{"title":"Polyurethane Coatings","description":"\u003cp\u003ePolyurethane and urethane coatings, topcoats and waterproofing membranes for concrete substrates. Urethane systems are used on parking decks, balconies, walkways and high-traffic floors. Shop single- and two-component urethane coatings and aliphatic topcoats. Refer to the manufacturer's current TDS for UV stability, abrasion resistance, flexibility and application data.\u003c\/p\u003e\u003cp\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/p\u003e","products":[{"product_id":"tremco-vulkem-950-nf-slate-gray","title":"Tremco Vulkem 950NF Top Coat – Durable Two-Component Polyurethane Coating","description":"\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTremco Vulkem 950NF | Two-Component Polyurethane Traffic Deck Top Coat\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eTwo-Component Polyurethane Top Coat for the Vulkem 350NF Traffic Deck System\u003c\/strong\u003e | Brand: Tremco\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eVulkem 950NF Top Coat is a two-component polyurethane applied after the Vulkem 350NF base coat has fully cured. Designed for strong interlaminary adhesion to Vulkem 350NF. The top coat is formulated with abrasion resistance and chemical resistance properties to complete the Vulkem \u003ca href=\"\/fr\/collections\/traffic-deck-coatings\" title=\"Traffic Deck Coatings\" style=\"color:#1C4F8A;\"\u003etraffic coating systems\u003c\/a\u003e. Confirm suitability against the current TDS, SDS, and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eProfessional system note:\u003c\/strong\u003e Vulkem 950NF must be applied over a fully cured Vulkem 350NF base coat as part of the approved Tremco traffic deck system. \u003cstrong\u003eDo not apply directly to bare concrete.\u003c\/strong\u003e Confirm the full system specification before use.\u003c\/div\u003e\n\u003cdiv style=\"border: 1px dashed #1C4F8A; background: #f4f8fc; padding: 14px 18px; margin: 18px 0; border-radius: 6px;\"\u003e\n\u003cspan style=\"display:inline-block; font-size:0.75em; font-weight:700; letter-spacing:0.5px; color:#1C4F8A; text-transform:uppercase; margin-bottom:6px;\"\u003eAlso available — ResinTech alternative\u003c\/span\u003e\n\u003cp style=\"margin:0; color:#444;\"\u003ePrefer a locally stocked alternative? \u003ca href=\"\/fr\/products\/resintech-chemical-resistant-urethane-cru\" style=\"color:#1C4F8A; font-weight:600;\"\u003eResinTech CRU Chemical-Resistant Urethane\u003c\/a\u003e is a two-component chemical-resistant urethane topcoat and wearing surface, stocked in North Vancouver and used in the same two-component polyurethane topcoat and wearing-course applications. Product chemistry and system build differ between manufacturers — confirm suitability against the current ResinTech TDS before substituting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eComponents\u003c\/strong\u003e\u003cbr\u003eTwo-component polyurethane\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eAbrasion Resistance\u003c\/strong\u003e\u003cbr\u003eFormulated for abrasion resistance — confirm against TDS\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003cbr\u003eFormulated for chemical resistance — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eInterlaminary Adhesion\u003c\/strong\u003e\u003cbr\u003eDesigned for adhesion to Vulkem 350NF\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003cbr\u003eTop coat \/ wearing course\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003cbr\u003e4.2 gal kit (Part A + Part B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasion Resistance:\u003c\/strong\u003e Formulated as a durable wearing surface for vehicular and pedestrian traffic; confirm load ratings against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical Resistance:\u003c\/strong\u003e Formulated with resistance to fuels, oils, de-icing salts, and industrial chemicals; confirm chemical compatibility against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterlaminary Adhesion:\u003c\/strong\u003e Designed for adhesion to the Vulkem 350NF base coat; confirm application window and surface condition requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Component:\u003c\/strong\u003e Requires accurate mixing at specified ratio; confirm pot life and application temperature requirements against the TDS before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParking garages and parkade decks\u003c\/li\u003e\n\u003cli\u003ePedestrian walkways and plaza decks\u003c\/li\u003e\n\u003cli\u003eConcrete slabs over occupied areas requiring waterproofing and traffic protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: #1C4F8A; color: #fff;\"\u003e\n\u003cth style=\"border: 1px solid #c9d6e5; padding: 10px; text-align: left;\"\u003eProperty\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #c9d6e5; padding: 10px; text-align: left;\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eComponents\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eTwo-component polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f4f8fc;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003ePackaging\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e4.2 gal kit: Part A 3.25 gal (12.3 L) + Part B 0.95 gal (3.6 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eSystem Role\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eTop coat \/ wearing course over Vulkem 350NF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eHealth \u0026amp; Safety\u003c\/h2\u003e\n\u003cp\u003eRead the current Safety Data Sheet (SDS) before use. Contains isocyanate components — wear gloves, eye protection, and ensure adequate ventilation during mixing and application.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between Vulkem 950NF and Vulkem 951NF?\u003c\/h3\u003e\n\u003cp\u003eBoth are two-component polyurethane top coats for Tremco traffic deck systems. Vulkem 951NF is an aliphatic formulation designed for UV stability and colour retention in exposed exterior applications. Confirm the correct product for your system specification against the current TDS.\u003c\/p\u003e\n\u003ch3\u003eCan Vulkem 950NF be applied directly to concrete?\u003c\/h3\u003e\n\u003cp\u003eNo. Vulkem 950NF must be applied over a fully cured Vulkem 350NF base coat. Do not apply directly to bare concrete.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eComplete the Tremco Traffic Deck System\u003c\/h2\u003e\n\u003cp style=\"color: #444;\"\u003eVulkem 950NF is the final wearing course in a multi-component system. Confirm the full system specification and application sequence against current Tremco documentation before ordering.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit,minmax(200px,1fr)); gap: 14px; margin: 16px 0;\"\u003e\n\u003cdiv style=\"background: #eef4fa; border-radius: 6px; padding: 16px; border-top: 3px solid #1C4F8A;\"\u003e\n\u003cstrong style=\"color: #1c4f8a; display: block; margin-bottom: 6px;\"\u003eStep 1 — Primer\u003c\/strong\u003e \u003cspan style=\"color: #444; font-size: 0.95em;\"\u003eTremco Epoxy Primer — two-component tie-in primer for concrete and transition zones.\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"\/fr\/products\/tremco-epoxy-primer\" style=\"color: #1c4f8a; font-size: 0.9em; font-weight: bold;\"\u003eView Product →\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #eef4fa; border-radius: 6px; padding: 16px; border-top: 3px solid #1C4F8A;\"\u003e\n\u003cstrong style=\"color: #1c4f8a; display: block; margin-bottom: 6px;\"\u003eStep 2 — Base Coat\u003c\/strong\u003e \u003cspan style=\"color: #444; font-size: 0.95em;\"\u003eVulkem 350NF — single-component urethane waterproofing membrane.\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"\/fr\/products\/tremco-vulkem-350nf\" style=\"color: #1c4f8a; font-size: 0.9em; font-weight: bold;\"\u003eView Product →\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #eef4fa; border-radius: 6px; padding: 16px; border-top: 3px solid #1C4F8A;\"\u003e\n\u003cstrong style=\"color: #1c4f8a; display: block; margin-bottom: 6px;\"\u003eStep 3 — Top Coat (this product)\u003c\/strong\u003e \u003cspan style=\"color: #444; font-size: 0.95em;\"\u003eVulkem 950NF — two-component polyurethane wearing course.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1C4F8A;\"\u003eRelated systems at Canopus Supply:\u003c\/strong\u003e\u003cbr\u003e\nBrowse \u003ca href=\"\/fr\/collections\/traffic-deck-coatings\" style=\"color:#1C4F8A;\"\u003etraffic coating systems\u003c\/a\u003e, \u003ca href=\"\/fr\/collections\/waterproofing-products\" style=\"color:#1C4F8A;\"\u003ewaterproofing membranes\u003c\/a\u003e, and \u003ca href=\"\/fr\/collections\/concrete-sealers\" style=\"color:#1C4F8A;\"\u003econstruction sealants\u003c\/a\u003e for related products and system components.\n\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 18px; margin: 16px 0; border-radius: 4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 18px; margin: 16px 0; border-radius: 4px;\"\u003e\u003cspan style=\"color: #444;\"\u003eNeed help specifying the full system? \u003ca href=\"\/fr\/pages\/contact-us\" style=\"color: #1c4f8a; font-weight: bold;\"\u003eContact Canopus Supply\u003c\/a\u003e — \u003ca href=\"tel:2502333000\" style=\"color: #1c4f8a;\"\u003e250-233-3000\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eTremco\u003c\/strong\u003e — Professional Waterproofing \u0026amp; Traffic Deck Systems\u003c\/p\u003e\n\u003cp style=\"font-size: 0.85em; color: #777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAvailable at Canopus Supply — North Vancouver, BC. Authorized distributor in British Columbia.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Tremco","offers":[{"title":"Gray","offer_id":40165303910579,"sku":"","price":348.0,"currency_code":"CAD","in_stock":true},{"title":"Black","offer_id":40165303812275,"sku":"","price":420.0,"currency_code":"CAD","in_stock":true},{"title":"Slate Gray","offer_id":40165303845043,"sku":"","price":420000.0,"currency_code":"CAD","in_stock":true},{"title":"Limestone","offer_id":40165303877811,"sku":"","price":420.0,"currency_code":"CAD","in_stock":true},{"title":"Beige","offer_id":40165303943347,"sku":"","price":420.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/tremco-vulkem-950nf-top-coat-1742652.jpg?v=1776710893"},{"product_id":"tremco-vulkem-951nf-top-coat","title":"Tremco Vulkem 951NF Top Coat","description":"\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTremco Vulkem® 951NF Top Coat\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eAliphatic, Two-Component Polyurethane Traffic Deck Top Coat\u003c\/strong\u003e | Brand: Tremco\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eTremco Vulkem 951NF is an aliphatic, two-component polyurethane top coat for vehicular and pedestrian \u003ca href=\"\/fr\/collections\/traffic-deck-coatings\" title=\"Traffic Deck Coatings\"\u003etraffic deck\u003c\/a\u003e systems. Applied over compatible Vulkem base coats as part of an approved Tremco system, it is formulated for UV stability and wear resistance on parkades, podium decks, and exposed pedestrian areas. Confirm suitability, system compatibility, coverage, and cure requirements against the current Tremco TDS, SDS, and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eProfessional system note:\u003c\/strong\u003e Vulkem 951NF must be applied over a compatible Tremco base coat (such as Vulkem 350NF or 360NF) as part of an approved system. \u003cstrong\u003eDo not apply directly to bare concrete.\u003c\/strong\u003e Confirm the full system specification before use.\u003c\/div\u003e\n\u003cdiv style=\"border: 1px dashed #1C4F8A; background: #f4f8fc; padding: 14px 18px; margin: 18px 0; border-radius: 6px;\"\u003e\n\u003cspan style=\"display:inline-block; font-size:0.75em; font-weight:700; letter-spacing:0.5px; color:#1C4F8A; text-transform:uppercase; margin-bottom:6px;\"\u003eAlso available — ResinTech alternative\u003c\/span\u003e\n\u003cp style=\"margin:0; color:#444;\"\u003ePrefer a locally stocked alternative? \u003ca href=\"\/fr\/products\/high-performance-polyaspartic-hpp\" style=\"color:#1C4F8A; font-weight:600;\"\u003eResinTech HPP Fast-Cure Polyaspartic\u003c\/a\u003e is a fast-cure, UV-stable polyaspartic traffic-deck topcoat and wearing surface, stocked in North Vancouver and used in the same UV-stable traffic-deck topcoat and wearing-course applications. Product chemistry and system build differ between manufacturers — confirm suitability against the current ResinTech TDS before substituting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eVulkem 951NF is an aliphatic polyurethane formulated for UV stability and colour retention under prolonged sun exposure. As the final layer in a Tremco traffic deck system, it is designed to provide a wearing surface that protects the underlying waterproofing membrane from abrasion, chemicals, and weathering; confirm performance properties against the current TDS and project specification. Its two-component formulation requires accurate mixing at the specified ratio; confirm pot life, application temperature, and cure requirements against the TDS before use.\u003c\/p\u003e\n\u003cp\u003eThe NF designation indicates a non-flammable, low-VOC formula; confirm ventilation requirements against the SDS. Available in multiple colours to meet project aesthetic and safety-marking requirements; confirm colour availability with Canopus Supply before specifying.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stable, aliphatic chemistry\u003c\/strong\u003e — formulated to resist colour fade and chalking on exposed, sunlit deck surfaces; confirm UV performance against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-component system\u003c\/strong\u003e — requires accurate mixing at the specified ratio; confirm mixing requirements and pot life against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-flammable, low VOC\u003c\/strong\u003e — formulated for use in enclosed parkades and occupied-building work areas with appropriate ventilation; confirm ventilation requirements against the SDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasion and chemical resistance properties\u003c\/strong\u003e — formulated to resist vehicular traffic, tire scuff, de-icing salts, and fuel spills; confirm chemical compatibility and traffic suitability against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless wearing surface\u003c\/strong\u003e — liquid-applied to form a continuous top coat over the waterproofing system; final performance depends on substrate condition, system design, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple colours available\u003c\/strong\u003e — confirm current colour availability and lead times with Canopus Supply before specifying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem-compatible\u003c\/strong\u003e — designed for use over Vulkem 350NF, 360NF, and other approved Tremco base coats; confirm system compatibility against the current Tremco specification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParkade and parking structure traffic deck top coat\u003c\/li\u003e\n\u003cli\u003ePodium and plaza deck wearing course\u003c\/li\u003e\n\u003cli\u003eExposed pedestrian walkways and ramps\u003c\/li\u003e\n\u003cli\u003eVehicular and pedestrian traffic areas over waterproofing membranes\u003c\/li\u003e\n\u003cli\u003eColour and safety-marking coats on traffic deck systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e\u003cbr\u003eAliphatic polyurethane, 2-component\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eVOC\u003c\/strong\u003e\u003cbr\u003eLow VOC \/ Non-flammable\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eUV Stability\u003c\/strong\u003e\u003cbr\u003eAliphatic formula — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eTraffic Suitability\u003c\/strong\u003e\u003cbr\u003eVehicular and pedestrian — confirm against TDS\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003eRoller or squeegee\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003cbr\u003eTop coat \/ wearing course\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eSurface Preparation \u0026amp; Application\u003c\/h2\u003e\n\u003cp\u003eApply only over a fully cured, approved Tremco base coat. The base coat surface must be clean, dry, and free of contamination. Mix components thoroughly at the ratio specified in the current TDS using a low-speed mixer. Apply by roller or squeegee at the specified film thickness. Allow adequate cure before opening to traffic. Refer to the current Tremco TDS and system specification for mixing ratios, coverage rates, recoat windows, and cure times.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMust be applied over a compatible, approved Tremco base coat — not for direct application to concrete.\u003c\/li\u003e\n\u003cli\u003eDo not apply to damp, contaminated, or incompletely cured base coat surfaces.\u003c\/li\u003e\n\u003cli\u003eDo not apply outside recommended temperature and humidity ranges per the TDS.\u003c\/li\u003e\n\u003cli\u003eColour availability subject to stock — confirm with Canopus Supply before specifying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eStorage \u0026amp; Shelf Life\u003c\/h2\u003e\n\u003cp\u003eStore in original, unopened containers in a cool, dry, ventilated area away from direct sunlight and heat. Confirm shelf life and storage conditions against the product label and current SDS.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eHealth \u0026amp; Safety\u003c\/h2\u003e\n\u003cp\u003eRead the current Safety Data Sheet (SDS) before use. Contains isocyanate components — wear appropriate gloves, eye protection, and respiratory protection. Ensure adequate ventilation during application and cure. Refer to the SDS for full hazard classification and first-aid measures.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat base coat is Vulkem 951NF compatible with?\u003c\/h3\u003e\n\u003cp\u003eVulkem 951NF is designed for use over Tremco Vulkem 350NF, 360NF, and other approved Tremco base coats as part of a complete traffic deck system. Always confirm the full system specification with the current Tremco TDS or Canopus Supply before application.\u003c\/p\u003e\n\u003ch3\u003eCan Vulkem 951NF be used on exposed outdoor decks?\u003c\/h3\u003e\n\u003cp\u003eIts aliphatic polyurethane chemistry is formulated for UV stability on exposed, sunlit surfaces such as podium decks, ramps, and open-air parkade levels. Confirm suitability for your specific exposure conditions against the current TDS.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for vehicular traffic?\u003c\/h3\u003e\n\u003cp\u003eWhen applied as part of an approved Tremco traffic deck system over a compatible base coat, Vulkem 951NF is designed for vehicular traffic applications. Confirm traffic load ratings and system requirements against the current TDS and project specification.\u003c\/p\u003e\n\u003ch3\u003eWhat colours are available?\u003c\/h3\u003e\n\u003cp\u003eMultiple colours are available to support traffic marking and architectural requirements. Contact Canopus Supply to confirm current colour availability and lead times before specifying.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorized Tremco Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size: 0.85em; color: #777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tremco","offers":[{"title":"Beige","offer_id":40106742612147,"sku":"","price":650.0,"currency_code":"CAD","in_stock":true},{"title":"Gray","offer_id":40106742644915,"sku":"","price":650.0,"currency_code":"CAD","in_stock":true},{"title":"Limestone","offer_id":40106742677683,"sku":"","price":650.0,"currency_code":"CAD","in_stock":true},{"title":"Slate Gray","offer_id":40106742710451,"sku":"","price":650.0,"currency_code":"CAD","in_stock":true},{"title":"Black","offer_id":40106742743219,"sku":"","price":650.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/tremco-vulkem-951nf-top-coat-2272020.jpg?v=1776710892"},{"product_id":"tremco-vulkem-346-aliphatic-topcoat","title":"Tremco Vulkem 346 | Aliphatic One-Component Polyurethane Traffic Deck Top Coat","description":"\u003cdiv style=\"margin:0 0 18px 0;\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/Vulkem_360NF_346_346.pdf?v=1632860529\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#1C4F8A;color:#fff;padding:10px 20px;border-radius:4px;text-decoration:none;font-weight:600;margin:6px 8px 6px 0;\"\u003e⬇ Download TDS (PDF)\u003c\/a\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTremco Vulkem 346 | Aliphatic One-Component Polyurethane Traffic Deck Top Coat\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eUV-Stable Aliphatic Polyurethane Top Coat for the Vulkem 350NF\/346\/346 Traffic Deck System\u003c\/strong\u003e | Brand: Tremco\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eVulkem 346 Top Coat is an aliphatic, one-component polyurethane applied as the final wear surface in the Vulkem 350NF\/346\/346 cold-applied \u003ca href=\"\/fr\/collections\/traffic-deck-coatings\" title=\"Traffic Deck Coatings\" style=\"color:#1C4F8A;\"\u003etraffic coating systems\u003c\/a\u003e. Formulated for UV stability and wear resistance on concrete slabs and occupied areas. Confirm suitability, system compatibility, coverage, and cure requirements against the current Tremco TDS, SDS, and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border: 1px dashed #1C4F8A; background: #f4f8fc; padding: 14px 18px; margin: 18px 0; border-radius: 6px;\"\u003e\n\u003cspan style=\"display:inline-block; font-size:0.75em; font-weight:700; letter-spacing:0.5px; color:#1C4F8A; text-transform:uppercase; margin-bottom:6px;\"\u003eAlso available — ResinTech alternative\u003c\/span\u003e\n\u003cp style=\"margin:0; color:#444;\"\u003ePrefer a locally stocked alternative? \u003ca href=\"\/fr\/products\/resintech-protective-polymer-membrane-ppm\" style=\"color:#1C4F8A; font-weight:600;\"\u003eResinTech PPM Protective Polyurea Membrane\u003c\/a\u003e is a UV-stable polyurea waterproofing membrane and exposed wear-surface topcoat, stocked in North Vancouver and used in the same exposed UV-stable traffic-deck topcoat and waterproofing applications. Product chemistry and system build differ between manufacturers — confirm suitability against the current ResinTech TDS before substituting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eComponents\u003c\/strong\u003e\u003cbr\u003eOne-component\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eUV Stability\u003c\/strong\u003e\u003cbr\u003eAliphatic formula — confirm against TDS\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eAbrasion Resistance\u003c\/strong\u003e\u003cbr\u003eFormulated for abrasion resistance — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003cbr\u003eFormulated for chemical resistance — confirm against TDS\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eInterlaminary Adhesion\u003c\/strong\u003e\u003cbr\u003eDesigned for adhesion to Vulkem 346 intermediate coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003eCold-applied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eVulkem 346 Top Coat is applied after the Vulkem 350NF base coat and 346 intermediate coat have fully cured. It is designed for strong interlaminary adhesion to the Vulkem 346 intermediate coat; confirm adhesion requirements and recoat windows against the current TDS. The aliphatic polyurethane chemistry is formulated for UV stability compared to aromatic alternatives; confirm UV performance against the TDS. The system is designed to protect concrete from water damage, freeze\/thaw cycling, de-icing salts, chemicals, and fuel exposure; confirm chemical compatibility against the TDS and project specification.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eSystem Overview — Vulkem 350NF\/346\/346\u003c\/h2\u003e\n\u003cp\u003eVulkem 346 Top Coat is the final layer in the Vulkem 350NF\/346\/346 cold-applied traffic deck coating system:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Coat:\u003c\/strong\u003e Vulkem 350NF — single-component urethane \u003ca href=\"\/fr\/collections\/waterproofing-products\" style=\"color:#1C4F8A;\"\u003ewaterproofing membrane\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermediate Coat:\u003c\/strong\u003e Vulkem 346 — aliphatic polyurethane build coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Coat:\u003c\/strong\u003e \u003cstrong\u003eVulkem 346\u003c\/strong\u003e — UV-stable aliphatic polyurethane wear surface\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stable, aliphatic formula\u003c\/strong\u003e — formulated to resist yellowing and degradation under UV exposure; confirm UV performance against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasion resistance properties\u003c\/strong\u003e — formulated as a durable wear surface for vehicular and pedestrian traffic; confirm load ratings against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance properties\u003c\/strong\u003e — formulated with resistance to fuels, oils, de-icing salts, and chemicals; confirm chemical compatibility against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproofing system role\u003c\/strong\u003e — designed to protect concrete and occupied areas below from water damage as part of the complete system; confirm system design against the current Tremco specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterlaminary adhesion\u003c\/strong\u003e — designed for adhesion to the Vulkem 346 intermediate coat; confirm application window and surface condition requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold-applied\u003c\/strong\u003e — no heat required; applied at ambient temperatures within the temperature range specified in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParking garages and parkade decks\u003c\/li\u003e\n\u003cli\u003ePedestrian walkways and plaza decks\u003c\/li\u003e\n\u003cli\u003eConcrete slabs over occupied areas\u003c\/li\u003e\n\u003cli\u003eTraffic deck systems exposed to de-icing salts and chemicals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eDownloads\u003c\/h2\u003e\n\u003cp style=\"color:#444;\"\u003eDownload the current Technical Data Sheet (TDS) using the button at the top of this page.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eHealth \u0026amp; Safety\u003c\/h2\u003e\n\u003cp\u003eRead the current Safety Data Sheet (SDS) before use. Wear chemical-resistant gloves, safety goggles, and ensure adequate ventilation during application. Store in a cool, dry location in original sealed containers away from heat and ignition sources.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between Vulkem 346 and Vulkem 951NF as a top coat?\u003c\/h3\u003e\n\u003cp\u003eBoth are aliphatic polyurethane top coats. Vulkem 951NF is a two-component product; Vulkem 346 is a one-component product used in the Vulkem 350NF\/346\/346 system. Confirm the correct system specification for your project against the current Tremco TDS.\u003c\/p\u003e\n\u003ch3\u003eDoes Vulkem 346 require a primer?\u003c\/h3\u003e\n\u003cp\u003eVulkem 346 Top Coat is applied over a fully cured Vulkem 346 intermediate coat within the Vulkem 350NF\/346\/346 system. Refer to the current TDS for recoat windows and system requirements.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1C4F8A;\"\u003eRelated systems at Canopus Supply:\u003c\/strong\u003e\u003cbr\u003e\nBrowse \u003ca href=\"\/fr\/collections\/traffic-deck-coatings\" style=\"color:#1C4F8A;\"\u003etraffic coating systems\u003c\/a\u003e, \u003ca href=\"\/fr\/collections\/waterproofing-products\" style=\"color:#1C4F8A;\"\u003ewaterproofing membranes\u003c\/a\u003e, and \u003ca href=\"\/fr\/collections\/concrete-sealers\" style=\"color:#1C4F8A;\"\u003econstruction sealants\u003c\/a\u003e for related products and system components.\n\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eTremco\u003c\/strong\u003e — Professional Waterproofing \u0026amp; Traffic Deck Systems\u003c\/p\u003e\n\u003cp style=\"font-size: 0.85em; color: #777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAvailable at Canopus Supply — North Vancouver, BC. Authorized distributor in British Columbia.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Tremco","offers":[{"title":"Black","offer_id":40165334941875,"sku":null,"price":420.0,"currency_code":"CAD","in_stock":true},{"title":"Slate Gray","offer_id":40165334974643,"sku":null,"price":420.0,"currency_code":"CAD","in_stock":true},{"title":"Gray","offer_id":40165335007411,"sku":"","price":420.0,"currency_code":"CAD","in_stock":true},{"title":"White","offer_id":40165335040179,"sku":null,"price":420.0,"currency_code":"CAD","in_stock":true},{"title":"Limestone","offer_id":40165335072947,"sku":null,"price":420.0,"currency_code":"CAD","in_stock":true},{"title":"Beige","offer_id":40165335105715,"sku":null,"price":420.0,"currency_code":"CAD","in_stock":true},{"title":"Maple","offer_id":40165335138483,"sku":null,"price":420.0,"currency_code":"CAD","in_stock":true},{"title":"Charcoal","offer_id":40165335171251,"sku":null,"price":420.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/tremco-vulkem-346-aliphatic-one-component-polyurethane-traffic-deck-top-coat-4611762.png?v=1783120872"},{"product_id":"vulkem-360nf-base-coat","title":"Vulkem 360NF Base Coat - Low VOC, water-cured, rapid setting urethane membrane","description":"\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTremco Vulkem® 360NF Base Coat\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eLow-VOC, Water-Cured, Rapid-Setting Urethane Waterproofing Membrane\u003c\/strong\u003e | Brand: Tremco\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eTremco Vulkem® 360NF is a single-component, moisture-curing, rapid-setting \u003ca href=\"\/fr\/collections\/waterproofing-products\" title=\"Waterproofing Products\"\u003eurethane membrane\u003c\/a\u003e formulated as the base coat in Tremco’s Vulkem \u003ca href=\"\/fr\/collections\/traffic-deck-coatings\" title=\"Traffic Deck Coatings\"\u003etraffic deck\u003c\/a\u003e waterproofing system. Its low-VOC, solvent-free formulation is designed for use in enclosed parkades and occupied structures with appropriate ventilation. Confirm suitability, system compatibility, coverage, and cure requirements against the current Tremco TDS, SDS, and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eProfessional system note:\u003c\/strong\u003e Vulkem 360NF is the \u003cstrong\u003ebase coat\u003c\/strong\u003e in the Vulkem traffic deck system. It must be applied over an approved Tremco primer and topcoated with Vulkem 951NF or another approved Tremco wearing course. \u003cstrong\u003eDo not use as a standalone waterproofing membrane.\u003c\/strong\u003e Confirm the full system specification before use.\u003c\/div\u003e\n\u003cdiv style=\"border: 1px dashed #1C4F8A; background: #f4f8fc; padding: 14px 18px; margin: 18px 0; border-radius: 6px;\"\u003e\n\u003cspan style=\"display:inline-block; font-size:0.75em; font-weight:700; letter-spacing:0.5px; color:#1C4F8A; text-transform:uppercase; margin-bottom:6px;\"\u003eAlso available — ResinTech alternative\u003c\/span\u003e\n\u003cp style=\"margin:0; color:#444;\"\u003ePrefer a locally stocked alternative? \u003ca href=\"\/fr\/products\/resintech-flexcoat-pu-polyurethane-waterproofing-membrane\" style=\"color:#1C4F8A; font-weight:600;\"\u003eResinTech FLEXCOAT-PU\u003c\/a\u003e is a single-component elastomeric polyurethane waterproofing \u0026amp; crack-bridging base membrane, stocked in North Vancouver and used in the same base-coat \/ traffic-deck waterproofing applications. Product chemistry and system build differ between manufacturers — confirm suitability against the current ResinTech TDS before substituting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eVulkem 360NF cures by reaction with atmospheric moisture to form a seamless, fully-adhered elastomeric membrane. Its NF (No Flash) designation indicates a low-VOC, non-flammable formulation — designed for enclosed parkades and occupied buildings where solvent-based products present ventilation and fire safety challenges; confirm ventilation requirements against the SDS.\u003c\/p\u003e\n\u003cp\u003eThe rapid-setting formulation is designed to reduce the time between base coat application and topcoat installation, helping to compress the overall project schedule; confirm cure times against the current TDS as they vary with temperature and humidity. Once cured, Vulkem 360NF is designed to provide a flexible, crack-bridging base that accommodates minor substrate movement and thermal cycling; confirm crack-bridging performance against the TDS and project specification.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-VOC, non-flammable (NF)\u003cbr\u003e\u003c\/strong\u003eFormulated for enclosed parkades and occupied structures with appropriate ventilation; confirm ventilation requirements against the SDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid-Setting\u003cbr\u003e\u003c\/strong\u003eDesigned for faster cure than conventional urethane membranes; confirm cure times against the TDS as they vary with temperature and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component, moisture-curing\u003cbr\u003e\u003c\/strong\u003eNo mixing required; apply directly from the pail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, fully-adhered membrane\u003cbr\u003e\u003c\/strong\u003eDesigned to eliminate laps and seams; final performance depends on substrate condition, preparation, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrack-bridging elastomeric properties\u003cbr\u003e\u003c\/strong\u003eDesigned to accommodate minor substrate movement and thermal cycling; confirm crack-bridging performance against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTremco system compatible\u003cbr\u003e\u003c\/strong\u003eDesigned for use with Vulkem 191 QD Primer and Vulkem 951NF topcoat as part of a complete traffic deck assembly; confirm system compatibility against the current Tremco specification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBase coat membrane in Vulkem vehicular traffic deck waterproofing systems\u003c\/li\u003e\n\u003cli\u003eBase coat membrane in Vulkem pedestrian traffic deck waterproofing systems\u003c\/li\u003e\n\u003cli\u003eParkade and parking structure deck waterproofing\u003c\/li\u003e\n\u003cli\u003ePodium deck and plaza deck waterproofing base coat\u003c\/li\u003e\n\u003cli\u003eRamp and drive aisle waterproofing base coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e\u003cbr\u003eSingle-component polyurethane (urethane)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eCure Mechanism\u003c\/strong\u003e\u003cbr\u003eMoisture-curing, rapid-setting\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eVOC\u003c\/strong\u003e\u003cbr\u003eLow-VOC, non-flammable (NF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eMembrane Type\u003c\/strong\u003e\u003cbr\u003eFluid-applied, fully-adhered base coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003cbr\u003eBase coat \/ waterproofing layer\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eCompatible Topcoat\u003c\/strong\u003e\u003cbr\u003eVulkem 951NF (or approved equivalent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eConcrete must be structurally sound, clean, and free of laitance, oil, grease, curing compounds, and form release agents. Mechanically profile the surface to the CSP specified in the TDS. Fill surface voids, honeycombs, and bug holes with a compatible patching mortar. Apply Vulkem 191 QD Primer (or approved Tremco primer) at the specified coverage rate and allow to dry before applying Vulkem 360NF. Refer to the current Tremco system specification for full substrate preparation requirements.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eApplication Instructions\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e Prepare the concrete as described above. Apply approved primer and allow it to dry to the tack-free state specified in the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetail work:\u003c\/strong\u003e Apply membrane to all coves, inside and outside corners, pipe penetrations, and construction joints before field application. Embed reinforcing fabric at all details as specified.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField application:\u003c\/strong\u003e Apply Vulkem 360NF by squeegee and back-roll at the wet film thickness specified in the TDS. Ensure uniform coverage with no holidays or thin spots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure:\u003c\/strong\u003e Allow to cure to the state specified in the TDS before applying the topcoat. Cure time is temperature and humidity dependent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcoat:\u003c\/strong\u003e Apply Vulkem 951NF (or approved topcoat) within the recoat window specified in the TDS.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMust be used as part of an approved Tremco Vulkem traffic deck system, not a standalone waterproofing membrane.\u003c\/li\u003e\n\u003cli\u003eDo not apply to substrates with active water leaks or running water.\u003c\/li\u003e\n\u003cli\u003eDo not apply below minimum temperature or when rain or condensation is expected before cure; confirm temperature requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recoat window without re-priming the surface.\u003c\/li\u003e\n\u003cli\u003ePot life and cure time are temperature and humidity-dependent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing, and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorized Tremco Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size: 0.85em; color: #777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tremco","offers":[{"title":"Default Title","offer_id":40165483839667,"sku":"","price":480.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/vulkem-360nf-base-coat-low-voc-water-cured-rapid-setting-urethane-membrane-7966327.png?v=1782292274"},{"product_id":"tremproof-250gc-waterproofing-membrane","title":"TREMproof® 250GC Single-Component, Rapid Curing, Fluid-Applied Elastomeric Waterproofing Membrane","description":"\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTremco TREMproof® 250GC | Single-Component Fluid-Applied Waterproofing Membrane\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eSingle-Component, Rapid-Curing, Fluid-Applied Elastomeric Waterproofing Membrane\u003c\/strong\u003e | Brand: Tremco\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eTremco TREMproof® 250GC is a single-component, moisture-curing, fluid-applied polyurethane \u003ca href=\"\/fr\/collections\/waterproofing-products\" title=\"Waterproofing Products\"\u003ewaterproofing membrane\u003c\/a\u003e designed for below-grade and plaza deck applications. Its rapid-cure, green concrete compatible (GC) formulation is designed for professional waterproofing contractors. Confirm suitability, coverage, cure time, and system compatibility against the current Tremco TDS, SDS, and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eProfessional system note:\u003c\/strong\u003e TREMproof 250GC must be applied as part of an approved Tremco waterproofing system including compatible primers, protection boards, and drainage composites where required. \u003cstrong\u003eDo not use as a standalone exposed membrane.\u003c\/strong\u003e Confirm the full system specification against the current Tremco TDS and project specification before use.\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component, moisture-curing\u003c\/strong\u003e — no mixing required; apply directly from the container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid-curing\u003c\/strong\u003e — designed for faster cure than conventional membranes; confirm cure times against the current TDS as they vary with temperature and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreen concrete compatible (GC)\u003c\/strong\u003e — designed for application to green concrete; confirm minimum concrete age and moisture requirements against the current TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, fully-adhered membrane\u003c\/strong\u003e — fluid-applied to form a continuous waterproofing layer; final performance depends on substrate condition, preparation, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrack-bridging elastomeric properties\u003c\/strong\u003e — designed to accommodate minor substrate movement; confirm crack-bridging performance against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatible\u003c\/strong\u003e — designed for use with Tremco protection boards and drainage composites; confirm system compatibility against the current Tremco specification before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBelow-grade foundation wall waterproofing\u003c\/li\u003e\n\u003cli\u003ePlaza deck and podium deck waterproofing\u003c\/li\u003e\n\u003cli\u003eSplit-slab and buried deck waterproofing\u003c\/li\u003e\n\u003cli\u003eGreen concrete substrate waterproofing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eConcrete must be structurally sound, clean, and free of laitance, oil, grease, curing compounds, and form release agents. Confirm minimum concrete age, surface profile, and moisture requirements against the current Tremco TDS. Apply approved primer where required by the system specification. Refer to the current Tremco system specification for full substrate preparation requirements.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMust be used as part of an approved Tremco waterproofing system — not a standalone exposed membrane.\u003c\/li\u003e\n\u003cli\u003eDo not apply to substrates with active water leaks or running water.\u003c\/li\u003e\n\u003cli\u003eDo not apply below minimum temperature or when rain or condensation is expected before cure; confirm temperature requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003eCure time is temperature and humidity dependent — confirm against the current TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorized Tremco Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size: 0.85em; color: #777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tremco","offers":[{"title":"Default Title","offer_id":40219287126195,"sku":"","price":390.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/tremproof-250gc-single-component-rapid-curing-fluid-applied-elastomeric-waterproofing-membrane-5776295.jpg?v=1776710830"},{"product_id":"b-tuff-5600-traffic-deck-coating-kit","title":"B-TUFF® 5600 4.5-gallon kit A Two Component, Solvent Free, Vehicular and Pedestrian Traffic Deck Coating","description":"\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eB-TUFF® 5600 | Two-Component Vehicular and Pedestrian Traffic Deck Coating\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eSolvent-Free, Two-Component Aliphatic Polyurethane Traffic Deck Coating\u003c\/strong\u003e | Brand: B-TUFF \/ PSI\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eB-TUFF® 5600 is a solvent-free, two-component, 100% solids aliphatic polyurethane traffic deck coating for vehicular and pedestrian deck applications. Designed for professional installers working on parkade, podium, and pedestrian deck systems. Confirm suitability, coverage, cure time, and system compatibility against the current TDS, SDS, and project specification before use.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eProfessional system note:\u003c\/strong\u003e B-TUFF 5600 is designed for use over a compatible B-TUFF 302 NG basecoat as part of a complete traffic deck system. Confirm the full system specification against the current TDS and project specification before use.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-component, 100% solids\u003c\/strong\u003e — requires accurate mixing at the ratio specified in the TDS; confirm pot life and application requirements before use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-free, low VOC\u003c\/strong\u003e — confirm ventilation requirements against the SDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAliphatic polyurethane chemistry\u003c\/strong\u003e — formulated for UV stability; confirm UV performance against the TDS for your specific exposure conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasion, impact, and chemical resistance properties\u003c\/strong\u003e — formulated for traffic deck applications; confirm load ratings, traffic suitability, and chemical compatibility against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatible\u003c\/strong\u003e — designed for use over B-TUFF 302 NG basecoat; confirm system compatibility against the current TDS before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicular traffic deck wearing course on parkade and parking structure decks\u003c\/li\u003e\n\u003cli\u003ePedestrian traffic deck coating on podium and plaza decks\u003c\/li\u003e\n\u003cli\u003eRamp and drive aisle wearing course\u003c\/li\u003e\n\u003cli\u003eExposed deck surfaces subject to UV, weathering, and chemical exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e\u003cbr\u003eTwo-component aliphatic polyurethane, 100% solids\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eVOC\u003c\/strong\u003e\u003cbr\u003eSolvent-free \/ Low VOC\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eUV Stability\u003c\/strong\u003e\u003cbr\u003eAliphatic formula — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eTraffic Suitability\u003c\/strong\u003e\u003cbr\u003eVehicular and pedestrian — confirm against TDS\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003cbr\u003eWearing course \/ top coat\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eCompatible Basecoat\u003c\/strong\u003e\u003cbr\u003eB-TUFF 302 NG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMust be applied over a compatible B-TUFF basecoat as part of an approved system — confirm system specification before use.\u003c\/li\u003e\n\u003cli\u003eDo not apply to damp, contaminated, or incompletely cured basecoat surfaces.\u003c\/li\u003e\n\u003cli\u003eDo not apply below minimum temperature or outside the humidity range specified in the TDS.\u003c\/li\u003e\n\u003cli\u003ePot life is temperature-dependent — confirm against the TDS before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:12px 16px;margin:16px 0;border-radius:4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Traffic Deck \u0026amp; Industrial Flooring Specialist, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size:0.85em;color:#777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"PSI","offers":[{"title":"Medium grey","offer_id":40256352551091,"sku":"","price":650.0,"currency_code":"CAD","in_stock":true},{"title":"Tan","offer_id":40256352583859,"sku":"","price":650.0,"currency_code":"CAD","in_stock":true},{"title":"White","offer_id":40256352616627,"sku":"","price":650.0,"currency_code":"CAD","in_stock":true},{"title":"Clear","offer_id":40256352649395,"sku":"","price":650.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/b-tuff-5600-45-gallon-kit-a-two-component-solvent-free-vehicular-and-pedestrian-traffic-deck-coating-2333457.jpg?v=1776710830"},{"product_id":"b-tuff-308-heavy-duty-floor-coating-parking-and-walking-waterproofing-deck-membrane","title":"B-TUFF® 308 | Heavy-Duty Urethane-Elastomer Waterproofing Deck Membrane 4.5 Gal Kit","description":"\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eB-TUFF® 308 | Heavy-Duty Urethane-Elastomer Waterproofing Deck Membrane\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eTwo-Component, Fast-Setting, Solvent-Free Urethane-Elastomer Waterproofing Base Membrane\u003c\/strong\u003e | Brand: Poly-Tuff Systems International\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eB-TUFF 308 is a two-component, fast-setting, rapid-curing, solvent-free, flexible, high-solids urethane-elastomer base membrane for vehicular parking decks, parkades, podium waterproofing, and metal roofs. Confirm suitability, coverage, cure time, and system compatibility against the current TDS, SDS, and project specification before use.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eProfessional system note:\u003c\/strong\u003e B-TUFF 308 is a base membrane and must be used as part of a complete approved system including compatible primer and wearing course. Confirm the full system specification against the current TDS and project specification before use.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-component, fast-setting\u003c\/strong\u003e — requires accurate mixing; confirm pot life, cure times, and application requirements against the current TDS before use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-temperature application\u003c\/strong\u003e — designed for application at temperatures as low as -6.7°C (20°F); confirm minimum application temperature and substrate temperature requirements against the current TDS before use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-free, high-solids\u003c\/strong\u003e — confirm VOC content and ventilation requirements against the SDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible urethane-elastomer\u003c\/strong\u003e — designed to accommodate substrate movement; confirm crack-bridging and flexibility performance against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-substrate compatibility\u003c\/strong\u003e — designed for use on concrete, metal, and other substrates; confirm substrate preparation requirements against the current TDS before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicular parking deck and parkade waterproofing base membrane\u003c\/li\u003e\n\u003cli\u003ePodium and portico waterproofing\u003c\/li\u003e\n\u003cli\u003eMetal roof waterproofing\u003c\/li\u003e\n\u003cli\u003eExposed deck waterproofing base coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMust be used as part of a complete approved system — confirm system specification before use.\u003c\/li\u003e\n\u003cli\u003eConfirm minimum application temperature and substrate temperature requirements against the current TDS before use in cold conditions.\u003c\/li\u003e\n\u003cli\u003eCure time is temperature and humidity dependent — confirm against the current TDS.\u003c\/li\u003e\n\u003cli\u003eConfirm substrate preparation requirements against the current TDS before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:12px 16px;margin:16px 0;border-radius:4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Waterproofing \u0026amp; Protective Coatings, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size:0.85em;color:#777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Poly-Tuff Systems International","offers":[{"title":"Default Title","offer_id":40584990326963,"sku":"","price":570.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/b-tuff-308-heavy-duty-floor-coating-parking-and-walking-waterproofing-deck-membrane-45-gal-kit-2466524.jpg?v=1776709567"},{"product_id":"aliphatic-top-coat-urethane-tcu","title":"ResinTech TCU Aliphatic Urethane Topcoat","description":"\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:6px;padding:12px 16px;margin:0 0 18px 0;\"\u003e\n  \u003cp style=\"margin:0;font-size:1.02em;color:#1C4F8A;\"\u003e\u003cstrong\u003e✅ Usually In Stock — North Vancouver, BC.\u003c\/strong\u003e Call 250-233-3000 to confirm availability or arrange pickup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eResinTech TCU Aliphatic Urethane Topcoat\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eTwo-Component, UV-Stable Aliphatic Urethane Topcoat\u003c\/strong\u003e | Brand: ResinTech | 6 L Kit\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eResinTech TCU is a two-component aliphatic urethane topcoat for epoxy, urethane and traffic coating systems. It is specified where improved abrasion resistance, gloss retention and UV stability are required compared with standard epoxy finishes. Confirm system compatibility, surface preparation, recoat window and slip-resistance requirements against the current ResinTech TDS, SDS and project specification before use.\u003c\/p\u003e\n\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:0 0 18px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eField\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eResinTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eProduct Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eTCU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eTwo-Component Aliphatic Urethane Topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eKit \/ Pack Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e6 L kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eColour \/ Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eClear gloss or clear satin — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eFinish \/ topcoat over ResinTech epoxy and urethane floor systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eSubstrate compatibility:\u003c\/strong\u003e Substrate compatibility must be confirmed against the current ResinTech TCU technical data sheet and project specification. Do not apply over existing roofing assemblies unless approved in writing by the manufacturer or project specifier.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eIndicative Technical Data\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eThe following data is provided for reference only. Always confirm current values against the manufacturer's TDS before specifying or ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eIndicative Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:30%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eNote\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e~800 sq.ft per 6 L kit\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eVaries with substrate and method — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e75.4 g\/L\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eConfirm against SDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003ePot Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e~60 min\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eTemperature-dependent — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eClear gloss or clear satin\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eConfirm sheen against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e6 L kit\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eBest-Use Applications\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eConfirm all applications against the current ResinTech TDS before specifying.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTopcoat over ResinTech epoxy and urethane floor systems\u003c\/li\u003e\n  \u003cli\u003eFinish coat in traffic coating and parkade deck assemblies as part of an approved system\u003c\/li\u003e\n  \u003cli\u003eIndustrial and commercial floor finish coat\u003c\/li\u003e\n  \u003cli\u003eProjects requiring UV stability and gloss retention over an epoxy base\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eSystem Compatibility\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eConfirm all system combinations against the current ResinTech TDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eSystem Layer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eCompatible Products\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eApplied Over\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003ca href=\"\/fr\/products\/transparent-universal-epoxy-100-solids-tue\" style=\"color:#1C4F8A;\"\u003eResinTech TUE\u003c\/a\u003e epoxy base coat and ResinTech urethane systems — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eAlternative Topcoats\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003ca href=\"\/fr\/products\/high-performance-polyaspartic-hpp\" style=\"color:#1C4F8A;\"\u003eResinTech HPP (polyaspartic)\u003c\/a\u003e, \u003ca href=\"\/fr\/products\/resintech-chemical-resistant-urethane-cru\" style=\"color:#1C4F8A;\"\u003eCRU (chemical-resistant urethane)\u003c\/a\u003e — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eNot Recommended For\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eApplication over existing roofing assemblies unless approved in writing — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eNotes \u0026amp; Limitations\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eAlways confirm application requirements against the current TDS, SDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eSurface \u0026amp; Substrate Compatibility\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cp\u003eApply only over a clean, sound, compatible coating system prepared in accordance with the current ResinTech TDS. Confirm substrate condition, surface preparation, recoat window and slip-resistance requirements against the TDS and project specification. Do not apply over existing roofing assemblies unless approved in writing by the manufacturer or project specifier.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eLimitations\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cul style=\"margin:0;\"\u003e\n    \u003cli\u003eMust be applied as part of a complete, approved ResinTech system — confirm system specification before use.\u003c\/li\u003e\n    \u003cli\u003ePot life and cure times are temperature-dependent — confirm against the current TDS.\u003c\/li\u003e\n    \u003cli\u003eCoverage varies with substrate porosity and application method — confirm against the TDS.\u003c\/li\u003e\n    \u003cli\u003eConfirm sheen level, recoat window and slip-resistance requirements against the TDS before specifying.\u003c\/li\u003e\n  \u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdiv style=\"border-left:4px solid #888;background:#f6f6f6;padding:14px 18px;margin:18px 0;border-radius:4px;color:#555;font-size:0.95em;\"\u003e\n  \u003cstrong\u003eDisclaimer:\u003c\/strong\u003e Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eTechnical Documentation\u003c\/strong\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003eRequest the current ResinTech TCU Technical Data Sheet (TDS) and Safety Data Sheets (SDS) from Canopus Supply before specifying or ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003chr\u003e\n\n\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:4px;padding:16px 20px;margin:20px 0;\"\u003e\n  \u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eTrade Purchasing Note\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 10px 0;\"\u003eAll sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.9em;color:#555;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eOrder Enquiries \u0026amp; Volume Orders\u003c\/strong\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003eFor volume orders, system compatibility questions, pickup timing or delivery across BC, contact Canopus Supply before placing a bulk order.\u003c\/p\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003e\u003cstrong\u003eCall:\u003c\/strong\u003e 1 (250) 233-3000\u003cbr\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e \u003ca href=\"mailto:order@canopussupply.com\"\u003eorder@canopussupply.com\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003ePickup:\u003c\/strong\u003e Unit 103, 185 Forester Street, North Vancouver, BC\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorised ResinTech Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e","brand":"ResinTech","offers":[{"title":"TCU – 6L Kit","offer_id":42537554182364,"sku":"","price":340.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/resintech-tcu-aliphatic-urethane-topcoat-2937426.png?v=1782375067"},{"product_id":"resintech-chemical-resistant-urethane-cru","title":"ResinTech CRU Chemical-Resistant Urethane Topcoat","description":"\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:6px;padding:12px 16px;margin:0 0 18px 0;\"\u003e\n  \u003cp style=\"margin:0;font-size:1.02em;color:#1C4F8A;\"\u003e\u003cstrong\u003e✅ Usually In Stock — North Vancouver, BC.\u003c\/strong\u003e Call 250-233-3000 to confirm availability or arrange pickup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eResinTech CRU Chemical-Resistant Urethane — Premium Protective Finish Coat\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eTwo-Component, High-Solids Aliphatic Polyurethane Finish Coat — Maximum Chemical, Abrasion \u0026amp; UV Protection\u003c\/strong\u003e | Brand: ResinTech | 6 L kit\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eResinTech CRU is a premium aliphatic polyurethane finish coat used as the final protective layer over compatible epoxy, polyaspartic, broadcast and traffic coating assemblies. It is for projects that need more than a standard topcoat: better long-term wear resistance, stronger chemical protection, excellent UV stability and a hard, cleanable finish. CRU is the thin durability layer of the ResinTech line — the final armour coat, not the build coat, membrane or fast-track coat. Confirm chemical exposure, surface preparation, system compatibility and cure schedule against the current ResinTech TDS, SDS and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eA ResinTech alternative to Tremco Vulkem 950NF \u0026amp; 951NF\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color:#444;\"\u003eResinTech CRU is stocked in North Vancouver and used in the same two-component polyurethane topcoat and chemical-resistant wearing-course applications. Product chemistry and system build differ between manufacturers — confirm suitability against the current ResinTech TDS before substituting. \u003cem style=\"color:#777;\"\u003eVulkem is a registered trademark of Tremco. Used for identification and comparison only; no affiliation or endorsement implied.\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left:4px solid #C94016;background:#fbf1ec;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#C94016;\"\u003eTwo critical application rules:\u003c\/strong\u003e\n  \u003col style=\"margin:8px 0 0 0;\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThin film only.\u003c\/strong\u003e Apply at 3–6 mils (recommended); never exceed 20 mils total. CRU is a thin finish coat and will fail in cure, appearance and adhesion above this thickness.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNot recoatable once cured.\u003c\/strong\u003e CRU is the final coat. If any material must go over cured CRU, the surface must be mechanically abraded (sanded) first for a physical bond only — cured CRU will not chemically recoat.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\u003c\/div\u003e\n\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:0 0 18px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eField\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eResinTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eProduct Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eCRU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eTwo-component, high-solids aliphatic polyurethane finish coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eKit \/ Pack Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e6 L kit — Part A 4 L + Part B 2 L (1.6 US gal mixed), pre-proportioned 2:1 by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eMix Ratio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003ePre-proportioned A + B kit as supplied — do not alter the ratio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eColour \/ Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eClear or field-pigmented; smooth, or slip-resistant when broadcast media is specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003ePremium protective finish — the final armour topcoat in ResinTech systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eWhere CRU sits in the system:\u003c\/strong\u003e CRU is the final armour coat of the ResinTech system — prime and bond with \u003ca href=\"\/fr\/products\/resintech-core-bond-epoxy-cbe-15l-4-gals\" style=\"color:#1C4F8A;\"\u003eCBE\u003c\/a\u003e, build with \u003ca href=\"\/fr\/products\/transparent-universal-epoxy-100-solids-tue\" style=\"color:#1C4F8A;\"\u003eTUE\u003c\/a\u003e, fast-finish with \u003ca href=\"\/fr\/products\/high-performance-polyaspartic-hpp\" style=\"color:#1C4F8A;\"\u003eHPP\u003c\/a\u003e, and protect it all with CRU — the strongest, most chemical-, abrasion- and UV-resistant topcoat in the line. Apply thin (3–6 mils) over compatible cured coatings; it is the final, non-recoatable layer. Confirm the system specification against the current ResinTech documentation.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eBest-Use Applications\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eConfirm all applications against the current ResinTech TDS before specifying.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium topcoat for parking decks, ramps, drive lanes, turning zones and service areas\u003c\/li\u003e\n  \u003cli\u003eFinal protective coat over sand, quartz, flake and reinforced traffic coating systems\u003c\/li\u003e\n  \u003cli\u003eCommercial, institutional, warehouse, mechanical room, automotive and light industrial floors\u003c\/li\u003e\n  \u003cli\u003eExterior or interior floors where UV stability, abrasion resistance and cleanability matter\u003c\/li\u003e\n  \u003cli\u003eBalconies, podium decks, walkways, corridors and amenity areas over compatible base systems\u003c\/li\u003e\n  \u003cli\u003eFood and beverage, service, utility and maintenance spaces exposed to routine cleaning chemicals\u003c\/li\u003e\n  \u003cli\u003eProtective clear or pigmented upgrade over HPP, TUE, CBE or other compatible cured coatings\u003c\/li\u003e\n  \u003cli\u003eParkade and strata restoration projects where long-term durability is valued over fastest cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eProduct Data\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eSource: ResinTech CRU Technical Data Sheet (TDS-CRU-1.0). Typical values at 23 °C and 50% RH unless noted. Confirm against the current TDS before specifying or ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:28%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eNote\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eComponents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eTwo — Part A resin + Part B hardener\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003ePre-proportioned kit as supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eFull kit or accurately measured proportions only\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eLow-speed mechanical mix 2–3 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSolids Content\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e92% by weight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D1353\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eChemistry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eHigh-solids aliphatic polyurethane\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003ePremium UV-stable protective finish chemistry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eClear or pigmented\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eUse compatible pigment \/ colorant where specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eOdour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eLow to moderate\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eVentilation required during application and cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eShelf Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e12 months\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eUnopened; stored properly at 10–30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003ePerformance Properties\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eTypical values from the ResinTech CRU TDS. Actual results depend on substrate, base coat, preparation, mixing, film build and conditions — confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:32%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTest Method \/ Note\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eBond Strength to Concrete\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e280 psi\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D4541; substrate and base coat control final adhesion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eTensile Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e5,800 psi\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eElongation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e4%\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eHard protective film; not a flexible membrane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eAbrasion Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e20 mg loss (best in the line)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D4060, CS-17 wheel, 1000 g, 1000 cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eShore Hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e75 D\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D2240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eTack-Free Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e8 hours\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D1640 typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eDrying Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e18 hours at 5 mils\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D1640, 24 °C \/ 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eUV Stability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eSuperb\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eSuitable as exposed interior \/ exterior protective topcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eSuperb\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003ePremium chemical-resistant finish coat in the ResinTech line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eReturn-to-Service Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eStandard\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003ePrioritizes long-term protection over fast cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eWorking Time, Recoat \u0026amp; Cure\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eCRU is a premium protection coat, not the fastest-return material — use HPP when speed is the priority, CRU when durability is. Confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eCondition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:32%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003ePractical Note\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eRecoat \/ Overcoat Window\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e4–6 hours (wet only)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eApply any second pass within this window. Once cured, abrade mechanically first.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eLight Foot Traffic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eAbout 24 hours\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eProtect from water, dust and early abuse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eVehicle Traffic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eAbout 72 hours\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eAllow longer in cool, damp or low-airflow conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eFull Cure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eAbout 7 days\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eDelay aggressive cleaning and chemical exposure until full cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eRain \/ Moisture Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eProtect during early cure\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eExterior work must be staged around weather and dew point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eCoverage \u0026amp; Film Build\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eTheoretical coverage per US gallon (6 L kit ≈ 1.6 US gal). Recommended film 3–6 mils; never exceed 20 mils total. Confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:40%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eUse Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Film Build\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003ePremium Upgrade Topcoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e4–6 mils\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e665–440 ft²\/US gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eMaximum-Protection Topcoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e5–10 mils\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e530–265 ft²\/US gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eClear Decorative Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e4–6 mils\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eDepends on flake \/ quartz profile and desired texture \/ gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSlip-Resistant Protective Coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e5–10 mils\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eBroadcast media, profile and backroll pressure control final texture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eEWS-X Protective Coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e5–10 mils\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eUse with light aluminum oxide or specified media where extra grip \/ wear is required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eApplication Conditions\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eConfirm all conditions against the current ResinTech TDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:40%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eCondition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eRequirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSubstrate Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10–30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eAmbient Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10–32 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eRelative Humidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eMaximum 85% recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eDew Point\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eSubstrate at least 3 °C above dew point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSubstrate Moisture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eDry concrete or compatible cured coating system; verify before coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eConcrete Age\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eNormally 28 days unless the designer approves earlier work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eMinimum Concrete Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e3,600 psi compressive and 220 psi tensile pull-off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eApplication Notes\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eAlways confirm application requirements against the current TDS, SDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eSurface Preparation\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cp\u003eApply only to clean, dry, sound substrates or compatible cured coatings. Remove dust, laitance, oil, grease, curing compounds, sealers, loose broadcast and bond breakers. Existing coatings must be sound, compatible and properly abraded — do not apply over glossy, soft, unknown or poorly bonded coatings. Mechanically prepare concrete to the profile required by the base system; for recoating cured resin, abrade uniformly to remove gloss. Vacuum thoroughly before coating. Moving joints must remain functional and be sealed separately with appropriate joint sealant. Confirm against the current TDS.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eMixing\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cp\u003eCondition material to application temperature before use. Pre-mix each component separately; add compatible pigment to Part A where a pigmented finish is required. Combine the supplied Part A and Part B in the correct pre-proportioned ratio and mix mechanically for 2–3 minutes at low speed until uniform. Scrape sides and bottom of the pail and avoid whipping air into the coating. Do not thin with solvents. Apply promptly after mixing and maintain a wet edge. Confirm against the current TDS.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eApplication \u0026amp; Overcoating\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cp\u003eApply by high-quality roller, squeegee and backroll, brush for details, or spray where appropriate; maintain an even film. Apply at 3–6 mils (recommended) and do not exceed 20 mils total — excessive thickness causes cure failure, blush and adhesion loss. \u003cstrong\u003eCRU is not recoatable after cure\u003c\/strong\u003e: sand \/ abrade the cured surface uniformly to achieve a mechanical bond before applying any subsequent material. For slip resistance, use specified silica sand, quartz, aluminum oxide or approved traction media. Apply clear coats thin and uniform over decorative systems, avoiding puddles that can alter gloss or cure. For pigmented coats, use consistent batching, backroll direction and film thickness; mock-ups are recommended for appearance-critical work. Protect fresh coating from rain, condensation, dust, foot traffic, tires and turning stress until sufficiently cured. Confirm against the current TDS.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eLimitations\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cul style=\"margin:0;\"\u003e\n    \u003cli\u003eDo not exceed 20 mils total film thickness — CRU is a thin finish coat (3–6 mils recommended) and will fail in cure, appearance and adhesion above this limit.\u003c\/li\u003e\n    \u003cli\u003eNot recoatable once cured — any subsequent coat or repair requires mechanical abrasion (sanding) of the cured surface for a physical bond only.\u003c\/li\u003e\n    \u003cli\u003eCRU is a finish coat — not a primer, build coat or crack-bridging membrane.\u003c\/li\u003e\n    \u003cli\u003eDo not apply to wet, frozen, dusty, contaminated or condensing substrates.\u003c\/li\u003e\n    \u003cli\u003eDo not apply over unknown or incompatible coatings without adhesion testing and approval.\u003c\/li\u003e\n    \u003cli\u003eSlip resistance depends on aggregate type, broadcast rate, film thickness and maintenance — approve texture by mock-up.\u003c\/li\u003e\n    \u003cli\u003eChemical resistance varies by concentration, temperature, exposure time and housekeeping — test severe exposures before use.\u003c\/li\u003e\n  \u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eTechnical Documentation\u003c\/strong\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003eRequest the current ResinTech CRU Technical Data Sheet (TDS) and Safety Data Sheets (SDS) from Canopus Supply before specifying or ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003chr\u003e\n\n\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:4px;padding:16px 20px;margin:20px 0;\"\u003e\n  \u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eTrade Purchasing Note\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 10px 0;\"\u003eAll sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.9em;color:#555;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eOrder Enquiries \u0026amp; Volume Orders\u003c\/strong\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003eFor volume orders, system compatibility questions, pickup timing or delivery across BC, contact Canopus Supply before placing a bulk order.\u003c\/p\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003e\u003cstrong\u003eCall:\u003c\/strong\u003e 1 (250) 233-3000\u003cbr\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e \u003ca href=\"mailto:order@canopussupply.com\"\u003eorder@canopussupply.com\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003ePickup:\u003c\/strong\u003e Unit 103, 185 Forester Street, North Vancouver, BC\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorised ResinTech Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e","brand":"ResinTech","offers":[{"title":"CRU","offer_id":46633077702876,"sku":null,"price":340.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/resintech-cru-chemical-resistant-urethane-topcoat-9749460.png?v=1782209227"},{"product_id":"resintech-flexcoat-pu-polyurethane-waterproofing-membrane","title":"ResinTech FLEXCOAT-PU Single-Component Polyurethane Waterproofing Membrane","description":"\u003cdiv style=\"border: 1px solid #1C4F8A; background: #eef4fa; border-radius: 6px; padding: 12px 16px; margin: 0 0 18px 0;\"\u003e\n\u003cp style=\"margin: 0; font-size: 1.02em; color: #1c4f8a;\"\u003e\u003cstrong\u003eStocked by Canopus Supply — North Vancouver, BC.\u003c\/strong\u003e Call 250-233-3000 to confirm current availability or arrange pickup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eResinTech FLEXCOAT-PU Flexible Polyurethane Waterproofing \u0026amp; Crack-Bridging Base Membrane\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eSingle-Component, High-Solids Elastomeric Polyurethane Waterproofing \u0026amp; Crack-Bridging Base Membrane\u003c\/strong\u003e | Brand: ResinTech | ResinTech product code: FPU\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eResinTech FLEXCOAT-PU is a single-component, high-solids elastomeric polyurethane membrane used where the coating system needs flexibility, waterproofing and crack-bridging below the exposed wear surface. It is the movement-control layer of the ResinTech line: applied to the prepared substrate, it helps protect against normal cracking and water intrusion. It is \u003cstrong\u003enot the final wear coat\u003c\/strong\u003e — it must be protected by an approved ResinTech wearing course. Confirm build thickness, primer requirements, detailing, cure and compatible protection layers against the current ResinTech TDS, SDS and project specification before use.\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003e\u003cstrong\u003eA ResinTech Alternative to Tremco Vulkem \u0026amp; Sikalastic Deck Membranes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eComparing polyurethane deck and waterproofing base membranes? ResinTech FLEXCOAT-PU is a single-component, high-elongation (800%), crack-bridging PU base membrane used in the same base-coat waterproofing and traffic-deck applications as Tremco Vulkem 350NF, Vulkem 350 FC and Vulkem 360NF, and Sika Sikalastic M 200 (M-200). Like those products, it works as a flexible, movement-accommodating base layer beneath an approved wearing course on balconies, podium decks, parkades and rooftop decks — a locally stocked ResinTech alternative for contractors specifying or replacing a polyurethane deck membrane in Metro Vancouver and across British Columbia.\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eProduct chemistry, coverage, elongation and system build differ between manufacturers, so always confirm suitability, compatibility and substrate requirements against the current ResinTech TDS and your project specification before substituting any product. \u003cem\u003eVulkem is a registered trademark of Tremco; Sikalastic is a registered trademark of Sika. These names are used for identification and comparison only and do not imply any affiliation with or endorsement by their owners.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 0 0 18px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eField\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eResinTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eProduct Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eFLEXCOAT-PU (ResinTech code: FPU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eSingle-component elastomeric polyurethane waterproofing \u0026amp; crack-bridging membrane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e20 kg pail (kit volume to be confirmed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eReady to use — stir until uniform; no A + B mixing required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eFlexible base \/ movement \u0026amp; waterproofing layer — protected on top by an approved ResinTech wearing course\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eWhere FLEXCOAT-PU sits in the system:\u003c\/strong\u003e FLEXCOAT-PU is the flexible foundation \/ movement layer — \u003cstrong\u003enot the wear surface\u003c\/strong\u003e. Apply it to the prepared substrate, then build and protect on top with the approved ResinTech wearing course: \u003ca href=\"\/fr\/products\/resintech-core-bond-epoxy-cbe-15l-4-gals\" style=\"color: #1c4f8a;\"\u003eCBE\u003c\/a\u003e \/ \u003ca href=\"\/fr\/products\/transparent-universal-epoxy-100-solids-tue\" style=\"color: #1c4f8a;\"\u003eTUE\u003c\/a\u003e epoxy build coats, then an \u003ca href=\"\/fr\/products\/high-performance-polyaspartic-hpp\" style=\"color: #1c4f8a;\"\u003eHPP\u003c\/a\u003e fast-cure UV-stable finish or \u003ca href=\"\/fr\/products\/resintech-chemical-resistant-urethane-cru\" style=\"color: #1c4f8a;\"\u003eCRU\u003c\/a\u003e topcoat (or broadcast, tile, screed or protection board). Never leave the membrane exposed to UV, traffic or chemicals. Confirm the exact layer sequence and primer requirements against the current ResinTech system specification.\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eBest-Use Applications\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eConfirm all applications against the current ResinTech TDS before specifying.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBalcony, podium, plaza and rooftop deck waterproofing under approved protection systems\u003c\/li\u003e\n\u003cli\u003eCrack-bridging base membrane below ResinTech traffic coatings where movement accommodation is required\u003c\/li\u003e\n\u003cli\u003eParking deck waterproofing below approved aggregate, reinforced or traffic-bearing wearing courses\u003c\/li\u003e\n\u003cli\u003eWet-area waterproofing under compatible tile, screed or protection layers\u003c\/li\u003e\n\u003cli\u003eDetail membrane around drains, corners, wall\/floor transitions, pipe penetrations and static cracks\u003c\/li\u003e\n\u003cli\u003eStrata, parkade, balcony and podium restoration where water control and movement risk matter\u003c\/li\u003e\n\u003cli\u003eProtected below-grade, foundation, retaining wall and masonry waterproofing after proper preparation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eProduct Data\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eSource: ResinTech FPU Technical Data Sheet (TDS-FPU-1.0). Typical values at 23 °C and 50% RH unless noted. Confirm against the current TDS before specifying or ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 28%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eNote\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eComponents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eSingle component\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eMoisture-curing polyurethane; stir before use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eChemistry\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003ePolyurethane waterproofing membrane\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eIsocyanate \/ polyether-polyol based\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSolids Content\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e98% by weight\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D1353; high-solids, solvent-free grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eLiquid-applied coating\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eColour subject to production availability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eLow — solvent-free grade\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eConfirm current SDS for regulatory g\/L reporting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eApplication Methods\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eRoller, brush, scraper\/squeegee or approved airless spray\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eUse a wet-film gauge during application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e20 kg pail\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eKit volume to be confirmed; other sizes subject to availability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eShelf Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e12 months\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eUnopened, stored properly at 5–35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003ePerformance Properties\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eTypical values from the ResinTech FPU TDS. Actual results depend on substrate, preparation, detailing, film build and conditions — confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 32%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eTest Method \/ Note\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eBond Strength to Concrete\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e150 psi\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D4541; surface prep and primer control final adhesion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eTensile Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e300 psi\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eElongation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e800%\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D412; flexible membrane function\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eTear Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e≈ 86 lbf\/in (15 N\/mm)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D624\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eShore Hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e65 A\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D2240; elastomeric, not a Shore D hardcoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eTack-Free Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e8 hours\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D1640 typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eDrying Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e20 hours at 15 mils\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D1640, 24 °C \/ 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eWatertightness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e≈ 44 psi for 120 min, watertight\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eEN 1928 (0.3 MPa)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eLow-Temperature Flexibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e−35 °C, no cracking\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D522\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eUV Stability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eLimited\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eRequires an approved UV-stable topcoat or protection if exposed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eLimited\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eUse a protected system design for chemical or abrasive service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eCoverage \u0026amp; Film Build\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eCoverage per 20 kg kit is approximate (based on ≈1.3–1.5 kg\/m² per mm DFT on a smooth substrate). Kit volume is still to be confirmed — verify actual yield by mock-up. Confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eFilm Build\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003e≈ Coverage \/ 20 kg Kit\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eTraffic Crack-Bridge Base\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e20–25 mils\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e≈ 300–240 ft²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eEnhanced Movement Base\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e40–50 mils\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e≈ 150–120 ft² (balconies, podiums, rooftop decks, over occupied spaces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eProtected Waterproofing Membrane\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e1.0–1.5 mm (≈40–60 mils)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e≈ 155–105 ft²; apply in 2–3 coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eMaximum Coat Thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e0.7 mm (≈28 mils) wet per coat\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eThicker coats increase bubbling, skinning or slow-cure risk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eApplication Conditions\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eConfirm all conditions against the current ResinTech TDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 40%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eCondition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eRequirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSubstrate Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e5–35 °C during application and cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eAmbient Conditions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eDry, stable; protect from rain, condensation and water exposure before cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eDew Point\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eSubstrate at least 3 °C above dew point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSubstrate Condition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eStructurally sound, stable, clean, smooth and dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eConcrete Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e3,600 psi compressive and 220 psi tensile pull-off recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eRecoat Interval\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eTypically 8–12 hours between coats, depending on film build, temperature, humidity and ventilation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSubsequent Protection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eAllow membrane to dry before applying topcoat, broadcast, tile, screed or protection layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eApplication Notes\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eAlways confirm application requirements against the current TDS, SDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eSurface Preparation\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cp\u003eSubstrate must be sound, stable, clean, smooth and dry before application. Remove dust, laitance, grease, oils, curing compounds, loose coatings, standing water and bond breakers. Grind high spots and repair holes, honeycombs, cracks, sharp transitions and surface defects before coating. Prime porous, marginal, moisture-risk or project-specified substrates with a ResinTech-approved primer. Existing coatings require compatibility and adhesion testing before overcoating. Do not apply over damp, frozen, contaminated, incompatible or unprepared substrates. Confirm all requirements against the current TDS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eMixing\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cp\u003eStir thoroughly with a low-speed mixer until uniform. Avoid entraining air. Do not thin unless approved in writing. Confirm mixing procedure against the current TDS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eApplication Method\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cp\u003ePre-treat details first — corners, drains, wall\/floor junctions, penetrations, static cracks and transitions — with an extra coat or reinforcement fabric. Apply the field coat evenly by roller, brush, rubber scraper\/squeegee or approved spray in 2–3 coats, each coat perpendicular to the previous where practical to reduce pinholes. Check wet film thickness, pinholes, voids, thin spots and contamination before the next coat or protection layer. Where subsequent tile, plaster, mortar or screed bonding is required, broadcast clean dry fine sand into the final uncured coat. Confirm method against the current TDS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eLimitations\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cul style=\"margin: 0;\"\u003e\n\u003cli\u003eNot intended as a final exposed wear surface by itself — must be covered by an approved wearing course.\u003c\/li\u003e\n\u003cli\u003eUV-exposed applications require an approved UV-stable topcoat or protection system.\u003c\/li\u003e\n\u003cli\u003ePedestrian or vehicular traffic requires an approved wearing course, aggregate system or protection layer.\u003c\/li\u003e\n\u003cli\u003eDo not bridge expansion joints or active movement joints with field membrane alone — movement joints require a project-specific detail and must remain functional.\u003c\/li\u003e\n\u003cli\u003eDo not exceed 0.7 mm (≈28 mils) wet film per coat unless approved by ResinTech.\u003c\/li\u003e\n\u003cli\u003eDo not use for potable water, tank, pool, submerged or aggressive chemical service unless the full system is specifically approved.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdiv style=\"border-left: 4px solid #888; background: #f6f6f6; padding: 14px 18px; margin: 18px 0; border-radius: 4px; color: #555; font-size: 0.95em;\"\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e Isocyanate-based uncured material. Read the SDS before use; wear gloves, eye protection and protective clothing and provide ventilation. The cured membrane must be protected from traffic, abrasion, UV, backfill, sharp damage and contamination by approved system layers. Disposal per local regulations.\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTechnical Documentation\u003c\/h2\u003e\n\u003cp style=\"margin: 8px 0 12px 0; color: #444;\"\u003eDownload the current ResinTech FLEXCOAT-PU Technical Data Sheet (TDS) and Safety Data Sheet (SDS). Confirm all values against the current documentation before specifying or ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv style=\"border: 1px solid #1C4F8A; background: #eef4fa; border-radius: 4px; padding: 16px 20px; margin: 20px 0;\"\u003e\n\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTrade Purchasing Note\u003c\/h2\u003e\n\u003cp style=\"margin: 0 0 10px 0;\"\u003eAll sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 0.9em; color: #555;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eOrder Enquiries \u0026amp; Volume Orders\u003c\/strong\u003e\n\u003cp style=\"margin: 8px 0 0 0;\"\u003eFor volume orders, system compatibility questions, pickup timing or delivery across BC, contact Canopus Supply before placing a bulk order.\u003c\/p\u003e\n\u003cp style=\"margin: 8px 0 0 0;\"\u003e\u003cstrong\u003eCall:\u003c\/strong\u003e 1 (250) 233-3000\u003cbr\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e \u003ca href=\"mailto:order@canopussupply.com\"\u003eorder@canopussupply.com\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003ePickup:\u003c\/strong\u003e Unit 103, 185 Forester Street, North Vancouver, BC\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorised ResinTech Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e","brand":"ResinTech","offers":[{"title":"Default Title","offer_id":51339606524124,"sku":null,"price":320.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/resintech-flexcoat-pu-single-component-polyurethane-waterproofing-membrane-6359644.png?v=1782209227"}],"url":"https:\/\/www.canopussupply.com\/fr\/collections\/polyurethane-coatings.oembed","provider":"Canopus Supply Inc","version":"1.0","type":"link"}