{"title":"Revêtements époxy","description":"\u003ch2\u003eEpoxy Floor Coatings for Commercial \u0026amp; Industrial Applications\u003c\/h2\u003e\n\u003cp\u003eHigh-build epoxy floor coatings formulated for commercial, industrial, and institutional environments across British Columbia. Canopus Supply stocks 100% solids epoxy base coats, water-based primers, and self-levelling systems suited for warehouses, manufacturing facilities, commercial garages, and institutional floors throughout Metro Vancouver and the Lower Mainland.\u003c\/p\u003e\n\u003cp\u003eEpoxy system performance depends on substrate condition, surface profile, ambient temperature, humidity, and application method. Confirm product suitability against the current TDS, SDS, and project specification before ordering.\u003c\/p\u003e\n\u003ch3\u003eSystem Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Build Base Coats\u003c\/strong\u003e — 100% solids epoxy formulas designed for high film build and low VOC; confirm coverage rates and application thickness against the current TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical Resistance Properties\u003c\/strong\u003e — Epoxy systems formulated with resistance to common industrial chemicals, oils, and fuels; confirm chemical compatibility against the TDS and project specification before use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to Concrete\u003c\/strong\u003e — Designed for adhesion to properly prepared concrete substrates; final adhesion depends on substrate condition, surface profile (CSP), moisture content, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Versatility\u003c\/strong\u003e — Available in primer, base coat, and broadcast configurations for a range of commercial and industrial floor applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWarehouses and distribution centres\u003c\/li\u003e\n\u003cli\u003eManufacturing and industrial facilities\u003c\/li\u003e\n\u003cli\u003eCommercial and institutional garages\u003c\/li\u003e\n\u003cli\u003eRetail and commercial floors\u003c\/li\u003e\n\u003cli\u003eInstitutional and healthcare facilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Selection Support\u003c\/h3\u003e\n\u003cp\u003eEpoxy system selection depends on substrate condition, traffic type, chemical exposure, and topcoat requirements. Contact Canopus Supply for product information and technical data sheets before ordering.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;color:#14263F;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;color:#14263F;\"\u003e\n\u003cstrong\u003eTechnical Disclaimer:\u003c\/strong\u003e Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003eCanopus Supply Inc. — Industrial Coatings \u0026amp; Waterproofing Specialists, Metro Vancouver \u0026amp; BC\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2 style=\"margin-top: 2em;\"\u003eContractor FAQ — Epoxy Coatings\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between 100% solids epoxy and water-based epoxy?\u003c\/h3\u003e\n\u003cp\u003e100% solids epoxy delivers higher film build per coat and lower VOC emissions, making it common for industrial and commercial floor applications requiring durability and chemical resistance. Water-based epoxy is typically used as a primer or in environments where VOC restrictions apply. Confirm product selection against the current TDS and project specification before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes epoxy require a primer coat?\u003c\/h3\u003e\n\u003cp\u003eMost commercial epoxy systems require a primer coat to promote adhesion to the concrete substrate, particularly on porous, contaminated, or moisture-affected slabs. Confirm primer requirements against the current manufacturer documentation and project specification before installation.\u003c\/p\u003e\n\u003ch3\u003eWhat surface preparation is required before applying epoxy?\u003c\/h3\u003e\n\u003cp\u003eConcrete substrates must be clean, dry, and profiled to the manufacturer's specified Concrete Surface Profile (CSP) before epoxy application. Surface preparation method — shot blasting, diamond grinding, or scarifying — depends on substrate condition and the specified system. Confirm preparation requirements against the current TDS before work begins.\u003c\/p\u003e\n\u003ch3\u003eCan epoxy be used as a standalone topcoat in UV-exposed areas?\u003c\/h3\u003e\n\u003cp\u003eAromatic epoxy systems are not formulated for UV stability and will amber or chalk in UV-exposed environments. Aliphatic polyaspartic or urethane topcoats are typically specified for UV-exposed areas. Confirm topcoat requirements against the current TDS and project specification.\u003c\/p\u003e\n\u003ch3\u003eCan contractors pick up epoxy products in North Vancouver?\u003c\/h3\u003e\n\u003cp\u003eContractor pickup is available from Canopus Supply in North Vancouver. Contact the store before placing volume orders to confirm stock, pickup timing and system components.\u003c\/p\u003e","products":[{"product_id":"sherwin-williams-eco-hts-100","title":"Sherwin-Williams Eco-HTS™ 100 | High-Tensile Strength Floor Coating","description":"\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eSherwin-Williams Eco-HTS™ 100 | High-Tensile Strength Floor Coating\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eTwo-Component High-Tensile Strength Floor Coating for Commercial \u0026amp; Industrial Concrete\u003c\/strong\u003e | Brand: Sherwin-Williams\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eSherwin-Williams Eco-HTS™ 100 is a two-component, 100% solids, solvent-free floor coating formulated for demanding commercial and industrial concrete floor applications. Designed for professional installers and facility managers requiring a tough, durable floor coating on properly prepared concrete substrates. Confirm chemistry, suitability, coverage, and system compatibility against the current Sherwin-Williams TDS, SDS, and project specification before use.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eProfessional note:\u003c\/strong\u003e Eco-HTS™ 100 requires thorough substrate preparation — concrete must be mechanically profiled, clean, dry, and free of laitance, oil, and curing compounds. \u003cstrong\u003eMoisture testing is essential\u003c\/strong\u003e before application. Confirm suitability for your specific application and substrate against the current TDS before use.\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eEco-HTS™ 100 is a 100% solids, two-component floor coating that cures to a hard, seamless, high-build surface. Its high-tensile strength formulation is designed to resist cracking, impact, and abrasion under heavy foot and light vehicular traffic; confirm load ratings and traffic suitability against the current TDS. The solvent-free chemistry minimizes VOC emissions during application; confirm ventilation requirements against the SDS.\u003c\/p\u003e\n\n\u003cp\u003eOnce cured, Eco-HTS™ 100 provides a smooth, cleanable surface with resistance to a range of chemicals, oils, and cleaning agents; confirm chemical compatibility against the TDS and project specification before use. It can be used as a standalone floor coating or as a base coat in a multi-layer system incorporating decorative flake, quartz broadcast, or a polyurethane or polyaspartic topcoat; confirm system compatibility against the TDS before ordering.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh tensile strength\u003c\/strong\u003e — formulated to resist cracking, impact, and surface stress; confirm load ratings against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% solids, solvent-free\u003c\/strong\u003e — low VOC; confirm ventilation requirements against the SDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, high-build finish\u003c\/strong\u003e — creates a continuous, cleanable floor surface; final appearance depends on substrate condition and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance properties\u003c\/strong\u003e — formulated with resistance to common industrial chemicals, oils, and cleaning agents after cure; confirm chemical compatibility against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to concrete\u003c\/strong\u003e — designed for adhesion to mechanically prepared concrete substrates; final adhesion depends on substrate condition, surface profile (CSP), moisture content, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem versatile\u003c\/strong\u003e — compatible with decorative flake, quartz broadcast, and polyurethane or polyaspartic topcoats; confirm system compatibility against the TDS before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIndustrial and commercial concrete floor coatings\u003c\/li\u003e\n\u003cli\u003eWarehouse and manufacturing facility floors\u003c\/li\u003e\n\u003cli\u003eGarage and parkade floor base coats\u003c\/li\u003e\n\u003cli\u003eInstitutional facility floors\u003c\/li\u003e\n\u003cli\u003eBase coat for decorative flake or quartz broadcast systems\u003c\/li\u003e\n\u003cli\u003eBase coat under polyurethane or polyaspartic topcoat systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eComponents\u003c\/strong\u003e\u003cbr\u003eTwo-component, 100% solids\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eVOC\u003c\/strong\u003e\u003cbr\u003eSolvent-free \/ Low VOC\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e\u003cbr\u003eSeamless, high-build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eTraffic\u003c\/strong\u003e\u003cbr\u003eFoot and light vehicular — confirm against TDS\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003eRoller or squeegee\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003cbr\u003eBase coat or standalone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eConcrete must be mechanically profiled (shot-blasted or ground to the CSP specified in the TDS), clean, dry, and free of laitance, oil, grease, curing compounds, and incompatible coatings. Conduct moisture testing before application. Repair cracks and voids with a compatible repair mortar. Confirm primer requirements against the TDS before application.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eApplication Instructions\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e Mechanically profile and clean the concrete as described above. Confirm moisture levels are within acceptable limits per the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e Combine Part A and Part B at the ratio specified in the TDS. Mix thoroughly with a low-speed mixer for the full recommended time. Do not thin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Pour mixed material onto the floor and spread evenly with a notched squeegee. Back-roll immediately with a phenolic-core roller to achieve uniform film build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast (if applicable):\u003c\/strong\u003e For flake or quartz systems, broadcast aggregate into the wet coating to refusal. Remove excess after cure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcoat (if applicable):\u003c\/strong\u003e Apply an approved polyurethane or polyaspartic topcoat within the recoat window specified in the TDS.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNot UV stable — requires a UV-stable topcoat for exposed or sunlit areas; confirm against TDS.\u003c\/li\u003e\n\u003cli\u003eDo not apply to damp, contaminated, or unsound concrete.\u003c\/li\u003e\n\u003cli\u003eDo not apply below minimum temperature or when substrate temperature is within 3°C of the dew point; confirm temperature requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003eNot recommended for areas subject to continuous water immersion without system approval.\u003c\/li\u003e\n\u003cli\u003ePot life is temperature-dependent — work in manageable batches in warm conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eHealth \u0026amp; Safety\u003c\/h2\u003e\n\u003cp\u003eRead the current Safety Data Sheet (SDS) before use. Wear gloves, eye protection, and ensure adequate ventilation during mixing and application. Refer to the SDS for full hazard classification and first-aid measures.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:12px 16px;margin:16px 0;border-radius:4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\n\u003cp style=\"font-size:0.85em;color:#777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAvailable at Canopus Supply — North Vancouver, BC.\u003c\/em\u003e\u003c\/p\u003e","brand":"Sherwin-Williams","offers":[{"title":"1.1 Gallon","offer_id":40165305516211,"sku":"","price":350.0,"currency_code":"CAD","in_stock":true},{"title":"5.5 Gallon","offer_id":40165306433715,"sku":"","price":1400.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/eco-hts-100-2280653.jpg?v=1776710893"},{"product_id":"eco-mpe-multi-purpose-epoxy","title":"Eco-MPE™ Multi-Purpose Epoxy","description":"\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eEco-MPE™ Multi-Purpose Epoxy\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eVersatile, Solvent-Free Two-Component Epoxy System\u003c\/strong\u003e | Brand: Eco\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eEco-MPE™ is a versatile, solvent-free, two-component epoxy system for concrete floor coating, priming, and bonding applications. Its multi-purpose formulation is designed for contractors and facility managers who need a single epoxy product that can be used across different substrate conditions and system requirements. Confirm suitability, coverage, cure time, and system compatibility against the current TDS, SDS, and project specification before use.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eProfessional note:\u003c\/strong\u003e Substrate preparation is critical. Concrete must be mechanically profiled, clean, dry, and free of laitance, oil, and curing compounds. \u003cstrong\u003eMoisture testing is essential\u003c\/strong\u003e before application. Confirm suitability for your specific application and substrate against the current TDS before use.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eEco-MPE™ is a 100% solids, two-component epoxy that cures to a hard, durable film. Its formulation allows it to be used as a penetrating primer on porous or lightly profiled concrete, a mid-build coating in multi-layer floor systems, or a bonding agent for overlays and toppings; confirm the appropriate application rate and method against the current TDS for each use case. The solvent-free chemistry minimizes VOC emissions; confirm ventilation requirements against the SDS.\u003c\/p\u003e\n\n\u003cp\u003eOnce cured, Eco-MPE™ provides a smooth, cleanable surface with resistance to oils, mild chemicals, and cleaning agents; confirm chemical compatibility against the TDS and project specification. It is designed for use with decorative flake and quartz broadcast systems and can be topcoated with polyurethane or polyaspartic finishes; confirm system compatibility against the TDS before ordering.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-purpose formulation\u003c\/strong\u003e — designed for use as a primer, mid-build coat, or bonding agent; confirm the appropriate application rate and method against the TDS for each use case.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% solids, solvent-free\u003c\/strong\u003e — low VOC; confirm ventilation requirements against the SDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to concrete\u003c\/strong\u003e — designed for adhesion to mechanically prepared concrete substrates; final adhesion depends on substrate condition, surface profile, moisture content, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance properties\u003c\/strong\u003e — formulated with resistance to common industrial chemicals, oils, and cleaning agents after cure; confirm chemical compatibility against the TDS and project specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, cleanable finish\u003c\/strong\u003e — creates a continuous floor surface; final appearance depends on substrate condition and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatible\u003c\/strong\u003e — designed for use with decorative flake, quartz broadcast, and polyurethane or polyaspartic topcoat systems; confirm system compatibility against the TDS before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication methods\u003c\/strong\u003e — roller, squeegee, or brush; confirm the appropriate method and coverage rate against the TDS for each use case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePenetrating epoxy primer on porous or lightly profiled concrete\u003c\/li\u003e\n\u003cli\u003eMid-build floor coating in multi-layer epoxy systems\u003c\/li\u003e\n\u003cli\u003eBonding agent for cementitious overlays and toppings\u003c\/li\u003e\n\u003cli\u003eCommercial and light industrial concrete floor coatings\u003c\/li\u003e\n\u003cli\u003eBase coat for decorative flake or quartz broadcast systems\u003c\/li\u003e\n\u003cli\u003eGarage, warehouse, and institutional floor coatings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e\u003cbr\u003eTwo-component epoxy, 100% solids\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eVOC\u003c\/strong\u003e\u003cbr\u003eSolvent-free \/ Low VOC\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003cbr\u003ePrimer, mid-build, or bonding agent — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eTraffic Suitability\u003c\/strong\u003e\u003cbr\u003eFoot and light vehicular — confirm against TDS\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003eRoller, squeegee, or brush\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eUV Stability\u003c\/strong\u003e\u003cbr\u003eNot UV stable — topcoat required for exposed areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eConcrete must be mechanically profiled (shot-blasted or ground to the CSP specified in the TDS), clean, dry, and free of laitance, oil, grease, curing compounds, and incompatible coatings. Conduct moisture testing before application. Repair cracks and voids with a compatible repair mortar prior to coating.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eApplication Instructions\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e Profile and clean the concrete as described above. Confirm moisture levels are within acceptable limits per the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e Combine Part A and Part B at the ratio specified in the TDS. Mix thoroughly with a low-speed mixer for the full recommended time. Do not thin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimer application (if used as primer):\u003c\/strong\u003e Apply at a thin, penetrating rate by roller or brush per the TDS. Allow to tack before applying subsequent coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating application:\u003c\/strong\u003e Pour mixed material onto the floor and spread evenly with a notched squeegee. Back-roll immediately with a phenolic-core roller for uniform film build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast (if applicable):\u003c\/strong\u003e For flake or quartz systems, broadcast aggregate into the wet coating to refusal. Remove excess after cure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcoat (if applicable):\u003c\/strong\u003e Apply an approved polyurethane or polyaspartic topcoat within the recoat window specified in the TDS.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNot UV stable — requires a UV-stable topcoat for exposed or sunlit areas.\u003c\/li\u003e\n\u003cli\u003eDo not apply to damp, contaminated, or unsound concrete.\u003c\/li\u003e\n\u003cli\u003eDo not apply below minimum temperature or when substrate temperature is within 3°C of the dew point; confirm temperature requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003ePot life is temperature-dependent — work in manageable batches in warm conditions; confirm pot life against the TDS.\u003c\/li\u003e\n\u003cli\u003eNot recommended for areas subject to continuous water immersion without system approval.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eStorage \u0026amp; Shelf Life\u003c\/h2\u003e\n\u003cp\u003eStore in original, unopened containers in a cool, dry area away from direct sunlight and freezing. Confirm shelf life and storage temperature requirements against the current TDS and product label.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eHealth \u0026amp; Safety\u003c\/h2\u003e\n\u003cp\u003eRead the current Safety Data Sheet (SDS) before use. Contains epoxy resins and amine hardeners — wear gloves, eye protection, and ensure adequate ventilation during mixing and application. Refer to the SDS for full hazard classification and first-aid measures.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eCan Eco-MPE™ be used as both a primer and a floor coating?\u003c\/h3\u003e\n\u003cp\u003eIts multi-purpose formulation is designed to be applied at a thin, penetrating rate as a primer on porous concrete, or at a higher build rate as a mid-coat or standalone floor coating. Confirm the appropriate application rate and method against the current TDS for each use case.\u003c\/p\u003e\n\n\u003ch3\u003eIs it UV stable?\u003c\/h3\u003e\n\u003cp\u003eNo. Like most epoxy systems, Eco-MPE™ will amber and chalk under UV exposure. For exterior or sunlit areas, apply an approved UV-stable polyurethane or polyaspartic topcoat over the cured epoxy.\u003c\/p\u003e\n\n\u003ch3\u003eWhat decorative systems is it compatible with?\u003c\/h3\u003e\n\u003cp\u003eEco-MPE™ is designed for use with vinyl flake and quartz broadcast decorative systems. Confirm system compatibility against the current TDS before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the pot life after mixing?\u003c\/h3\u003e\n\u003cp\u003ePot life is temperature-dependent. Work in manageable batch sizes, especially in warm conditions. Refer to the current TDS for specific pot life and working time at different temperatures.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:12px 16px;margin:16px 0;border-radius:4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Concrete Coatings \u0026amp; Industrial Flooring Specialist, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size:0.85em;color:#777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Sherwin-Williams","offers":[{"title":"3 gallon kit","offer_id":40081334632627,"sku":"","price":300.0,"currency_code":"CAD","in_stock":true},{"title":"15 gallon kit","offer_id":40081334665395,"sku":"","price":1450.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/eco-mpe-multi-purpose-epoxy-4843055.jpg?v=1776710892"},{"product_id":"tremco-epoxy-primer","title":"Tremco® Epoxy Primer | Two-Component Tie-In Primer for Waterproofing \u0026 Air Barrier Systems","description":"\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTremco® Epoxy Primer | Two-Component Tie-In Primer\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eTwo-Component (1:1) Epoxy Tie-In Primer for Waterproofing Membranes \u0026amp; Air Barriers\u003c\/strong\u003e | Brand: Tremco\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eTremco® Epoxy Primer is a two-component (1:1) primer used as a compatible tie-in to create connectivity between TREMproof® below-grade \u003ca href=\"\/fr\/collections\/waterproofing-products\" title=\"Waterproofing Products\"\u003ewaterproofing membranes\u003c\/a\u003e, Vulkem® urethane coatings, and ExoAir® air barrier membranes. Confirm suitability, coverage, cure time, and system compatibility against the current Tremco TDS, SDS, and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border: 1px dashed #1C4F8A; background: #f4f8fc; padding: 14px 18px; margin: 18px 0; border-radius: 6px;\"\u003e\n\u003cspan style=\"display:inline-block; font-size:0.75em; font-weight:700; letter-spacing:0.5px; color:#1C4F8A; text-transform:uppercase; margin-bottom:6px;\"\u003eAlso available — ResinTech alternative\u003c\/span\u003e\n\u003cp style=\"margin:0; color:#444;\"\u003ePrefer a locally stocked alternative? \u003ca href=\"\/fr\/products\/transparent-universal-epoxy-100-solids-tue\" style=\"color:#1C4F8A; font-weight:600;\"\u003eResinTech TUE Transparent Universal Epoxy\u003c\/a\u003e is a 100%-solids transparent epoxy primer, bond and build coat, stocked in North Vancouver and used in the same epoxy primer, bond-coat and tie-in applications. Product chemistry and system build differ between manufacturers — confirm suitability against the current ResinTech TDS before substituting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eComponents\u003c\/strong\u003e\u003cbr\u003eTwo-component (1:1 ratio)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eFunction\u003c\/strong\u003e\u003cbr\u003eSystem tie-in primer\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003cbr\u003eTREMproof, Vulkem, ExoAir — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eMix Ratio\u003c\/strong\u003e\u003cbr\u003e1:1 by volume\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003cbr\u003ePrimer \/ transition layer\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eTremco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem tie-in\u003c\/strong\u003e — designed to create a compatible bond between Tremco waterproofing and air barrier systems at transitions; confirm system compatibility against the current Tremco specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned to improve adhesion\u003c\/strong\u003e — formulated to improve interlaminary adhesion between system components; final adhesion depends on substrate condition, preparation, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-component\u003c\/strong\u003e — requires accurate mixing at the 1:1 ratio specified in the TDS; confirm pot life and application requirements before use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatibility\u003c\/strong\u003e — designed for use with TREMproof, Vulkem, and ExoAir product families; confirm compatibility against the current Tremco system specification before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eCompatible Substrates\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete and masonry\u003c\/li\u003e\n\u003cli\u003ePrimed or prepared metal\u003c\/li\u003e\n\u003cli\u003eExisting Tremco waterproofing membranes at transition zones\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTransition zones between below-grade waterproofing and above-grade air barriers\u003c\/li\u003e\n\u003cli\u003eTie-in primer at terminations and penetrations in Tremco systems\u003c\/li\u003e\n\u003cli\u003eAdhesion promoter at substrate transitions in Vulkem traffic deck systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eComplete the Tremco Traffic Deck System\u003c\/h2\u003e\n\u003cp style=\"color: #444;\"\u003eTremco Epoxy Primer is Step 1 in the Vulkem traffic deck system. You will also need:\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit,minmax(200px,1fr)); gap: 14px; margin: 16px 0;\"\u003e\n\u003cdiv style=\"background: #eef4fa; border-radius: 6px; padding: 16px; border-top: 3px solid #1C4F8A;\"\u003e\n\u003cstrong style=\"color: #1c4f8a; display: block; margin-bottom: 6px;\"\u003eStep 1 — Primer (this product)\u003c\/strong\u003e \u003cspan style=\"color: #444; font-size: 0.95em;\"\u003eTremco Epoxy Primer — two-component tie-in primer for concrete and transition zones.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #eef4fa; border-radius: 6px; padding: 16px; border-top: 3px solid #1C4F8A;\"\u003e\n\u003cstrong style=\"color: #1c4f8a; display: block; margin-bottom: 6px;\"\u003eStep 2 — Base Coat\u003c\/strong\u003e \u003cspan style=\"color: #444; font-size: 0.95em;\"\u003eVulkem 350NF — single-component urethane waterproofing membrane.\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"\/fr\/products\/tremco-vulkem-350nf\" style=\"color: #1c4f8a; font-size: 0.9em; font-weight: bold;\"\u003eView Product →\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #eef4fa; border-radius: 6px; padding: 16px; border-top: 3px solid #1C4F8A;\"\u003e\n\u003cstrong style=\"color: #1c4f8a; display: block; margin-bottom: 6px;\"\u003eStep 3 — Top Coat\u003c\/strong\u003e \u003cspan style=\"color: #444; font-size: 0.95em;\"\u003eVulkem 950NF — two-component polyurethane wearing course for traffic deck applications.\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"\/fr\/products\/tremco-vulkem-950-nf-slate-gray\" style=\"color: #1c4f8a; font-size: 0.9em; font-weight: bold;\"\u003eView Product →\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorized Tremco Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size: 0.85em; color: #777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Tremco","offers":[{"title":"4 Gallons","offer_id":40124908503219,"sku":"","price":520.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/tremco-epoxy-primer-1070972.jpg?v=1776710891"},{"product_id":"primer-sn","title":"Primer SN Solvent-Free Epoxy Primer – 3 Gal","description":"\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eMapei PRIMER SN | Solvent-Free Two-Component Epoxy Primer\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003e100% Solids, Solvent-Free Two-Component Epoxy Primer for Concrete and Metal\u003c\/strong\u003e | Brand: Mapei\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eMapei PRIMER SN is a 100% solids, solvent-free, two-component epoxy primer for concrete and metal substrates. Designed for professional installers as part of an approved Mapei epoxy or polyurethane floor system. Confirm suitability, coverage, cure time, and system compatibility against the current Mapei TDS, SDS, and project specification before use.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eProfessional system note:\u003c\/strong\u003e PRIMER SN must be topcoated with a compatible Mapei epoxy or polyurethane system. \u003cstrong\u003eDo not use as a standalone floor coating.\u003c\/strong\u003e Confirm the full system specification against the current Mapei TDS and project specification before use.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% solids, solvent-free\u003c\/strong\u003e — low VOC; confirm ventilation requirements against the SDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-component epoxy\u003c\/strong\u003e — requires accurate mixing at the ratio specified in the TDS; confirm pot life and application requirements before use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned to improve adhesion\u003c\/strong\u003e — formulated to improve the bond between concrete or metal substrate and the subsequent coating system; final adhesion depends on substrate condition, preparation, and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned to reduce outgassing\u003c\/strong\u003e — formulated to help seal the substrate surface and reduce outgassing; confirm requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatible\u003c\/strong\u003e — designed for use with compatible Mapei epoxy and polyurethane floor systems; confirm system compatibility against the current Mapei TDS before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrimer coat for Mapei epoxy floor systems on concrete\u003c\/li\u003e\n\u003cli\u003ePrimer coat for Mapei polyurethane floor systems on concrete and metal\u003c\/li\u003e\n\u003cli\u003eSubstrate sealing prior to decorative flake or quartz broadcast systems\u003c\/li\u003e\n\u003cli\u003ePriming for Mapei Ultratop PC polished-concrete topping systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eMapei Polished Concrete System:\u003c\/strong\u003e PRIMER SN is the primer step in Mapei's published Ultratop PC polished-concrete system — Primer SN epoxy primer → Ultratop PC polishable self-leveling topping (available to order: 250-233-3000) → \u003ca href=\"\/fr\/products\/lithium-silicate-densifier-and-sealer-for-concrete\"\u003eMapecrete Hard LI lithium silicate densifier\u003c\/a\u003e → \u003ca href=\"\/fr\/products\/mapecrete-protector-ff\"\u003eMapecrete Protector FF protective coating\u003c\/a\u003e. Confirm the full system specification against the current Mapei documentation before ordering.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eConcrete must be mechanically profiled (shot-blasted or ground to the CSP specified in the TDS), clean, dry, and free of laitance, oil, grease, curing compounds, and incompatible coatings. Conduct moisture testing before application. Refer to the current Mapei TDS for substrate-specific preparation requirements and acceptable moisture levels.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMust be topcoated with a compatible Mapei system — not a standalone floor coating.\u003c\/li\u003e\n\u003cli\u003eDo not apply to damp, contaminated, or unsound substrates.\u003c\/li\u003e\n\u003cli\u003eDo not apply below minimum temperature or when substrate temperature is within 3°C of the dew point; confirm temperature requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003ePot life is temperature-dependent — confirm against the TDS before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:12px 16px;margin:16px 0;border-radius:4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Mapei Flooring Products, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size:0.85em;color:#777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Mapei","offers":[{"title":"Default Title","offer_id":40213632155827,"sku":"","price":598.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/primer-sn-3-gal-5282262.png?v=1776710831"},{"product_id":"transparent-universal-epoxy-100-solids-tue","title":"ResinTech TUE: Transparent Universal Epoxy (100% Solids)","description":"\u003cdiv style=\"border: 1px solid #1C4F8A; background: #eef4fa; border-radius: 6px; padding: 12px 16px; margin: 0 0 18px 0;\"\u003e\n\u003cp style=\"margin: 0; font-size: 1.02em; color: #1c4f8a;\"\u003e\u003cstrong\u003e✅ Usually In Stock, North Vancouver, BC.\u003c\/strong\u003e Call 250-233-3000 to confirm availability or arrange pickup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eResinTech TUE — 100% Solids Transparent Universal Epoxy\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 0 0 18px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eField\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eResinTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eProduct Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eTUE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e100% solids transparent universal epoxy (primer \/ build \/ broadcast binder \/ self-level)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eKit \/ Pack Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e15 L kit\u003cbr\u003ePart A 10 L + Part B 5 L (4.0 US gal mixed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eColour \/ Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eClear, glossy with a slight satin sheen; field-pigmented when approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003ePremium epoxy reinforcement \/ build layer\u003cbr\u003emay substitute for CBE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eResinTech TUE is a 100% solids, two-component transparent universal epoxy for commercial and industrial concrete floor systems. It is used as a primer, reinforcement \/ build coat and broadcast binder for flake, quartz, metallic and solid-colour systems, and as the premium epoxy layer in ResinTech traffic coating systems, where it may be substituted for CBE. For UV-exposed or exterior applications, specify a UV-stable aliphatic topcoat such as \u003ca href=\"\/fr\/products\/high-performance-polyaspartic-hpp\" style=\"color: #1c4f8a;\"\u003eResinTech HPP polyaspartic topcoat\u003c\/a\u003e, \u003ca href=\"\/fr\/products\/aliphatic-top-coat-urethane-tcu\" style=\"color: #1c4f8a;\"\u003eTCU aliphatic urethane topcoat\u003c\/a\u003e, or \u003ca href=\"\/fr\/products\/resintech-chemical-resistant-urethane-cru\" style=\"color: #1c4f8a;\"\u003eCRU chemical-resistant urethane topcoat\u003c\/a\u003e where required by the system design.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eA ResinTech alternative to Tremco Epoxy Primer\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color:#444;\"\u003eResinTech TUE Transparent Universal Epoxy is stocked in North Vancouver and used in the same 100%-solids epoxy primer, bond-coat and build applications. Product chemistry and system build differ between manufacturers — confirm suitability against the current ResinTech TDS before substituting. \u003cem style=\"color:#777;\"\u003eTremco is a registered trademark of Tremco. Used for identification and comparison only; no affiliation or endorsement implied.\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eWhere TUE sits in the system:\u003c\/strong\u003e In ResinTech traffic systems (PTS \/ VTS \/ EWS), TUE is the premium epoxy reinforcement \/ build layer and may be substituted for \u003ca href=\"\/fr\/products\/resintech-core-bond-epoxy-cbe-15l-4-gals\" style=\"color: #1c4f8a;\"\u003eCBE\u003c\/a\u003e where a premium epoxy is preferred. It is protected by an \u003ca href=\"\/fr\/products\/high-performance-polyaspartic-hpp\" style=\"color: #1c4f8a;\"\u003eHPP\u003c\/a\u003e UV-stable surface coat (or a \u003ca href=\"\/fr\/products\/resintech-chemical-resistant-urethane-cru\" style=\"color: #1c4f8a;\"\u003eCRU\u003c\/a\u003e premium finish); where movement or waterproofing is required, a \u003ca href=\"\/fr\/products\/resintech-flexcoat-pu-polyurethane-waterproofing-membrane\" style=\"color: #1c4f8a;\"\u003eFLEXCOAT-PU\u003c\/a\u003e flexible base membrane is used beneath the build. Confirm the system specification against the current ResinTech documentation. View the full range of \u003ca href=\"\/fr\/collections\/concrete-coatings\" style=\"color: #1c4f8a;\"\u003eResinTech floor coating systems\u003c\/a\u003e available at Canopus Supply.\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eBest-Use Applications\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eConfirm all applications against the current ResinTech TDS before specifying.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eParkade decks and ramps\u003c\/li\u003e\n\u003cli\u003eExposed balconies and podium slabs\u003c\/li\u003e\n\u003cli\u003eCommercial and industrial concrete floors\u003c\/li\u003e\n\u003cli\u003eFlake, quartz, metallic and solid-colour broadcast systems\u003c\/li\u003e\n\u003cli\u003ePedestrian walkways and stairwells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eProduct Data\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eSource: ResinTech TUE Technical Data Sheet (TDS-TUE-1.0). Typical values at 23 °C and 50% RH unless noted. Confirm against the current TDS before specifying or ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 28%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eNote\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eComponents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eTwo — Part A resin + Part B hardener\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eMix full kits where possible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eMix Ratio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e2:1 by volume (Part A : Part B)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSolids Content\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e100% by weight\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u0026lt; 50 g\/L\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eEffectively VOC-free for a 100% solids epoxy\u003cbr\u003econfirm against SDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eClear or pigmented\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eClear resin may appear slightly amber in mass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eOdour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eLow\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eUse ventilation during application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eInduction Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eNone\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eApply immediately after proper mixing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eShelf Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e10 months\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eUnopened, stored properly at about 25 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eSealed, cool, dry, ~25 °C\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eProtect from freezing, heat, moisture and direct sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003ePerformance Properties\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eTypical values from the ResinTech TUE TDS. Actual results depend on substrate, preparation, mixing, film build and conditions — confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 32%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eTest Method \/ Note\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eBond Strength to Concrete\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e370 psi\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D4541; typically concrete cohesive failure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eTensile Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e6,500 psi\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D412 \/ D638\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eElongation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e6%\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D412 \/ D638\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eAbrasion Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e35 mg loss\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D4060, CS-17 wheel, 1000 g, 1000 cycles (excellent for an epoxy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eShore Hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e80 D\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D2240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eTack-Free Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e10 hours\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D1640 at 15 mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eDrying Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e20 hours at 15 mils\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eASTM D1640, 24 °C \/ 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eUV Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eUV-resistant epoxy\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eNot a UV-stable aliphatic topcoat; use HPP\/CRU for permanent unprotected UV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eExcellent\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eFor severe chemical service, topcoat with CRU confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eWorking Time, Recoat \u0026amp; Cure\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eTimes vary with temperature, film build and conditions. Large mixed volumes shorten pot life and can create heat. Confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eTemperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003ePot Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eRecoat Window\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eLight Foot Traffic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eFull Cure\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003e10 °C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e60–75 min\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e18–24 h\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e36–48 h\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e~10 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003e21 °C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e40–60 min\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e14–18 h\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e~24 h\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e~7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003e30 °C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e20–30 min\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e8–12 h\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e12–18 h\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e4–5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"color: #555; font-size: 0.9em;\"\u003eIf the surface is hard, glossy or outside the recoat window, sand \/ abrade, vacuum and clean before recoating.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eCoverage \u0026amp; Film Build\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003ePer US gallon. A 15 L kit is approximately 4.0 US gal. Actual coverage varies with profile, porosity, film build and method — confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eUse\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eTypical Film \/ Build\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eTypical Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003ePrimer \/ Base Coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e8–10 mils\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e200–160 ft²\/US gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eTop Coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e8–16 mils\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e245–120 ft²\/US gal depending on profile and build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eBroadcast Receiver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e10–25 mils before broadcast\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e145–80 ft²\/US gal plus aggregate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSelf-Levelling Build Coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e40–250 mils in controlled pours\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eBy design and mass control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eApplication Conditions\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eConfirm all conditions against the current ResinTech TDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 40%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eCondition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eRequirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSubstrate Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e10–30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eAmbient Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e10–32 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eRelative Humidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eMaximum 85% recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eDew Point\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eSubstrate at least 3 °C above dew point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eConcrete Moisture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eDry concrete; typical screening limit 4% Tramex or 85% RH by ASTM F2170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eConcrete Age\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eNormally 28 days unless the designer approves earlier work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eMinimum Concrete Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e3,600 psi compressive and 220 psi tensile pull-off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eSystem Compatibility\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eConfirm all system combinations against the current ResinTech TDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #1C4F8A;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px; width: 35%;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eSystem Layer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong style=\"color: #fff;\"\u003eCompatible Products\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eFlexible Base (movement \/ “+” systems)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003ca href=\"\/fr\/products\/resintech-flexcoat-pu-polyurethane-waterproofing-membrane\" style=\"color: #1c4f8a;\"\u003eResinTech FLEXCOAT-PU\u003c\/a\u003e flexible base membrane, beneath the build — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eReinforcement \/ Build\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eTUE may substitute for \u003ca href=\"\/fr\/products\/resintech-core-bond-epoxy-cbe-15l-4-gals\" style=\"color: #1c4f8a;\"\u003eResinTech CBE\u003c\/a\u003e as the premium epoxy build layer — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eSurface \/ Topcoats\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003ca href=\"\/fr\/products\/high-performance-polyaspartic-hpp\" style=\"color: #1c4f8a;\"\u003eResinTech HPP (UV-stable polyaspartic surface)\u003c\/a\u003e, \u003ca href=\"\/fr\/products\/resintech-chemical-resistant-urethane-cru\" style=\"color: #1c4f8a;\"\u003eCRU (premium chemical \/ UV finish)\u003c\/a\u003e, \u003ca href=\"\/fr\/products\/aliphatic-top-coat-urethane-tcu\" style=\"color: #1c4f8a;\"\u003eTCU (aliphatic urethane)\u003c\/a\u003e — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\u003cstrong\u003eNot Recommended For\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003eImmersion service; exterior or UV-exposed applications without a compatible UV-stable aliphatic topcoat — confirm against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eApplication Notes\u003c\/h2\u003e\n\u003cp style=\"color: #777; font-size: 0.9em;\"\u003e\u003cem\u003eAlways confirm application requirements against the current TDS, SDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eSurface Preparation\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cp\u003eConcrete must be sound, clean, dry and free of laitance, curing compounds, sealers, oil, grease and bond breakers. Mechanically prepare to ICRI CSP 2–3 for thin coatings and CSP 3–4 for broadcast or traffic-duty work. Vacuum until dust is removed from pores and profile; do not rely on acid etching for professional work. Repair cracks, spalls, joints and edges before application; dynamic cracks and movement joints require separate detailing. Test existing coatings for adhesion and compatibility. Do not apply to wet concrete, condensation or active water intrusion — TUE is not a moisture-vapour mitigation system. Confirm all requirements against the current TDS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eMixing\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cp\u003eCondition materials to application temperature before use. Pre-mix Part A; add compatible pigment to Part A first when a pigmented coat is required. Add Part B at 2:1 by volume and mix mechanically for 3–5 minutes at low speed. Scrape sides and bottom of the pail and avoid whipping air into the resin. Do not thin with solvents. Use full kits or accurately measured partial kits. For deep-build or casting work, pour promptly after mixing and control mass to limit heat. Confirm mixing procedure against the current TDS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eApplication Tools\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cp\u003eApply by squeegee, roller, notched squeegee or gauge rake and backroll to an even wet film, maintaining a wet edge. For broadcast systems, broadcast quartz, flake or sand into the wet TUE at the specified rate and remove loose media after cure. Confirm recommended tools against the current TDS.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eFinish \u0026amp; Gloss\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cp\u003eTUE cures glossy with a slight satin character from its additive package, rather than a mirror-like super high-gloss. Where a super high-gloss finish is required, ResinTech recommends \u003ca href=\"\/fr\/products\/resintech-core-bond-epoxy-cbe-15l-4-gals\" style=\"color: #1c4f8a;\"\u003eCBE (Core Bond Epoxy)\u003c\/a\u003e. Colour, clarity and gloss can vary with film thickness, mass, temperature, substrate and pigmenting method.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border: 1px solid #d4e2f0; border-radius: 6px; margin: 14px 0; overflow: hidden;\"\u003e\n\u003csummary style=\"cursor: pointer; list-style: none; padding: 12px 16px; background: #eef4fa; color: #1c4f8a; font-weight: bold; font-size: 1.05em;\"\u003eLimitations\u003c\/summary\u003e\n\u003cdiv style=\"padding: 14px 16px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eUV-resistant, not a UV-stable aliphatic system; under prolonged unprotected UV it can amber or lose gloss — topcoat with HPP or CRU for permanent exterior UV.\u003c\/li\u003e\n\u003cli\u003eNot a crack-bridging membrane and not for active cracks, moving joints or structural movement.\u003c\/li\u003e\n\u003cli\u003eNot a waterproofing membrane or moisture-vapour mitigation system.\u003c\/li\u003e\n\u003cli\u003eDeep pours are for experienced installers only — do not attempt large-volume casting without a mock-up and heat-control plan.\u003c\/li\u003e\n\u003cli\u003eDo not apply to wet, frozen, contaminated, dusty or condensing substrates.\u003c\/li\u003e\n\u003cli\u003eFor severe chemical service, protect with a CRU topcoat — confirm against the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"color: #1c4f8a;\"\u003eWhat systems is TUE used in?\u003c\/h3\u003e\n\u003cp style=\"color: #444;\"\u003eTUE is the premium epoxy reinforcement \/ build layer in ResinTech traffic systems (PTS, VTS and EWS), where it may be substituted for CBE, and the epoxy build layer in flake, quartz, metallic and solid-colour floor systems. See the full range of \u003ca href=\"\/fr\/collections\/concrete-coatings\" style=\"color: #1c4f8a;\"\u003eResinTech floor coating systems\u003c\/a\u003e at Canopus Supply. Confirm system design against the current ResinTech TDS.\u003c\/p\u003e\n\u003ch3 style=\"color: #1c4f8a;\"\u003eDoes TUE yellow under UV exposure?\u003c\/h3\u003e\n\u003cp style=\"color: #444;\"\u003eTUE is more UV-resistant than ordinary epoxies and resists yellowing better than standard epoxy, but it is not a UV-stable aliphatic system. For long-term colour stability in UV-exposed or exterior applications, use a compatible UV-stable aliphatic topcoat such as \u003ca href=\"\/fr\/products\/high-performance-polyaspartic-hpp\" style=\"color: #1c4f8a;\"\u003eResinTech HPP\u003c\/a\u003e, \u003ca href=\"\/fr\/products\/aliphatic-top-coat-urethane-tcu\" style=\"color: #1c4f8a;\"\u003eTCU\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/resintech-chemical-resistant-urethane-cru\" style=\"color: #1c4f8a;\"\u003eCRU\u003c\/a\u003e. Confirm system suitability against the current TDS.\u003c\/p\u003e\n\u003ch3 style=\"color: #1c4f8a;\"\u003eCan TUE be used on exterior surfaces?\u003c\/h3\u003e\n\u003cp style=\"color: #444;\"\u003eTUE may be used in interior and protected exterior assemblies; for permanent unprotected exterior UV exposure, specify a UV-stable aliphatic topcoat over it. Confirm suitability against the current TDS and project specification.\u003c\/p\u003e\n\u003ch3 style=\"color: #1c4f8a;\"\u003eHow do I get a super high-gloss finish?\u003c\/h3\u003e\n\u003cp style=\"color: #444;\"\u003eTUE cures glossy with a slight satin character. For a mirror-like, super high-gloss result, ResinTech recommends \u003ca href=\"\/fr\/products\/resintech-core-bond-epoxy-cbe-15l-4-gals\" style=\"color: #1c4f8a;\"\u003eCBE (Core Bond Epoxy)\u003c\/a\u003e. Confirm finish expectations against the current TDS.\u003c\/p\u003e\n\u003ch3 style=\"color: #1c4f8a;\"\u003eWhere can I buy ResinTech TUE in BC?\u003c\/h3\u003e\n\u003cp style=\"color: #444;\"\u003eResinTech TUE is stocked at Canopus Supply in North Vancouver. Available for pickup or delivery across British Columbia. Call \u003ca href=\"tel:2502333000\" style=\"color: #1c4f8a; font-weight: 600;\"\u003e250-233-3000\u003c\/a\u003e to confirm stock or arrange a volume order.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTechnical Documentation\u003c\/h2\u003e\n\u003cp style=\"color:#444;\"\u003eDownload the current ResinTech TUE Technical Data Sheet (TDS) using the button at the top of this page. Safety Data Sheets (SDS Part A and Part B) are available on request — contact Canopus Supply. Confirm all values against the current documentation before specifying or ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv style=\"border: 1px solid #1C4F8A; background: #eef4fa; border-radius: 4px; padding: 16px 20px; margin: 20px 0;\"\u003e\n\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTrade Purchasing Note\u003c\/h2\u003e\n\u003cp style=\"margin: 0 0 10px 0;\"\u003eAll sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 0.9em; color: #555;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eOrder Enquiries \u0026amp; Volume Orders\u003c\/strong\u003e\n\u003cp style=\"margin: 8px 0 0 0;\"\u003eFor volume orders, system compatibility questions, pickup timing or delivery across BC, contact Canopus Supply before placing a bulk order.\u003c\/p\u003e\n\u003cp style=\"margin: 8px 0 0 0;\"\u003e\u003cstrong\u003eCall:\u003c\/strong\u003e 1 (250) 233-3000\u003cbr\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e \u003ca href=\"mailto:order@canopussupply.com\"\u003eorder@canopussupply.com\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003ePickup:\u003c\/strong\u003e Unit 103, 185 Forester Street, North Vancouver, BC\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorised ResinTech Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n","brand":"ResinTech","offers":[{"title":"TUE (15 L\/4 Gals)","offer_id":43359552078044,"sku":"TUE","price":330.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/resintech-tue-transparent-epoxy-base-coat-4953052.png?v=1782209228"},{"product_id":"resintech-core-bond-epoxy-cbe-15l-4-gals","title":"ResinTech Core Bond Epoxy (CBE) 15 L \/ 4 Gal","description":"\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:6px;padding:12px 16px;margin:0 0 18px 0;\"\u003e\n  \u003cp style=\"margin:0;font-size:1.02em;color:#1C4F8A;\"\u003e\u003cstrong\u003e✅ Usually In Stock — North Vancouver, BC.\u003c\/strong\u003e Call 250-233-3000 to confirm availability or arrange pickup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eResinTech Core Bond Epoxy (CBE) — High-Bond 100% Solids Epoxy\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eTwo-Component, 100% Solids High-Bond Epoxy — Primer, Bond Coat, Wear Coat, Broadcast Binder \u0026amp; Mortar Binder\u003c\/strong\u003e | Brand: ResinTech | 15 L kit\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eResinTech CBE is a low-odour, two-component, 100% solids epoxy that wets into properly prepared concrete to create a strong bond for ResinTech flooring, coating and repair assemblies. It is the preferred ResinTech epoxy where adhesion, concrete consolidation and reinforced broadcast build matter more than UV stability or flexibility — the standard reinforcement \/ broadcast-binder layer in ResinTech traffic systems. Confirm system compatibility, film build, recoat windows and topcoat requirements against the current ResinTech TDS, SDS and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eA ResinTech alternative to Tremco Vulkem 191 QD Primer \u0026amp; Tremco Epoxy Primer\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color:#444;\"\u003eResinTech CBE Core Bond Epoxy is stocked in North Vancouver and used in the same epoxy primer, bond-coat and adhesion-promoter applications. Product chemistry and system build differ between manufacturers — confirm suitability against the current ResinTech TDS before substituting. \u003cem style=\"color:#777;\"\u003eVulkem and Tremco are registered trademarks of Tremco. Used for identification and comparison only; no affiliation or endorsement implied.\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:0 0 18px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eField\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eResinTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eProduct Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eCBE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eTwo-component, 100% solids high-bond epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eKit \/ Pack Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e15 L kit — Part A 10 L + Part B 5 L (4.0 US gal mixed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eColour \/ Finish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eClear to slightly amber; field-pigmented when approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eHigh-bond primer \/ bond coat \/ wear coat \/ broadcast binder \/ mortar binder — the standard reinforcement layer in ResinTech systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eWhere CBE sits in the system:\u003c\/strong\u003e CBE is the high-bond epoxy used as a primer, bond coat, broadcast binder and reinforced wear layer in ResinTech traffic coating systems (PTS \/ VTS \/ EWS). Where UV exposure, chemical service or a decorative finish is required, protect CBE with an \u003ca href=\"\/fr\/products\/high-performance-polyaspartic-hpp\" style=\"color:#1C4F8A;\"\u003eHPP\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/resintech-chemical-resistant-urethane-cru\" style=\"color:#1C4F8A;\"\u003eCRU\u003c\/a\u003e topcoat. Where a premium or UV-resistant epoxy build layer is preferred, \u003ca href=\"\/fr\/products\/transparent-universal-epoxy-100-solids-tue\" style=\"color:#1C4F8A;\"\u003eResinTech TUE\u003c\/a\u003e may be substituted for CBE. Confirm the system build against the current ResinTech system specification.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eBest-Use Applications\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eConfirm all applications against the current ResinTech TDS before specifying.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConcrete primer under epoxy, polyaspartic and urethane systems\u003c\/li\u003e\n  \u003cli\u003eBond coat for overlays, toppings, patch repairs and cove bases\u003c\/li\u003e\n  \u003cli\u003eInterior wear coat where UV exposure is limited\u003c\/li\u003e\n  \u003cli\u003eBroadcast receiver for silica sand, quartz and decorative flake systems\u003c\/li\u003e\n  \u003cli\u003eEpoxy mortar binder for patching, ramps, coves and floor detailing\u003c\/li\u003e\n  \u003cli\u003eHigh-bond base resin for parkade, warehouse and service-area assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eProduct Data\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eSource: ResinTech CBE Technical Data Sheet (TDS-CBE-1.0). Typical values at 23 °C and 50% RH unless noted. Confirm against the current TDS before specifying or ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:28%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eNote\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eComponents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eTwo — Part A resin + Part B hardener\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eMix full kits where possible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eMix Ratio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e2:1 by volume (Part A : Part B)\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSolids Content\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e100% by weight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D1353\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u0026lt; 50 g\/L\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eEffectively VOC-free for a 100% solids epoxy — confirm against SDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eClear to slightly amber\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eMay be pigmented where approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eDensity (mixed)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e9.2–9.6 lb\/US gal\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D1475\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eOdour\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eLow\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eUse ventilation during application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eInduction Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eNone\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eApply immediately after proper mixing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eWater Absorption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e≤ 0.3%\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D570\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eShelf Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e12 months\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eUnopened; store sealed at 5–30 °C, protect from freezing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003ePerformance Properties\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eTypical values from the ResinTech CBE TDS. Actual results depend on substrate, preparation, mixing, film build and conditions — confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eProperty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:32%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTest Method \/ Note\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eBond Strength to Concrete\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e420 psi\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D4541; highest-bond material in the ResinTech line (typically concrete cohesive failure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eTensile Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e5,100 psi\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D412 \/ D638\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eElongation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e8%\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eRigid epoxy; not a crack-bridging membrane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eAbrasion Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e50 mg loss\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D4060, CS-17 wheel, 1000 g, 1000 cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eShore Hardness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e80 D\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D2240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eTack-Free Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e6 hours\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D1640 at 15 mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eDrying Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e8 hours at 15 mils\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eASTM D1640, 24 °C \/ 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eUV Stability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eLimited\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eUse HPP or CRU topcoat for UV exposure, or choose TUE for a UV-resistant epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eModerate\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eUse CRU topcoat for stronger chemical service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eWorking Time, Recoat \u0026amp; Cure\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eTimes vary with temperature, film build and conditions. Cold slabs slow cure; hot conditions shorten pot life. Confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTemp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003ePot Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eMin Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eMax Recoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eFoot Traffic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eFull Cure\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003e10 °C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e50–60 min\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e18–24 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e36–48 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e48–72 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e~10 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003e20 °C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e35–40 min\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10–18 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e24 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e~24 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e~7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003e30 °C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e15–20 min\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e6–10 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e24 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e12–18 h\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e4–5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"color:#555;font-size:0.9em;\"\u003eIf the maximum recoat window is exceeded, abrade to remove gloss, vacuum thoroughly and clean before recoating.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eCoverage \u0026amp; Film Build\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003ePer US gallon (15 L kit ≈ 4.0 US gal). Actual coverage varies with profile, porosity, film build and method — confirm against the current TDS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:35%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eUse\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Film \/ Build\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eTypical Coverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003ePrimer \/ Base Coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e6–10 mils\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e240–160 ft²\/US gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eBond Coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eThin continuous film\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e405–245 ft²\/US gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eWear Coat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10–20 mils\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e160–80 ft²\/US gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eBroadcast Receiver\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10–20 mils before broadcast\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e145–100 ft²\/US gal plus aggregate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eMortar \/ Cove Binder\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eFilled with clean dry aggregate\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eVaries with aggregate ratio and detail size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eApplication Conditions\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eConfirm all conditions against the current ResinTech TDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#1C4F8A;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;width:40%;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eCondition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong style=\"color:#fff;\"\u003eRequirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eSubstrate Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10–30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eAmbient Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e10–32 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eRelative Humidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eMaximum 85% recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eDew Point\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eSubstrate at least 3 °C above dew point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eConcrete Moisture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eDry concrete; typical screening limit 4% Tramex or 85% RH by ASTM F2170\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eConcrete Age\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003eNormally 28 days unless the designer approves earlier work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\u003cstrong\u003eMinimum Concrete Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e3,600 psi compressive and 220 psi tensile pull-off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eApplication Notes\u003c\/h2\u003e\n\u003cp style=\"color:#777;font-size:0.9em;\"\u003e\u003cem\u003eAlways confirm application requirements against the current TDS, SDS and project specification before use.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eSurface Preparation\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cp\u003eConcrete must be sound, clean, dry and free of laitance, curing compounds, sealers, oil, grease and bond breakers. Mechanically prepare to ICRI CSP 2–3 for primer\/basecoat use and CSP 3–4 for broadcast, wear coat or vehicular-duty use. Shot blast, grind or scarify as needed; vacuum until dust is removed from pores and profile. Repair cracks, joints, spalls and edges before application. Test existing coatings for adhesion and compatibility; remove unsound or unknown coatings. Do not apply to wet concrete, active water intrusion or condensation — CBE is not a moisture-mitigation system. Confirm against the current TDS.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eMixing\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cp\u003eCondition materials to application temperature before use. Pre-mix Part A; add pigment to Part A first when a pigmented coat is required. Add Part B at 2:1 by volume and mix mechanically for 3–4 minutes at low speed. Scrape sides and bottom of the pail and avoid whipping air into the material. Do not thin with solvents. Do not hand-mix partial kits unless accurately measured. For mortar, add clean dry aggregate only after Part A and Part B are fully mixed. Confirm against the current TDS.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eApplication \u0026amp; Broadcast\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cp\u003ePrime \/ coat by squeegee, roller or brush; backroll to a continuous film and eliminate puddles. For broadcast, cast silica sand, quartz or flake into the wet CBE at the specified rate and remove all loose aggregate after cure. For mortar and coves, blend mixed CBE with clean dry aggregate to the selected consistency and finish while workable. Check wet film thickness; excessive thickness can increase heat, blush or cure inconsistency. Confirm against the current TDS.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails style=\"border:1px solid #d4e2f0;border-radius:6px;margin:14px 0;overflow:hidden;\"\u003e\n  \u003csummary style=\"cursor:pointer;list-style:none;padding:12px 16px;background:#eef4fa;color:#1C4F8A;font-weight:bold;font-size:1.05em;\"\u003eLimitations\u003c\/summary\u003e\n  \u003cdiv style=\"padding:14px 16px;\"\u003e\u003cul style=\"margin:0;\"\u003e\n    \u003cli\u003eNot UV stable as a final exposed exterior coating — yellowing\/chalking may occur. Use an HPP or CRU topcoat for UV-exposed service, or specify TUE where a UV-resistant epoxy is needed.\u003c\/li\u003e\n    \u003cli\u003eNot flexible and not intended to bridge dynamic cracks, moving joints or structural movement.\u003c\/li\u003e\n    \u003cli\u003eNot a standalone waterproofing membrane or moisture-vapour mitigation system.\u003c\/li\u003e\n    \u003cli\u003eDo not apply to wet, frozen, contaminated or dusty substrates.\u003c\/li\u003e\n    \u003cli\u003eAvoid thick unfilled pours or puddles due to exotherm and cure inconsistency.\u003c\/li\u003e\n    \u003cli\u003eColour and gloss can vary with film thickness, temperature, substrate absorption and pigmenting method.\u003c\/li\u003e\n  \u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eTechnical Documentation\u003c\/strong\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003eRequest the current ResinTech CBE Technical Data Sheet (TDS) and Safety Data Sheets (SDS) from Canopus Supply before specifying or ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003chr\u003e\n\n\u003cdiv style=\"border:1px solid #1C4F8A;background:#eef4fa;border-radius:4px;padding:16px 20px;margin:20px 0;\"\u003e\n  \u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eTrade Purchasing Note\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 10px 0;\"\u003eAll sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.9em;color:#555;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n  \u003cstrong style=\"color:#1C4F8A;\"\u003eOrder Enquiries \u0026amp; Volume Orders\u003c\/strong\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003eFor volume orders, system compatibility questions, pickup timing or delivery across BC, contact Canopus Supply before placing a bulk order.\u003c\/p\u003e\n  \u003cp style=\"margin:8px 0 0 0;\"\u003e\u003cstrong\u003eCall:\u003c\/strong\u003e 1 (250) 233-3000\u003cbr\u003e\u003cstrong\u003eEmail:\u003c\/strong\u003e \u003ca href=\"mailto:order@canopussupply.com\"\u003eorder@canopussupply.com\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003ePickup:\u003c\/strong\u003e Unit 103, 185 Forester Street, North Vancouver, BC\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorised ResinTech Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e","brand":"ResinTech","offers":[{"title":"CBE (15 L\/4 Gals)","offer_id":47054968979676,"sku":null,"price":310.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/files\/resintech-core-bond-epoxy-cbe-15-l-4-gal-4661406.png?v=1782029106"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/collections\/epoxy-coatings-1643889.png?v=1782028990","url":"https:\/\/www.canopussupply.com\/fr\/collections\/epoxy-coatings.oembed","provider":"Canopus Supply Inc","version":"1.0","type":"link"}