{"product_id":"b-tuff-302-ng-basecoat","title":"B-TUFF® 302 NG Single Component Solvent-Free Basecoat for Concrete, Plywood and Metal","description":"\u003ch2 style=\"color:#1C4F8A;margin-top:0;\"\u003eB-TUFF® 302 NG\u003c\/h2\u003e\n\n\u003cp style=\"font-size:1.08em;color:#333;\"\u003e\u003cstrong\u003eSingle-Component, Solvent-Free Basecoat for Concrete, Plywood and Metal\u003c\/strong\u003e | Brand: B-TUFF\u003c\/p\u003e\n\n\u003cp style=\"font-size:1.02em;color:#444;\"\u003eB-TUFF® 302 NG is a single-component, solvent-free polyurethane basecoat for use on concrete, plywood, and metal substrates. Its moisture-tolerant formulation and single-component convenience are designed for professional installers working on traffic deck, pedestrian, and industrial flooring systems. Confirm suitability, coverage, cure time, and system compatibility against the current TDS, SDS, and project specification before use.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:14px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cstrong style=\"color:#1C4F8A;\"\u003eProfessional system note:\u003c\/strong\u003e B-TUFF® 302 NG is a basecoat and \u003cstrong\u003emust be topcoated\u003c\/strong\u003e with a compatible B-TUFF wearing course or approved finish coat. It is not intended as a final exposed wear surface. Confirm the full system specification before use.\n\u003c\/div\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eB-TUFF® 302 NG cures by reaction with atmospheric moisture to form a flexible, adhesive basecoat layer. Its single-component formulation eliminates on-site mixing. The NG (Next Generation) formula is solvent-free, delivering low VOC emissions; confirm ventilation requirements against the SDS.\u003c\/p\u003e\n\n\u003cp\u003eThe product is designed to bond to concrete, plywood, and metal substrates after proper preparation, providing a foundation for subsequent wearing course layers; final adhesion depends on substrate condition, preparation, and application method. Its moisture-tolerant chemistry is designed for application over substrates with moderate residual moisture; confirm the maximum acceptable moisture level against the current TDS and conduct moisture testing before application.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eKey Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component\u003c\/strong\u003e — no on-site mixing; apply directly from the container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-free, low VOC\u003c\/strong\u003e — confirm ventilation requirements against the SDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture-tolerant\u003c\/strong\u003e — designed for application over substrates with moderate residual moisture; confirm the maximum acceptable moisture level against the TDS and conduct moisture testing before application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-substrate\u003c\/strong\u003e — designed for use on concrete, plywood, and metal after correct surface preparation; confirm substrate-specific requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat window\u003c\/strong\u003e — allows subsequent coats to be applied within the recoat window specified in the TDS; confirm recoat times as they vary with temperature and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible basecoat\u003c\/strong\u003e — designed to accommodate minor substrate movement; confirm performance properties against the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBasecoat for B-TUFF traffic deck and pedestrian deck systems\u003c\/li\u003e\n\u003cli\u003eConcrete, plywood, and metal substrate priming and bonding\u003c\/li\u003e\n\u003cli\u003eParkade and parking structure deck systems\u003c\/li\u003e\n\u003cli\u003ePedestrian walkways, ramps, and balcony deck systems\u003c\/li\u003e\n\u003cli\u003eIndustrial flooring basecoat on concrete and metal substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003ePerformance Highlights\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:8px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eChemistry\u003c\/strong\u003e\u003cbr\u003eSingle-component polyurethane\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eVOC\u003c\/strong\u003e\u003cbr\u003eSolvent-free \/ Low VOC\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eCure Mechanism\u003c\/strong\u003e\u003cbr\u003eMoisture-curing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#eef4fa;\"\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eSubstrates\u003c\/strong\u003e\u003cbr\u003eConcrete, plywood, metal — confirm prep against TDS\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003eRoller or squeegee\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #c9d6e5;padding:10px;\"\u003e\n\u003cstrong\u003eSystem Role\u003c\/strong\u003e\u003cbr\u003eBasecoat \/ bonding layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eConcrete must be mechanically profiled (shot-blasted or ground to the CSP specified in the TDS), clean, and free of laitance, oil, grease, and incompatible coatings. Plywood must be structurally sound, clean, and free of surface contamination. Metal must be clean, dry, and free of rust, mill scale, and oil. Refer to the current TDS for substrate-specific preparation requirements and acceptable moisture levels.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eApplication Instructions\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e Prepare the substrate as described above. Confirm moisture levels are within the acceptable range specified in the TDS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e Stir thoroughly before use. No mixing of separate components required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Apply by roller or squeegee at the coverage rate specified in the TDS. Ensure uniform film build across the entire surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat:\u003c\/strong\u003e Apply the wearing course or subsequent system layers within the recoat window specified in the TDS. Do not exceed the maximum recoat time without re-priming.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eLimitations\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNot intended as a final exposed wear surface — must be topcoated with an approved wearing course.\u003c\/li\u003e\n\u003cli\u003eDo not apply to substrates exceeding the maximum acceptable moisture level specified in the TDS.\u003c\/li\u003e\n\u003cli\u003eDo not apply below minimum temperature or when condensation or rain is expected before cure; confirm temperature requirements against the TDS.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the maximum recoat window without re-priming the surface.\u003c\/li\u003e\n\u003cli\u003eConfirm compatibility with the intended wearing course system before application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eStorage \u0026amp; Shelf Life\u003c\/h2\u003e\n\u003cp\u003eStore in original, unopened containers in a cool, dry, ventilated area away from direct sunlight, heat, and moisture. Confirm shelf life and storage temperature requirements against the product label and current TDS.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eHealth \u0026amp; Safety\u003c\/h2\u003e\n\u003cp\u003eRead the current Safety Data Sheet (SDS) before use. Contains isocyanate prepolymers — wear gloves, eye protection, and ensure adequate ventilation. Refer to the SDS for full hazard classification and first-aid measures.\u003c\/p\u003e\n\n\u003ch2 style=\"color:#1C4F8A;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat substrates is B-TUFF® 302 NG compatible with?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for use on concrete, plywood, and metal substrates after correct surface preparation. Confirm substrate-specific preparation requirements and system compatibility with the current TDS before application.\u003c\/p\u003e\n\n\u003ch3\u003eCan it be applied to damp concrete?\u003c\/h3\u003e\n\u003cp\u003eThe NG formula is moisture-tolerant and is designed for application over substrates with moderate residual moisture. Confirm the maximum acceptable moisture level against the current TDS and conduct moisture testing before application.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it need to be topcoated?\u003c\/h3\u003e\n\u003cp\u003eYes. B-TUFF® 302 NG is a basecoat and must be covered with a compatible B-TUFF wearing course or approved finish coat. It is not designed as a final exposed wear surface.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the recoat window?\u003c\/h3\u003e\n\u003cp\u003eThe recoat window is temperature and humidity dependent. Refer to the current TDS for specific recoat times. Do not exceed the maximum recoat window without re-priming the surface.\u003c\/p\u003e\n\n\u003cdiv style=\"border-left:4px solid #1C4F8A;background:#eef4fa;padding:12px 16px;margin:16px 0;border-radius:4px;\"\u003e\n\u003cstrong\u003ePurchasing Note:\u003c\/strong\u003e All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.\u003c\/div\u003e\n\n\u003chr\u003e\n\u003cp style=\"font-size:0.9em;color:#555;\"\u003e\u003cstrong style=\"color:#1C4F8A;\"\u003eCanopus Supply Inc.\u003c\/strong\u003e — Traffic Deck \u0026amp; Industrial Flooring Specialist, Metro Vancouver \u0026amp; BC\u003c\/p\u003e\n\u003cp style=\"font-size:0.85em;color:#777;\"\u003e\u003cem\u003eTechnical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and\/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"PSI","offers":[{"title":"5 gallon pail \/ Gray","offer_id":40081908727987,"sku":"","price":216.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/9483\/8195\/products\/b-tuff-302-ng-single-component-solvent-free-basecoat-for-concrete-plywood-and-metal-5906345.jpg?v=1776710893","url":"https:\/\/www.canopussupply.com\/en-us\/products\/b-tuff-302-ng-basecoat","provider":"Canopus Supply Inc","version":"1.0","type":"link"}