{"product_id":"tremco-dymonic-100-sealant","title":"Dymonic® 100 High-Performance, High-Movement Single-Component, Polyurethane Sealant","description":"\u003ch2 style=\"color: #1c4f8a; margin-top: 0;\"\u003eTremco Dymonic® 100\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.08em; color: #333;\"\u003e\u003cstrong\u003eHigh-Performance, High-Movement Single-Component Polyurethane Sealant\u003c\/strong\u003e | Brand: Tremco\u003c\/p\u003e\n\u003cp style=\"font-size: 1.02em; color: #444;\"\u003eTremco Dymonic 100 is a single-component, moisture-curing \u003ca href=\"\/en-us\/collections\/concrete-sealers\" title=\"Concrete Sealers\"\u003epolyurethane sealant\u003c\/a\u003e for high-movement joints in commercial and institutional construction. Designed for specifiers, glazing contractors, and building envelope professionals. Confirm suitability, primer requirements, joint design, and substrate compatibility against the current Tremco TDS, SDS, and project specification before use.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 14px 18px; margin: 18px 0; border-radius: 4px;\"\u003e\n\u003cstrong style=\"color: #1c4f8a;\"\u003eProfessional note:\u003c\/strong\u003e Dymonic 100 is rated for ±50% joint movement. \u003cstrong\u003eJoint design, substrate preparation, and correct tooling are critical\u003c\/strong\u003e to achieving a durable, watertight seal. Always confirm substrate compatibility and primer requirements against the current TDS before application.\u003c\/div\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eDymonic 100 cures by reaction with atmospheric moisture to form a flexible, permanently elastic seal. Its single-component formulation eliminates on-site mixing. The cured sealant is formulated for UV exposure, weathering, and temperature cycling on exposed exterior joints; confirm UV and weathering performance against the current TDS for your specific exposure conditions.\u003c\/p\u003e\n\u003cp\u003eWith a ±50% movement capability, Dymonic 100 is designed to accommodate the thermal expansion, structural movement, and substrate deflection typical of modern commercial construction. It is paintable after full cure and available in a range of colours; confirm colour availability with Canopus Supply before specifying.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e±50% joint movement capability\u003c\/strong\u003e — designed for high thermal and structural movement in commercial building joints; confirm joint design requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component, moisture-curing\u003c\/strong\u003e — no mixing required; apply directly from the cartridge or sausage pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to multiple substrates\u003c\/strong\u003e — designed for adhesion to concrete, masonry, metal, glass, aluminum, and many coated surfaces; confirm primer requirements by substrate against the current TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV and weather resistance properties\u003c\/strong\u003e — formulated for exposed exterior joints; confirm UV and weathering performance against the TDS for your specific exposure conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable after full cure\u003c\/strong\u003e — accepts latex and oil-based paints; do not paint over uncured sealant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-sag formula\u003c\/strong\u003e — designed for vertical and overhead joint applications; confirm suitability against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour range\u003c\/strong\u003e — available in multiple standard colours; confirm current availability with Canopus Supply before specifying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExpansion and control joints in concrete and masonry facades\u003c\/li\u003e\n\u003cli\u003eCurtain wall and storefront perimeter sealing\u003c\/li\u003e\n\u003cli\u003ePrecast concrete panel joints\u003c\/li\u003e\n\u003cli\u003eWindow and door perimeter sealing\u003c\/li\u003e\n\u003cli\u003eMetal panel and composite cladding joints\u003c\/li\u003e\n\u003cli\u003eParking structure and podium deck perimeter joints\u003c\/li\u003e\n\u003cli\u003eGeneral building envelope joint sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eMovement Capability\u003c\/strong\u003e\u003cbr\u003e±50% — confirm joint design against TDS\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eComponents\u003c\/strong\u003e\u003cbr\u003eSingle-component\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eCure Mechanism\u003c\/strong\u003e\u003cbr\u003eMoisture-curing polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #eef4fa;\"\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003eVertical, horizontal, overhead — confirm against TDS\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003ePaintable\u003c\/strong\u003e\u003cbr\u003eYes, after full cure\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #c9d6e5; padding: 10px;\"\u003e\n\u003cstrong\u003ePrimer\u003c\/strong\u003e\u003cbr\u003eConfirm by substrate against TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eSurface Preparation \u0026amp; Application\u003c\/h2\u003e\n\u003cp\u003eSubstrates must be clean, dry, sound, and free of dust, oil, grease, laitance, and incompatible coatings. Install backer rod to the correct depth to achieve the joint width-to-depth ratio specified in the TDS. Apply sealant by gun, tool immediately to ensure full contact with joint faces, and finish smooth. Remove masking tape before the sealant skins. Refer to the current Tremco TDS for primer requirements by substrate, application temperature range, and cure times.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNot for use in joints subject to continuous water immersion unless specifically approved by Tremco.\u003c\/li\u003e\n\u003cli\u003eDo not apply to wet, frozen, or contaminated substrates.\u003c\/li\u003e\n\u003cli\u003eDo not apply below 4°C or above 40°C ambient temperature; confirm temperature requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003eNot recommended for structural glazing or load-bearing applications.\u003c\/li\u003e\n\u003cli\u003eDo not paint until fully cured — premature painting may cause adhesion failure.\u003c\/li\u003e\n\u003cli\u003eConfirm primer requirements for porous, coated, or non-standard substrates against the current TDS before application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eStorage \u0026amp; Shelf Life\u003c\/h2\u003e\n\u003cp\u003eStore in original, unopened cartridges or sausage packs in a cool, dry area away from direct sunlight and moisture. Do not freeze. Confirm shelf life and storage temperature requirements against the product label and current TDS.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eHealth \u0026amp; Safety\u003c\/h2\u003e\n\u003cp\u003eRead the current Safety Data Sheet (SDS) before use. Contains isocyanate prepolymers — wear gloves, eye protection, and ensure adequate ventilation. Refer to the SDS for full hazard classification and first-aid measures.\u003c\/p\u003e\n\u003ch2 style=\"color: #1c4f8a;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes Dymonic 100 require a primer?\u003c\/h3\u003e\n\u003cp\u003eIn many applications, Dymonic 100 is designed for direct application without primer. However, primer is recommended on certain porous, coated, or non-standard substrates. Always confirm primer requirements against the current Tremco TDS or contact Canopus Supply for guidance.\u003c\/p\u003e\n\u003ch3\u003eWhat joint movement can Dymonic 100 accommodate?\u003c\/h3\u003e\n\u003cp\u003eDymonic 100 is rated for ±50% joint movement. Confirm joint design requirements against the current TDS for your specific application.\u003c\/p\u003e\n\u003ch3\u003eCan it be used on exterior exposed joints?\u003c\/h3\u003e\n\u003cp\u003eDymonic 100 is formulated for exposed exterior building envelope joints. Confirm UV and weathering performance against the current TDS for your specific exposure conditions.\u003c\/p\u003e\n\u003ch3\u003eIs it paintable?\u003c\/h3\u003e\n\u003cp\u003eYes, Dymonic 100 is paintable with latex or oil-based paints after the sealant has fully cured. Do not paint over uncured sealant.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #1C4F8A; background: #eef4fa; padding: 12px 16px; margin: 16px 0; border-radius: 4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, joint design, substrate compatibility, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\u003chr\u003e\n\u003cp style=\"font-size: 0.9em; color: #555;\"\u003e\u003cstrong style=\"color: #1c4f8a;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Authorized Tremco Distributor, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size: 0.85em; color: #777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, joint design, substrate preparation, installation method, cure time, and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tremco","offers":[{"title":"Almond \/ 600 ml","offer_id":40119339614387,"sku":"","price":13.0,"currency_code":"USD","in_stock":false},{"title":"Aluminum Stone \/ 600 ml","offer_id":40119339647155,"sku":"","price":13.0,"currency_code":"USD","in_stock":false},{"title":"Anodized Aluminum \/ 600 ml","offer_id":40119339679923,"sku":"","price":13.0,"currency_code":"USD","in_stock":false},{"title":"Beige \/ 600 ml","offer_id":40119339712691,"sku":"","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 600 ml","offer_id":40119339745459,"sku":"","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Bronze \/ 600 ml","offer_id":40119339778227,"sku":"","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Buff \/ 600 ml","offer_id":40119339810995,"sku":"","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Dark Bronze \/ 600 ml","offer_id":40119339843763,"sku":"","price":13.0,"currency_code":"USD","in_stock":false},{"title":"Gray \/ 600 ml","offer_id":40119339876531,"sku":"","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Gray Stone \/ 600 ml","offer_id":40119339909299,"sku":"","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Hartford Green \/ 600 ml","offer_id":40119339942067,"sku":"","price":13.0,"currency_code":"USD","in_stock":false},{"title":"Ivory \/ 600 ml","offer_id":40119339974835,"sku":"","price":13.0,"currency_code":"USD","in_stock":false},{"title":"Light Bronze \/ 600 ml","offer_id":40119340007603,"sku":"","price":13.0,"currency_code":"USD","in_stock":false},{"title":"Limestone \/ 600 ml","offer_id":40119340040371,"sku":"","price":13.0,"currency_code":"USD","in_stock":false},{"title":"Natural Clay \/ 600 ml","offer_id":40119340073139,"sku":"","price":13.0,"currency_code":"USD","in_stock":false},{"title":"Off White \/ 600 ml","offer_id":40119340105907,"sku":"","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Precast White \/ 600 ml","offer_id":40119340138675,"sku":"","price":13.0,"currency_code":"USD","in_stock":false},{"title":"Redwood Tan \/ 600 ml","offer_id":40119340171443,"sku":"","price":13.0,"currency_code":"USD","in_stock":false},{"title":"Sandalwood \/ 600 ml","offer_id":40119340204211,"sku":"","price":8.0,"currency_code":"USD","in_stock":false},{"title":"Stone \/ 600 ml","offer_id":40119340236979,"sku":"","price":8.0,"currency_code":"USD","in_stock":false},{"title":"white \/ 600 ml","offer_id":40119340269747,"sku":"","price":18.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/dymonic-100-high-performance-high-movement-single-component-polyurethane-sealant-1827781.jpg?v=1776710891","url":"https:\/\/www.canopussupply.com\/en-us\/products\/tremco-dymonic-100-sealant","provider":"Canopus Supply Inc","version":"1.0","type":"link"}