproof 250GC must be applied as part of an approved Tremco waterproofing system including compatible primers, protection boards, and drainage composites where required. \u003cstrong\u003eDo not use as a standalone exposed membrane.\u003c\/strong\u003e Confirm the full system specification against the current Tremco TDS and project specification before use.\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component, moisture-curing\u003c\/strong\u003e — no mixing required; apply directly from the container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid-curing\u003c\/strong\u003e — designed for faster cure than conventional membranes; confirm cure times against the current TDS as they vary with temperature and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreen concrete compatible (GC)\u003c\/strong\u003e — designed for application to green concrete; confirm minimum concrete age and moisture requirements against the current TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, fully-adhered membrane\u003c\/strong\u003e — fluid-applied to form a continuous waterproofing layer; final performance depends on substrate condition, preparation, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrack-bridging elastomeric properties\u003c\/strong\u003e — designed to accommodate minor substrate movement; confirm crack-bridging performance against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatible\u003c\/strong\u003e — designed for use with Tremco protection boards and drainage composites; confirm system compatibility against the current Tremco specification before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBelow-grade foundation wall waterproofing\u003c\/li\u003e\n\u003cli\u003ePlaza deck and podium deck waterproofing\u003c\/li\u003e\n\u003cli\u003eSplit-slab and buried deck waterproofing\u003c\/li\u003e\n\u003cli\u003eGreen concrete substrate waterproofing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eConcrete must be structurally sound, clean, and free of laitance, oil, grease, curing compounds, and form release agents. Confirm minimum concrete age, surface profile, and moisture requirements against the current Tremco TDS. Apply approved primer where required by the system specification. Refer to the current Tremco system specification for full substrate preparation requirements.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMust be used as part of an approved Tremco waterproofing system — not a standalone exposed membrane.\u003c\/li\u003e\n\u003cli\u003eDo not apply to substrates with active water leaks or running water.\u003c\/li\u003e\n\u003cli\u003eDo not apply below minimum temperature or when rain or condensation is expected before cure; confirm temperature requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003eCure time is temperature and humidity dependent — confirm against the current TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorized Tremco Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size: 0.85em; color: #777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tremco","offers":[{"title":"Default Title","offer_id":40219287126195,"sku":"","price":390.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/tremproof-250gc-single-component-rapid-curing-fluid-applied-elastomeric-waterproofing-membrane-5776295.jpg?v=1776710830"},{"product_id":"b-tuff-921a-waterproofing-membrane","title":"B-TUFF® 921A | NSF-Approved Two-Component Polyurea Waterproofing Membrane 4.5 Gal Kit","description":"\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eB-TUFF® 921A | NSF-Approved Two-Component Polyurea Waterproofing Membrane\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eTwo-Component, Fast-Curing, NSF-61 Approved Liquid-Applied Polyurea Waterproofing Membrane\u003c\/strong\u003e | Brand: Poly-Tuff Systems International\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eB-TUFF 921A is a two-component, fast-curing, low-odour, NSF-61 approved, liquid-applied polyurea waterproofing membrane for potable water containment, tank liners, pond liners, and corrosion protection. Confirm suitability, coverage, cure time, and system compatibility against the current TDS, SDS, NSF-61 certification scope, and project specification before use.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eProfessional system note:\u003c\/strong\u003e NSF-61 approval applies to specific applications and conditions — confirm the certification scope against the current NSF-61 listing and project specification before specifying for potable water contact applications. Confirm the full system specification against the current TDS before use.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-component polyurea\u003c\/strong\u003e — requires accurate mixing and specialized spray equipment; confirm equipment requirements against the current TDS before use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-curing\u003c\/strong\u003e — designed for rapid return to service; confirm cure times against the current TDS as they vary with temperature and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNSF-61 approved\u003c\/strong\u003e — confirm the certification scope and applicable conditions against the current NSF-61 listing before specifying for potable water contact applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, liquid-applied membrane\u003c\/strong\u003e — designed to form a continuous barrier; final performance depends on substrate condition, preparation, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-substrate compatibility\u003c\/strong\u003e — designed for use on concrete, metal, steel, asphalt, glass, and wood; confirm substrate preparation requirements against the current TDS before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePotable water containment liners — confirm NSF-61 certification scope before specifying\u003c\/li\u003e\n\u003cli\u003eTank and pond liners\u003c\/li\u003e\n\u003cli\u003eCorrosion protection on metal and concrete\u003c\/li\u003e\n\u003cli\u003eSecondary containment liners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRequires specialized spray equipment — confirm equipment requirements against the current TDS before use.\u003c\/li\u003e\n\u003cli\u003eConfirm NSF-61 certification scope before specifying for potable water contact applications.\u003c\/li\u003e\n\u003cli\u003eConfirm substrate preparation requirements against the current TDS before use.\u003c\/li\u003e\n\u003cli\u003eCure time is temperature and humidity dependent — confirm against the current TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:12px 16px;margin:16px 0;border-radius:4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, NSF-61 certification scope, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Waterproofing \u0026amp; Protective Coatings, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size:0.85em;color:#777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Poly-Tuff Systems International","offers":[{"title":"Default Title","offer_id":40584968143027,"sku":"","price":590.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/b-tuff-921-a-two-component-fast-curing-low-odor-nsf-approved-liquid-applied-5542328.jpg?v=1776710828"},{"product_id":"b-tuff-308-heavy-duty-floor-coating-parking-and-walking-waterproofing-deck-membrane","title":"B-TUFF® 308 | Heavy-Duty Urethane-Elastomer Waterproofing Deck Membrane 4.5 Gal Kit","description":"\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eB-TUFF® 308 | Heavy-Duty Urethane-Elastomer Waterproofing Deck Membrane\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eTwo-Component, Fast-Setting, Solvent-Free Urethane-Elastomer Waterproofing Base Membrane\u003c\/strong\u003e | Brand: Poly-Tuff Systems International\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eB-TUFF 308 is a two-component, fast-setting, rapid-curing, solvent-free, flexible, high-solids urethane-elastomer base membrane for vehicular parking decks, parkades, podium waterproofing, and metal roofs. Confirm suitability, coverage, cure time, and system compatibility against the current TDS, SDS, and project specification before use.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eProfessional system note:\u003c\/strong\u003e B-TUFF 308 is a base membrane and must be used as part of a complete approved system including compatible primer and wearing course. Confirm the full system specification against the current TDS and project specification before use.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-component, fast-setting\u003c\/strong\u003e — requires accurate mixing; confirm pot life, cure times, and application requirements against the current TDS before use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-temperature application\u003c\/strong\u003e — designed for application at temperatures as low as -6.7°C (20°F); confirm minimum application temperature and substrate temperature requirements against the current TDS before use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-free, high-solids\u003c\/strong\u003e — confirm VOC content and ventilation requirements against the SDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible urethane-elastomer\u003c\/strong\u003e — designed to accommodate substrate movement; confirm crack-bridging and flexibility performance against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-substrate compatibility\u003c\/strong\u003e — designed for use on concrete, metal, and other substrates; confirm substrate preparation requirements against the current TDS before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicular parking deck and parkade waterproofing base membrane\u003c\/li\u003e\n\u003cli\u003ePodium and portico waterproofing\u003c\/li\u003e\n\u003cli\u003eMetal roof waterproofing\u003c\/li\u003e\n\u003cli\u003eExposed deck waterproofing base coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMust be used as part of a complete approved system — confirm system specification before use.\u003c\/li\u003e\n\u003cli\u003eConfirm minimum application temperature and substrate temperature requirements against the current TDS before use in cold conditions.\u003c\/li\u003e\n\u003cli\u003eCure time is temperature and humidity dependent — confirm against the current TDS.\u003c\/li\u003e\n\u003cli\u003eConfirm substrate preparation requirements against the current TDS before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:12px 16px;margin:16px 0;border-radius:4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Waterproofing \u0026amp; Protective Coatings, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size:0.85em;color:#777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Poly-Tuff Systems International","offers":[{"title":"Default Title","offer_id":40584990326963,"sku":"","price":570.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/b-tuff-308-heavy-duty-floor-coating-parking-and-walking-waterproofing-deck-membrane-45-gal-kit-2466524.jpg?v=1776709567"},{"product_id":"resintech-ppm-protective-polyurea-membrane","title":"ResinTech PPM Protective Polyurea Membrane","description":"\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:6px;padding:12px 16px;margin:0 0 18px 0;\"\u003e\u003cp style=\"margin:0;font-size:1.02em;color:#1C4F8A;\"\u003e\u003cstrong\u003e✅ Usually In Stock — North Vancouver, BC.\u003c\/strong\u003e Call 250-233-3000 to confirm availability or arrange pickup.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eResinTech PPM — Protective Polyurea Membrane\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSingle-Component, Moisture-Cured, UV-Stable Polyurea Waterproofing \u0026amp; Protective Membrane\u003c\/strong\u003e | Brand: ResinTech | Product code: PPM\u003c\/p\u003e\n\u003cp\u003eResinTech PPM is a premium single-component, moisture-cured polyurea that reacts with ambient humidity to form a continuous, seamless, pinhole-free elastomeric membrane. It builds a tough, highly flexible, UV-stable film with excellent adhesion to concrete and steel, and is applied by brush, roller, notched squeegee or airless spray on horizontal, vertical and inclined surfaces. PPM is used both as a stand-alone liquid-applied waterproofing membrane and as a UV-stable protective topcoat over ResinTech FLEXCOAT-PU and other ResinTech membranes within approved ResinTech assemblies — confirm the system build, film thickness, primer and topcoat requirements for each use against the current TDS and project specification.\u003c\/p\u003e\n\u003cp\u003eAs a true single-component polyurea, ResinTech PPM combines high elongation (typical 648% — see properties below), fast single-product application with no on-site proportioning, and UV-stable chemistry. Because it can be installed as a stand-alone waterproofing membrane and as a UV-stable, wear-resistant topcoat, it consolidates multiple products into one system — used in the same applications as, and as an alternative to, conventional liquid-applied polyurea and PU deck membranes such as Sikalastic TC 225 and Tremco 346. Product performance and system build differ between manufacturers; always confirm suitability against the current TDS and project specification before substituting any product.\u003c\/p\u003e\n\u003cp style=\"font-size:0.85em;color:#777;\"\u003e\u003cem\u003eSikalastic is a registered trademark of Sika; Tremco is a registered trademark of Tremco. Product names are used for identification and comparison only; no affiliation or endorsement is implied.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUV-stable protective topcoat over FLEXCOAT-PU on balconies, podiums and walkway decks\u003c\/li\u003e\n  \u003cli\u003eStand-alone single-coat waterproofing on planters, foundation walls and retaining walls\u003c\/li\u003e\n  \u003cli\u003eBelow-grade and buried-structure waterproofing\u003c\/li\u003e\n  \u003cli\u003eConcrete deck waterproofing and protection\u003c\/li\u003e\n  \u003cli\u003eParkade, ramp and mechanical-room floors\u003c\/li\u003e\n  \u003cli\u003eSwimming pool decks, tanks and containment areas\u003c\/li\u003e\n  \u003cli\u003eRoofing and waterproofing details\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor sustained pedestrian or vehicular traffic, finish with a compatible ResinTech wear topcoat.\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cem\u003eCanopus Supply does not design waterproofing, roofing, containment or occupied-space assemblies. Roofing, tank, containment, below-grade and occupied-space applications require project-specific approval from the manufacturer and a qualified project specifier before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eSubstrates \u0026amp; Surface Preparation\u003c\/h3\u003e\n\u003cp\u003eSubstrates must be structurally sound, clean, dry and free of bond-inhibiting contaminants. \u003cstrong\u003eConcrete:\u003c\/strong\u003e minimum 28-day cure; mechanically profile to CSP 3 (ICRI). \u003cstrong\u003eSteel:\u003c\/strong\u003e abrasive-blast to near-white metal (SSPC-SP 10 \/ NACE No. 2). \u003cstrong\u003eCracks \u0026amp; joints:\u003c\/strong\u003e embed reinforcing fabric where movement is anticipated. \u003cstrong\u003ePriming:\u003c\/strong\u003e ResinTech CBE or TUE may be used to enhance adhesion. Keep the substrate at least 3 °C above the dew point during application and cure.\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eApplication \u0026amp; Curing\u003c\/h3\u003e\n\u003cp\u003eApply directly from the container by brush, roller, squeegee or airless spray — no proportioning required. Recommended dry film thickness (waterproofing): \u003cstrong\u003e47–59 mils\u003c\/strong\u003e (1.2–1.5 mm). Consumption: ~1.5–1.8 kg\/m². Coverage: ~2.0–2.5 m²\/L (≈80–100 ft²\/US gal) per coat, method- and thickness-dependent. Do not exceed the recommended single-coat film thickness (blistering risk). Clean tools with solvent before cure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCure (typical, 20 °C \/ 50% RH):\u003c\/strong\u003e tack-free 2–3 h; recoat window 16–24 h; through-dry ~9 h; full cure 24–48 h. Cure and recoat times lengthen at lower temperatures, lower humidity, or in poorly ventilated spaces; confirm conditions before recoating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRoof build:\u003c\/strong\u003e Over occupied space, apply as a multi-coat system — three lifts at ~20–25 mils wet each, ~60 mils (≈1.5 mm) total dry. Non-occupied roofs: ~20–25 mils total is typical. Confirm final film thickness and detailing against project design.\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eTypical Physical \u0026amp; Performance Properties\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003eTypical values at 20 °C \/ 50% RH per TDS-PPM v1.1; items marked as ResinTech in-house tests are additional manufacturer data. Actual results depend on substrate, film build, detailing and site conditions. Confirm against project specification.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\" border=\"1\" cellpadding=\"6\"\u003e\n\u003cthead\u003e\u003ctr style=\"background:#1C4F8A;color:#fff;\"\u003e\n\u003cth align=\"left\"\u003eProperty\u003c\/th\u003e\n\u003cth align=\"left\"\u003eTypical Value\u003c\/th\u003e\n\u003cth align=\"left\"\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength\u003c\/td\u003e\n\u003ctd\u003e2.45 MPa (355 psi)\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at Break\u003c\/td\u003e\n\u003ctd\u003e648%\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTear Strength\u003c\/td\u003e\n\u003ctd\u003e19 N\/mm\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D624\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBond Strength to Concrete\u003c\/td\u003e\n\u003ctd\u003e1.06 MPa (154 psi) — exceeds the ≥1.0 MPa requirement\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D4541 (pull-off)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e~65 Shore A\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D2240 (ResinTech in-house test)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd\u003eTaber Abrasion\u003c\/td\u003e\n\u003ctd\u003eNo measurable mass loss\u003c\/td\u003e\n\u003ctd\u003eASTM D4060 — CS-17 wheel, 1000 g load, 1000 cycles (ResinTech in-house test)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eDurability \u0026amp; Environmental Resistance\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\" border=\"1\" cellpadding=\"6\"\u003e\n\u003cthead\u003e\u003ctr style=\"background:#1C4F8A;color:#fff;\"\u003e\n\u003cth align=\"left\"\u003eProperty\u003c\/th\u003e\n\u003cth align=\"left\"\u003eTypical Value\u003c\/th\u003e\n\u003cth align=\"left\"\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow-Temperature Flexibility\u003c\/td\u003e\n\u003ctd\u003e-35 °C, no cracking\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D522\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat Aging (80 °C, 168 h) — Tensile \/ Elongation Retention\u003c\/td\u003e\n\u003ctd\u003e95% \/ 566%\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D573\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlkali Immersion (168 h) — Tensile \/ Elongation Retention\u003c\/td\u003e\n\u003ctd\u003e93% \/ 564%\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D471\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcid Immersion (168 h) — Tensile \/ Elongation Retention\u003c\/td\u003e\n\u003ctd\u003e94% \/ 559%\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D471\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV Resistance (polyurea)\u003c\/td\u003e\n\u003ctd\u003eUV-stable chemistry; resists cracking and embrittlement on exterior exposure\u003c\/td\u003e\n\u003ctd\u003eBased on polyurea chemistry \u0026amp; manufacturer data; final exterior performance varies with system build \u0026amp; exposure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical \u0026amp; Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\" border=\"1\" cellpadding=\"6\"\u003e\n\u003cthead\u003e\u003ctr style=\"background:#1C4F8A;color:#fff;\"\u003e\n\u003cth align=\"left\"\u003eProperty\u003c\/th\u003e\n\u003cth align=\"left\"\u003eTypical Value\u003c\/th\u003e\n\u003cth align=\"left\"\u003eTest Method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater Impermeability\u003c\/td\u003e\n\u003ctd\u003eImpermeable at 0.3 MPa, 120 min\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D5385\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolids Content\u003c\/td\u003e\n\u003ctd\u003e88.5%\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D1353\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater Absorption\u003c\/td\u003e\n\u003ctd\u003e2.8%\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D570\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC Content\u003c\/td\u003e\n\u003ctd\u003e19.2 g\/L\u003c\/td\u003e\n\u003ctd\u003eComparable to ASTM D2369 \/ EPA Method 24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThrough-Dry Time\u003c\/td\u003e\n\u003ctd\u003e~9 h\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking \/ Action Time\u003c\/td\u003e\n\u003ctd\u003e~21 h\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eUV note:\u003c\/strong\u003e ResinTech PPM is a UV-stable polyurea. Owing to its polyurea chemistry, it resists the cracking, embrittlement and loss of waterproofing integrity associated with UV exposure, and is suitable for exposed exterior use as a topcoat over FLEXCOAT-PU and other ResinTech membranes or as a stand-alone membrane. As with all liquid-applied coatings, ultimate exterior durability and any change in surface colour or gloss depend on film build, detailing, application quality and exposure conditions; confirm suitability for the specific exposure against the current TDS and project specification. Where a specific long-term colour or gloss appearance is required, finish with a ResinTech colour-stable topcoat (e.g., HPP or TCU).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasion note:\u003c\/strong\u003e Under Taber testing (ASTM D4060, CS-17 wheel, 1000 g load, 1000 cycles), PPM showed no measurable mass loss. This is attributed to the coating's high elasticity, which deforms elastically under the abrasive wheel rather than eroding. Taber mass-loss characterizes grinding abrasion and is not a substitute for a traffic-wear rating; specify a wear topcoat for sustained traffic.\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003ePackaging, Storage \u0026amp; Shelf Life\u003c\/h3\u003e\n\u003cp\u003ePackaging: 10 L pails. Storage: cool, dry, 5–30 °C; protect from direct sunlight, moisture ingress and freezing. Shelf life: 12 months unopened.\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eLimitations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not exceed the recommended single-coat film thickness (blistering risk).\u003c\/li\u003e\n\u003cli\u003eUse reinforcing fabric at cracks and expansion joints.\u003c\/li\u003e\n\u003cli\u003eNot intended as a vapor barrier or for negative-side hydrostatic pressure without additional design measures.\u003c\/li\u003e\n\u003cli\u003eNot a rated traffic-wear surface on its own under sustained foot or vehicle traffic — protect with a compatible ResinTech topcoat.\u003c\/li\u003e\n\u003cli\u003eConfirm suitability for immersion or chemical service against project conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eHealth \u0026amp; Safety\u003c\/h3\u003e\n\u003cp\u003eUse with adequate ventilation. Avoid skin and eye contact; wear PPE consistent with industrial polyurethane \/ polyurea coating practice. Refer to the ResinTech PPM Safety Data Sheet (SDS) for complete health and safety information.\u003c\/p\u003e\n\u003ch3 style=\"color:#1C4F8A;\"\u003eDisclaimer\u003c\/h3\u003e\n\u003cp\u003eInformation herein is based on manufacturer data, laboratory testing and field application experience. Because installation conditions are beyond our control, field results may vary. Confirm all values against the current TDS, SDS and project specification before use.\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cem\u003eSource: ResinTech PPM Technical Data Sheet (TDS-PPM v1.1) — always refer to the latest published TDS and SDS. Canopus Supply Inc., North Vancouver, BC · 250-233-3000\u003c\/em\u003e\u003c\/p\u003e","brand":"ResinTech","offers":[{"title":"Default Title","offer_id":47091503464668,"sku":null,"price":270.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/resintech-ppm-waterproofing-membrane-4851022.jpg?v=1782540793"},{"product_id":"resintech-ppm-sl-semi-self-leveling","title":"ResinTech PPM-SL | Semi Self-Levelling Crack \u0026 Joint Repair Sealant","description":"\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:6px;padding:12px 16px;margin:0 0 18px 0;\"\u003e\n  \u003cp style=\"margin:0;font-size:1.02em;color:#1C4F8A;\"\u003e\u003cstrong\u003e✅ Usually In Stock — North Vancouver, BC.\u003c\/strong\u003e Call 250-233-3000 to confirm availability or arrange pickup.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eResinTech PPM-SL | Semi Self-Levelling Crack \u0026amp; Joint Repair Sealant\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eSemi Self-Levelling Polyurea Repair \u0026amp; Waterproofing Sealant for Concrete Cracks, Joints \u0026amp; Surface Defects\u003c\/strong\u003e | Brand: ResinTech\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eResinTech PPM-SL is a semi self-levelling polyurea repair and waterproofing sealant for filling, sealing and reinforcing cracks, joints and surface defects in concrete. It is used during substrate preparation to repair and detail cracks, joints and defects before ResinTech coating and traffic-deck systems are installed. Confirm suitability, joint design and application requirements against the current ResinTech TDS, SDS and project specification before use.\u003c\/p\u003e\n\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:0 0 18px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eField\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eResinTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eProduct Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003ePPM-SL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eSemi self-levelling polyurea crack \u0026amp; joint repair sealant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e500 g flexible squeeze tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eCrack, joint \u0026amp; surface-defect repair during substrate preparation — used ahead of ResinTech coating systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eProfessional system note:\u003c\/strong\u003e PPM-SL is used during substrate preparation to fill and reinforce cracks, joints and surface defects before a coating system is installed. Cracks and movement joints must be repaired or detailed before coating — confirm joint design and the correct repair detail against the current ResinTech TDS. It is compatible ahead of ResinTech epoxy, polyaspartic and traffic-deck systems; subsequent layers such as the \u003ca href=\"\/fr\/products\/resintech-core-bond-epoxy-cbe-15l-4-gals\" style=\"color:#1C4F8A;\"\u003eCBE\u003c\/a\u003e \/ \u003ca href=\"\/fr\/products\/transparent-universal-epoxy-100-solids-tue\" style=\"color:#1C4F8A;\"\u003eTUE\u003c\/a\u003e epoxy build and \u003ca href=\"\/fr\/products\/high-performance-polyaspartic-hpp\" style=\"color:#1C4F8A;\"\u003eHPP\u003c\/a\u003e surface are specified per the project.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSemi self-levelling\u003c\/strong\u003e — designed for horizontal crack and joint filling; confirm suitability for your specific joint orientation against the TDS.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlexible formulation\u003c\/strong\u003e — designed to accommodate minor structural movement; confirm movement capability against the TDS and project specification.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow shrinkage, non-brittle finish\u003c\/strong\u003e — confirm performance against the TDS and project specification.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e500 g flexible squeeze tube\u003c\/strong\u003e — confirm quantity requirements before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eConfirm all applications against the current ResinTech TDS before specifying.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCrack and joint repair in concrete prior to coating application\u003c\/li\u003e\n  \u003cli\u003eSurface defect filling in concrete floors and decks\u003c\/li\u003e\n  \u003cli\u003eCrack, joint and defect repair ahead of ResinTech epoxy, polyaspartic and traffic-deck coating systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eNotes \u0026amp; Limitations\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eAlways confirm application requirements against the current TDS, SDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eLimitations\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cul style=\"margin:0;\"\u003e\n    \u003cli\u003eConfirm crack and joint suitability against the TDS — not all crack types are suitable for this product.\u003c\/li\u003e\n    \u003cli\u003eCure time is temperature-dependent — confirm against the current TDS.\u003c\/li\u003e\n    \u003cli\u003eUse as a crack\/joint repair and detailing product ahead of the specified coating system — confirm system compatibility against the current TDS before use.\u003c\/li\u003e\n  \u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdiv style=\"border-left:4px solid #888;background:#f6f6f6;padding:14px 18px;margin:18px 0;border-radius:4px;color:#555;font-size:0.95em;\"\u003e\n  \u003cstrong\u003eDisclaimer:\u003c\/strong\u003e Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\n\u003c\/div\u003e\n\n\u003chr\u003e\n\n\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:4px;padding:16px 20px;margin:20px 0;\"\u003e\n  \u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eTrade Purchasing Note\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 10px 0;\"\u003eAll sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eOrder Enquiries \u0026amp; Volume Orders\u003c\/strong\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003eFor volume orders, system compatibility questions, pickup timing or delivery across BC, contact Canopus Supply before placing a bulk order.\u003c\/p\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003e\u003cstrong\u003eCall:\u003c\/strong\u003e 1 (250) 233-3000\u003cbr\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e \u003ca href=\"mailto:order@canopussupply.com\"\u003eorder@canopussupply.com\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003ePickup:\u003c\/strong\u003e Unit 103, 185 Forester Street, North Vancouver, BC\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorised ResinTech Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e","brand":"ResinTech","offers":[{"title":"Default Title","offer_id":47091503825116,"sku":null,"price":20.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/resintech-ppm-sl-semi-self-leveling-crack-joint-repair-sealant-8720430.jpg?v=1782540793"},{"product_id":"resintech-flexcoat-pu-polyurethane-waterproofing-membrane","title":"ResinTech FLEXCOAT-PU Single-Component Polyurethane Waterproofing Membrane","description":"\u003cdiv style=\"border: 1px solid #1C4F8A; background: #eef4fa; border-radius: 6px; padding: 12px 16px; margin: 0 0 18px 0;\"\u003e\n\u003cp style=\"margin: 0; font-size: 1.02em; color: #1c4f8a;\"\u003e\u003cstrong\u003eStocked by Canopus Supply — North Vancouver, BC.\u003c\/strong\u003e Call 250-233-3000 to confirm current availability or arrange pickup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eResinTech FLEXCOAT-PU Flexible Polyurethane Waterproofing \u0026amp; Crack-Bridging Base Membrane\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eSingle-Component, High-Solids Elastomeric Polyurethane Waterproofing \u0026amp; Crack-Bridging Base Membrane\u003c\/strong\u003e | Brand: ResinTech | ResinTech product code: FPU\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eResinTech FLEXCOAT-PU is a single-component, high-solids elastomeric polyurethane membrane used where the coating system needs flexibility, waterproofing and crack-bridging below the exposed wear surface. It is the movement-control layer of the ResinTech line: applied to the prepared substrate, it helps protect against normal cracking and water intrusion. It is \u003cstrong\u003enot the final wear coat\u003c\/strong\u003e — it must be protected by an approved ResinTech wearing course. Confirm build thickness, primer requirements, detailing, cure and compatible protection layers against the current ResinTech TDS, SDS and project specification before use.\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003e\u003cstrong\u003eA ResinTech Alternative to Tremco Vulkem \u0026amp; Sikalastic Deck Membranes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eComparing polyurethane deck and waterproofing base membranes? ResinTech FLEXCOAT-PU is a single-component, high-elongation (800%), crack-bridging PU base membrane used in the same base-coat waterproofing and traffic-deck applications as Tremco Vulkem 350NF, Vulkem 350 FC and Vulkem 360NF, and Sika Sikalastic M 200 (M-200). Like those products, it works as a flexible, movement-accommodating base layer beneath an approved wearing course on balconies, podium decks, parkades and rooftop decks — a locally stocked ResinTech alternative for contractors specifying or replacing a polyurethane deck membrane in Metro Vancouver and across British Columbia.\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eProduct chemistry, coverage, elongation and system build differ between manufacturers, so always confirm suitability, compatibility and substrate requirements against the current ResinTech TDS and your project specification before substituting any product. \u003cem\u003eVulkem is a registered trademark of Tremco; Sikalastic is a registered trademark of Sika. These names are used for identification and comparison only and do not imply any affiliation with or endorsement by their owners.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 0 0 18px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eField\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eResinTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eProduct Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eFLEXCOAT-PU (ResinTech code: FPU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eSingle-component elastomeric polyurethane waterproofing \u0026amp; crack-bridging membrane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e20 kg pail (kit volume to be confirmed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eReady to use — stir until uniform; no A + B mixing required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eFlexible base \/ movement \u0026amp; waterproofing layer — protected on top by an approved ResinTech wearing course\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eWhere FLEXCOAT-PU sits in the system:\u003c\/strong\u003e FLEXCOAT-PU is the flexible foundation \/ movement layer — \u003cstrong\u003enot the wear surface\u003c\/strong\u003e. Apply it to the prepared substrate, then build and protect on top with the approved ResinTech wearing course: \u003ca href=\"\/fr\/products\/resintech-core-bond-epoxy-cbe-15l-4-gals\" style=\"color: #1c4f8a;\"\u003eCBE\u003c\/a\u003e \/ \u003ca href=\"\/fr\/products\/transparent-universal-epoxy-100-solids-tue\" style=\"color: #1c4f8a;\"\u003eTUE\u003c\/a\u003e epoxy build coats, then an \u003ca href=\"\/fr\/products\/high-performance-polyaspartic-hpp\" style=\"color: #1c4f8a;\"\u003eHPP\u003c\/a\u003e fast-cure UV-stable finish or \u003ca href=\"\/fr\/products\/resintech-chemical-resistant-urethane-cru\" style=\"color: #1c4f8a;\"\u003eCRU\u003c\/a\u003e topcoat (or broadcast, tile, screed or protection board). Never leave the membrane exposed to UV, traffic or chemicals. Confirm the exact layer sequence and primer requirements against the current ResinTech system specification.\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eBest-Use Applications\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eConfirm all applications against the current ResinTech TDS before specifying.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBalcony, podium, plaza and rooftop deck waterproofing under approved protection systems\u003c\/li\u003e\n\u003cli\u003eCrack-bridging base membrane below ResinTech traffic coatings where movement accommodation is required\u003c\/li\u003e\n\u003cli\u003eParking deck waterproofing below approved aggregate, reinforced or traffic-bearing wearing courses\u003c\/li\u003e\n\u003cli\u003eWet-area waterproofing under compatible tile, screed or protection layers\u003c\/li\u003e\n\u003cli\u003eDetail membrane around drains, corners, wall\/floor transitions, pipe penetrations and static cracks\u003c\/li\u003e\n\u003cli\u003eStrata, parkade, balcony and podium restoration where water control and movement risk matter\u003c\/li\u003e\n\u003cli\u003eProtected below-grade, foundation, retaining wall and masonry waterproofing after proper preparation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eProduct Data\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eSource: ResinTech FPU Technical Data Sheet (TDS-FPU-1.0). Typical values at 23 °C and 50% RH unless noted. Confirm against the current TDS before specifying or ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 28%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eNote\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eComponents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eSingle component\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eMoisture-curing polyurethane; stir before use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eChemistry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003ePolyurethane waterproofing membrane\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eIsocyanate \/ polyether-polyol based\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSolids Content\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e98% by weight\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D1353; high-solids, solvent-free grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eLiquid-applied coating\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eColour subject to production availability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eLow — solvent-free grade\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eConfirm current SDS for regulatory g\/L reporting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eApplication Methods\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eRoller, brush, scraper\/squeegee or approved airless spray\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eUse a wet-film gauge during application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e20 kg pail\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eKit volume to be confirmed; other sizes subject to availability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eShelf Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e12 months\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eUnopened, stored properly at 5–35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003ePerformance Properties\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eTypical values from the ResinTech FPU TDS. Actual results depend on substrate, preparation, detailing, film build and conditions — confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 32%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eTest Method \/ Note\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eBond Strength to Concrete\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e150 psi\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D4541; surface prep and primer control final adhesion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eTensile Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e300 psi\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eElongation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e800%\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D412; flexible membrane function\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eTear Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e≈ 86 lbf\/in (15 N\/mm)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D624\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eShore Hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e65 A\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D2240; elastomeric, not a Shore D hardcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eTack-Free Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e8 hours\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D1640 typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eDrying Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e20 hours at 15 mils\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D1640, 24 °C \/ 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eWatertightness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e≈ 44 psi for 120 min, watertight\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eEN 1928 (0.3 MPa)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eLow-Temperature Flexibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e−35 °C, no cracking\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D522\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eUV Stability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eLimited\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eRequires an approved UV-stable topcoat or protection if exposed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eLimited\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eUse a protected system design for chemical or abrasive service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eCoverage \u0026amp; Film Build\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eCoverage per 20 kg kit is approximate (based on ≈1.3–1.5 kg\/m² per mm DFT on a smooth substrate). Kit volume is still to be confirmed — verify actual yield by mock-up. Confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eFilm Build\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003e≈ Coverage \/ 20 kg Kit\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eTraffic Crack-Bridge Base\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e20–25 mils\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e≈ 300–240 ft²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eEnhanced Movement Base\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e40–50 mils\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e≈ 150–120 ft² (balconies, podiums, rooftop decks, over occupied spaces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eProtected Waterproofing Membrane\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e1.0–1.5 mm (≈40–60 mils)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e≈ 155–105 ft²; apply in 2–3 coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eMaximum Coat Thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e0.7 mm (≈28 mils) wet per coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eThicker coats increase bubbling, skinning or slow-cure risk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eApplication Conditions\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eConfirm all conditions against the current ResinTech TDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 40%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eCondition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eRequirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSubstrate Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e5–35 °C during application and cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eAmbient Conditions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eDry, stable; protect from rain, condensation and water exposure before cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eDew Point\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eSubstrate at least 3 °C above dew point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSubstrate Condition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eStructurally sound, stable, clean, smooth and dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eConcrete Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e3,600 psi compressive and 220 psi tensile pull-off recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eRecoat Interval\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eTypically 8–12 hours between coats, depending on film build, temperature, humidity and ventilation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSubsequent Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eAllow membrane to dry before applying topcoat, broadcast, tile, screed or protection layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eApplication Notes\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eAlways confirm application requirements against the current TDS, SDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eSurface Preparation\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cp\u003eSubstrate must be sound, stable, clean, smooth and dry before application. Remove dust, laitance, grease, oils, curing compounds, loose coatings, standing water and bond breakers. Grind high spots and repair holes, honeycombs, cracks, sharp transitions and surface defects before coating. Prime porous, marginal, moisture-risk or project-specified substrates with a ResinTech-approved primer. Existing coatings require compatibility and adhesion testing before overcoating. Do not apply over damp, frozen, contaminated, incompatible or unprepared substrates. Confirm all requirements against the current TDS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eMixing\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cp\u003eStir thoroughly with a low-speed mixer until uniform. Avoid entraining air. Do not thin unless approved in writing. Confirm mixing procedure against the current TDS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eApplication Method\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cp\u003ePre-treat details first — corners, drains, wall\/floor junctions, penetrations, static cracks and transitions — with an extra coat or reinforcement fabric. Apply the field coat evenly by roller, brush, rubber scraper\/squeegee or approved spray in 2–3 coats, each coat perpendicular to the previous where practical to reduce pinholes. Check wet film thickness, pinholes, voids, thin spots and contamination before the next coat or protection layer. Where subsequent tile, plaster, mortar or screed bonding is required, broadcast clean dry fine sand into the final uncured coat. Confirm method against the current TDS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eLimitations\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cul style=\"margin: 0;\"\u003e\n\u003cli\u003eNot intended as a final exposed wear surface by itself — must be covered by an approved wearing course.\u003c\/li\u003e\n\u003cli\u003eUV-exposed applications require an approved UV-stable topcoat or protection system.\u003c\/li\u003e\n\u003cli\u003ePedestrian or vehicular traffic requires an approved wearing course, aggregate system or protection layer.\u003c\/li\u003e\n\u003cli\u003eDo not bridge expansion joints or active movement joints with field membrane alone — movement joints require a project-specific detail and must remain functional.\u003c\/li\u003e\n\u003cli\u003eDo not exceed 0.7 mm (≈28 mils) wet film per coat unless approved by ResinTech.\u003c\/li\u003e\n\u003cli\u003eDo not use for potable water, tank, pool, submerged or aggressive chemical service unless the full system is specifically approved.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdiv style=\"border-left: 4px solid #888; background: #f6f6f6; padding: 14px 18px; margin: 18px 0; border-radius: 4px; color: #555; font-size: 0.95em;\"\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e Isocyanate-based uncured material. Read the SDS before use; wear gloves, eye protection and protective clothing and provide ventilation. The cured membrane must be protected from traffic, abrasion, UV, backfill, sharp damage and contamination by approved system layers. Disposal per local regulations.\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTechnical Documentation\u003c\/h2\u003e\n\u003cp style=\"margin: 8px 0 12px 0; color: #444;\"\u003eDownload the current ResinTech FLEXCOAT-PU Technical Data Sheet (TDS) and Safety Data Sheet (SDS). Confirm all values against the current documentation before specifying or ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv style=\"border: 1px solid #1C4F8A; background: #eef4fa; border-radius: 4px; padding: 16px 20px; margin: 20px 0;\"\u003e\n\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTrade Purchasing Note\u003c\/h2\u003e\n\u003cp style=\"margin: 0 0 10px 0;\"\u003eAll sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 0.9em; color: #555;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eOrder Enquiries \u0026amp; Volume Orders\u003c\/strong\u003e\n\u003cp style=\"margin: 8px 0 0 0;\"\u003eFor volume orders, system compatibility questions, pickup timing or delivery across BC, contact Canopus Supply before placing a bulk order.\u003c\/p\u003e\n\u003cp style=\"margin: 8px 0 0 0;\"\u003e\u003cstrong\u003eCall:\u003c\/strong\u003e 1 (250) 233-3000\u003cbr\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e \u003ca href=\"mailto:order@canopussupply.com\"\u003eorder@canopussupply.com\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003ePickup:\u003c\/strong\u003e Unit 103, 185 Forester Street, North Vancouver, BC\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorised ResinTech Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e","brand":"ResinTech","offers":[{"title":"Default Title","offer_id":51339606524124,"sku":null,"price":320.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/resintech-flexcoat-pu-single-component-polyurethane-waterproofing-membrane-6359644.png?v=1782209227"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/collections\/waterproofing-products-6992038.png?v=1782014756","url":"https:\/\/www.canopussupply.com\/fr\/collections\/waterproofing-products.oembed","provider":"Canopus Supply Inc","version":"1.0","type":"link"}