Sika® Florseal WB - 18 & - 25 ready - to - use; water - based, clear, high gloss, non - yellowing, acrylic emulsion cure and seal - Canopus Supply Inc
Sika® Florseal WB - 18 & - 25 ready - to - use; water - based, clear, high gloss, non - yellowing, acrylic emulsion cure and seal - Canopus Supply Inc
Sika® Florseal WB-18 & WB-25 | Water-Based Acrylic Concrete Cure & Seal
Sika

Sika® Florseal WB-18 & WB-25 | Water-Based Acrylic Concrete Cure & Seal

$184.00

Sika® Florseal WB-18 & WB-25 | Water-Based Acrylic Concrete Cure & Seal

Ready-to-Use Water-Based Acrylic Cure and Seal for Fresh Concrete | Brand: Sika

Sika Florseal WB is a ready-to-use water-based clear acrylic emulsion cure and seal compound for application to new concrete after final finishing operations. Available in WB-18 Standard (ASTM C309 Type 1, Class A) and WB-25 Premium (ASTM C309 & C1315 Type 1) grades. Confirm suitability, coverage, and application requirements against the current Sika TDS, SDS, and project specification before use.

Key Characteristics

  • Water-based acrylic formulation — ready to use; confirm dilution requirements against the current TDS.
  • Curing function — designed to retain mix water to support normal concrete hydration; confirm curing performance against the TDS and applicable standards.
  • Protective surface treatment — designed to reduce dusting and improve stain resistance after cure; confirm performance properties against the TDS and project specification.
  • High-gloss, clear finish — confirm appearance and sheen level against the TDS before specifying.
  • ASTM compliance — WB-18 meets ASTM C309 Type 1, Class A; WB-25 meets ASTM C309 & C1315 Type 1; confirm applicable standard for your project specification.

Grades Available

  • WB-18 Standard — ASTM C309 Type 1, Class A
  • WB-25 Premium — ASTM C309 & C1315 Type 1

Typical Applications

  • Curing and sealing fresh concrete slabs after final finishing
  • Protective surface treatment on interior and exterior concrete
  • Concrete floors, slabs, and flatwork

Limitations

  • Confirm substrate suitability and surface preparation requirements against the current TDS before use.
  • Not for use on concrete surfaces that will receive adhesive-bonded floor coverings without removal — confirm against the TDS.
  • Confirm application temperature and humidity requirements against the TDS.
Purchasing Note: All sales are intended for professional and trade purchasers. Before ordering, confirm product grade, suitability, quantity, substrate compatibility, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.

Canopus Supply Inc. — Sika Products, Metro Vancouver & BC

Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.