ResinTech TUE Transparent Epoxy Base Coat
✅ Usually In Stock — North Vancouver, BC. Call 250-233-3000 to confirm availability or arrange pickup.
ResinTech TUE 100% Solids Epoxy Base Coat
Two-Component, 100% Solids, Transparent Epoxy Base Coat | Brand: ResinTech
ResinTech TUE is a 100% solids, two-component transparent epoxy base coat for commercial and industrial concrete floor systems. It is used as a primer/base coat for flake, quartz, metallic and solid-colour systems, and as the epoxy layer in ResinTech traffic coating assemblies. For UV-exposed or exterior applications, specify a UV-stable aliphatic topcoat such as ResinTech HPP, TCU or CRU where required by the system design.
Professional system note: TUE is the epoxy base/primer layer in the ResinTech Traffic Coating System and is applied as part of the complete approved assembly. Confirm the full system specification, application sequence and recoat windows against the current ResinTech TDS before use.
Key Characteristics
- 100% solids, zero VOC — confirm ventilation requirements against the SDS.
- Transparent epoxy base coat — clear epoxy layer for flake, quartz, metallic and solid-colour systems.
- Zero shrinkage — confirm against the current TDS.
- Compatible with vinyl flake and quartz broadcast systems — confirm system compatibility against the current ResinTech TDS before ordering.
- UV exposure: TUE is a clear epoxy base coat. For long-term colour stability in UV-exposed or exterior applications, use a compatible UV-stable aliphatic topcoat such as ResinTech HPP, TCU or CRU as specified. Confirm system suitability against the current TDS, SDS and project specification.
Indicative Technical Data
The following data is provided for reference only and is subject to change. Always confirm current values against the manufacturer's TDS before specifying or ordering.
|
Pot Life ~40–60 min @ 21°C — confirm against TDS |
Coverage ~160–200 sq.ft/gal @ 8 mils DFT — confirm against TDS |
Recoat Window ~14–18 hrs @ 21°C — confirm against TDS |
|
Full Cure ~7 days — confirm against TDS |
Kit Size 15 L (4 US gal) |
System Step Over CBE prime coat — confirm against TDS |
Uses
- Clear epoxy base coat in the ResinTech Traffic Coating System.
- Base coat for vinyl flake and quartz broadcast decorative systems.
- Parkade and industrial floor coating systems.
Limitations
- Must be applied as part of the complete ResinTech system — confirm system specification before use.
- Pot life and cure times are temperature-dependent — confirm against the current TDS.
- Do not apply below minimum temperature or when substrate temperature is within 3°C of the dew point; confirm requirements against the TDS.
- Coverage varies with substrate porosity and application method — confirm against the TDS.
- For UV-exposed or exterior service, specify a UV-stable aliphatic topcoat over TUE as required by the system design.
Purchasing note: Intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, system compatibility, substrate condition, pickup timing and delivery requirements. Product selection and installation are the responsibility of the purchaser and installer.
Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.
